Skip to the content

LoRa

154 boards

KiCad boards from 84 GitHub repositories tagged “lora”, the most starred first; open any of them in PCBKit.

  • 4 layers50.1 × 85.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-R

    The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    89 parts4
  • 2 layers40 × 20 mmB E22 900M22S BRK R1.0, the printed circuit board in 3D

    B E22 900M22S BRK R1.0

    Boardoza/Boardoza_E22-900M22S_Long_Range_LoRa_Breakout_Board

    Long-range LoRa® breakout board based on the Ebyte E22-900M22S and Semtech SX1262 transceiver.

    13 parts3CC-BY-SA-4.0
  • 4 layers150 × 113 mmMesh IT, the printed circuit board in 3D

    Mesh IT

    Bored-guy-with-ADHD/Mesh-IT

    Mesh-IT is a LoRa-based off-grid communication device utilising meshtastic Software, designed for emergencies where a network is not available or unreliable.

    98 parts3MIT
  • 4 layers20 × 28.5 mmRfl, the printed circuit board in 3D

    Rfl

    hanneskiene/rfl

    SX1281 2.4Ghz RC Receiver/Transmiter

    47 parts3MIT
  • 2 layers85 × 85 mmEPS v1, the printed circuit board in 3D

    EPS v1

    Migsster/StormSat-CubeSat

    1U CubeSat avionics prototype with custom OBC/EPS/Payload PCBs, STM32 embedded firmware, LoRa TT&C, GNSS and Python mission analysis.

    40 parts3
  • 4 layers100 × 90 mmTmc2130 mip, the printed circuit board in 3D

    Tmc2130 mip

    Mipot-Hi-Tech/mip_servo_controller

    MIP Series Design and Firmware Example

    226 parts3
  • 2 layers40 × 16 mmUsb evp lora, the printed circuit board in 3D

    Usb evp lora

    cbalint13/usb-evp

    USB Event Packet (LoRA) Stick

    20 parts2GPL-3.0
  • 6 layers90.2 × 95.9 mmLora payload, the printed circuit board in 3D

    Lora payload

    dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb

    Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.

    403 parts2CERN-OHL-S-2.0
  • 2 layers39 × 27.3 mmDual chan, the printed circuit board in 3D

    Dual chan

    fadushin/nicerf-lora

    Kicad5 files for a NiceRF SX127x LoRa modem.

    16 parts2
  • 2 layers96 × 50 mmPager, the printed circuit board in 3D

    Pager

    justinlindh/bramble

    Privacy-first LoRa mesh networking for ESP32-S3, built with ESP-IDF

    97 parts2MIT
  • 2 layers28 × 58 mmLoRa TM, the printed circuit board in 3D

    LoRa TM

    NARAE-INHA-UNIV/LoRa_TM

    [2024 UAV 동계 방학] DIY Telemetry Module based Ebyte LoRa

    18 parts2GPL-3.0
  • 4 layers50.2 × 40.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-Mini

    The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    88 parts2
  • 2 layers55 × 40 mmE900M30S shield, the printed circuit board in 3D

    E900M30S shield

    sgofferj/E900M30S-shield

    Breakout board for eByte E22 SPI modules with CM4 footprint

    5 parts2CC-BY-SA-4.0
  • 4 layers49.5 × 39.4 mmLoRa133, the printed circuit board in 3D

    LoRa133

    chl33/LoRa133

    A base station for LoRa-based satellite sensor devices.

    22 parts1MIT
  • 2 layers65 × 56 mmDoppelLoraModulauf Raspi, the printed circuit board in 3D

    DoppelLoraModulauf Raspi

    DJ2RF/DoppelLoraModul-RaspberryPi-HAT

    Raspberry HAT for Nerdverlag LoRa Analyser or any other projects

    13 parts1MIT
  • 2 layers75 × 49 mmRak811-lora adaptable node, the printed circuit board in 3D

    Rak811-lora adaptable node

    galopago/rak811-lora-adaptable-node

    RAK811 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.

    23 parts1CC-BY-4.0
  • 2 layers75 × 49 mmRak4200-lora adaptable node, the printed circuit board in 3D

    Rak4200-lora adaptable node

    galopago/rak4200-lora-adaptable-node

    RAK4200 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.

    19 parts1CC-BY-4.0
  • 2 layers69.5 × 54.5 mmLoRa Tracker, the printed circuit board in 3D

    LoRa Tracker

    Gavinduachintha/Lora-Receiver

    Mini LoRa Tracker powered by a Raspberry Pi Pico 2 MCU.

    6 parts1Apache-2.0
  • 2 layers58.1 × 91.3 mmMeshcore solar, the printed circuit board in 3D

    Meshcore solar

    haydenkz/rak4630-solar-pcb

    Solar-powered MeshCore node PCB built around the RAK4630-8-SM-I (nRF52840 + SX1262 LoRa) module.

    55 parts1
  • 2 layers87 × 96.4 mmSTM32L0LoraTx vl53l, the printed circuit board in 3D

    STM32L0LoraTx vl53l

    joba-1/STM32L0LoraTx

    Send ADC voltage and other payload via LoRa RFM95W

    121 parts1
  • 4 layers204 × 150 mmGateway, the printed circuit board in 3D

    Gateway

    Kampi/IoT-Gateway

    Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.

    319 parts1
  • 2 layers50.3 × 30 mmISM02, the printed circuit board in 3D

    ISM02

    mlab-modules/ISM02

    ISM RF module with LoRa network capability

    55 parts1GPL-3.0
  • 4 layers33.1 × 61.2 mmBeagleBoneLoRaAdapter, the printed circuit board in 3D

    BeagleBoneLoRaAdapter

    VioletEternity/BeagleBoneLoRaAdapter

    Dual LoRa module adapter for BeagleBone

    13 parts1CERN-OHL-P-2.0