Skip to the content
2 layers39 × 27.3 mmDual chan, the printed circuit board in 3D

Kicad5 files for a NiceRF SX127x LoRa modem.

Size
39 × 27.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
23
Pads
63
Tracks, vias
140, 2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
31 Jul 2021
Updated
19 Mar 2022

Overview

Dual chan is an open-source printed circuit board by fadushin, from the fadushin/nicerf-lora repository on GitHub. It is a 2-layer board of 39 × 27.3 mm with 16 parts on 23 nets, routed with 140 tracks and 2 vias.

Its parts include 9 connectors, 4 capacitors and 2 resistors. It belongs with the radio and wireless boards of this library.

README

README.md

This repository contains KiCad5 files for a small (less than 1" square) 2-sided PCB that can be used to integrate a NiceRF SX127X (or equivalent) LoRa transceiver into your maker projects.

The NiceRF SX127X LoRa transceiver has some desirable properties, such as its small form factor, ability to integrate flexibly with ESP32 projects (unlike some integrated development boards), and it is probably one of the more affordable SX127X boards out there. In addition, the NiceRF team provides great support for their products.

This PCB adds support for:

  • One NiceRF SX127X module
  • 2.54mm pins for GND, +3.3v, MOSI, MISO, SCLK, NSS, RESET (optional), and DPIO_0 pins on the NiceRF board, making the board slightly easier to use with standard dupont wires or breadboards;
  • A set of pads for a standard IPEX antenna connector;
  • A 1206 SMT 10k ohm resistor for the RESET circuit;
  • Two 1206 SMT capacitors (optional).

Caveats:

  • Currently no support for DIO_1 and DIO_2 pins (but could be added easily);
  • Only tested on SX1276-915 modules;
  • Has not been tested with SWT or VNA meter for antenna circuit leakage or reflection.

This work is licensed under the terms of the BSD License 2.0. Enjoy!

Parts

16
QtyValueFootprintReferences
4Conn_01x08_FemaleConnector_PinSocket_2.00mm:PinSocket_1x08_P2.00mm_VerticalJ1, J2, J5, J6
2100nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C3
210kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
210uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C4
2Conn_01x02_Female0xFD:IPEX_Antenna_ConnectorJ3, J7
2Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4, J8
1Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ9

The 15 most common of 16 parts.

More from fadushin/nicerf-lora

2
  • 2 layers25.4 × 21.9 mmSx127x, the printed circuit board in 3D

    Sx127x

    fadushin/nicerf-lora

    Kicad5 files for a NiceRF SX127x LoRa modem.

    7 parts2
  • 2 layers25.4 × 24.1 mmSx1262, the printed circuit board in 3D

    Sx1262

    fadushin/nicerf-lora

    Kicad5 files for a NiceRF SX127x LoRa modem.

    7 parts2

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Dual chan PCB?

It measures 39 × 27.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dual chan use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dual chan KiCad files?

From the fadushin/nicerf-lora repository on GitHub, at the commit this page was made from: the board is dual-chan/project.kicad_pcb and its schematic dual-chan/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dual chan design in my own project?

Its repository states no licence, so its author keeps all rights: ask fadushin before reusing the design.