2 layers100.8 × 30.2 mm
Esp32 loraprs c3
sh123/esp32_loraprs
LoRa ESP32 KISS Bluetooth modem (for APRSDroid or aprs.fi iOS) + APRS-IS RX/TX iGate over WiFi + Digipeater + DV (with Codec2 Walkie-Talkie)
29 parts281GPL-3.0
LoRa
154 boardsKiCad boards from 84 GitHub repositories tagged “lora”, the most starred first; open any of them in PCBKit.
- 2 layers67 × 28 mm
- 2 layers40 × 95.3 mm
Lora tracker
sh123/esp32_loradv
ESP32 based Codec2/OPUS DV hobby UHF 3d printed handheld transceiver aka walkie-talkie
34 parts127GPL-2.0 - 2 layers57 × 35.5 mm
- 2 layers72 × 27 mm
- 2 layers61.5 × 18.7 mm
LoRA USBStick
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
36 parts50GPL-3.0 - 2 layers51 × 23.1 mm
Feather rak3172
teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board
53 parts43MIT - 2 layers22.9 × 50.8 mm
Penguino STM32WL LoRa E5
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
58 parts42 - 4 layers66.9 × 87 mm
MeshtasticNode BQ25185
h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
49 parts40CERN-OHL-S-2.0 - 2 layers31.5 × 36.1 mm
ResQ KiCad Version
MKme/ResQ
Open Source Search and Rescue Tool for ground tracking and air tracking cell phone signatures using Espressif ESp32 and ESP8266 hardware.
10 parts40 - 2 layers65.4 × 63 mm
LoRa Gateway E220
ezcGman/lora-gateway
Gateway to create a bridge between your LoRa devices and Wi-Fi or Ethernet. Also comes with ready-to-use code to drop everything into your MQTT server!
15 parts39 - 2 layers36.8 × 90.9 mm
Bwlr1e
teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
65 parts36MIT - 2 layers23.9 × 26 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28 - 4 layers77.2 × 24.4 mm
Meshimi
alexbegoon/meshimi
Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.
27 parts26GPL-3.0 - 2 layers58.9 × 19.3 mm
Lora digirepeater micro
sh123/micro_loraprs
Arduino Micro LoRA/FSK USB KISS modem (for Linux AX.25, APRSDroid, Codec2Talkie) or standalone APRS AX.25 micro digirepeater
9 parts26GPL-2.0 - 2 layers47.9 × 67.7 mm
- 4 layers160 × 94 mm
MeshCrossway RevA LAYOUT A
Renbrant/MeshCrossway
MeshCrossway is an open-source, ESP32-based portable communicator designed to connect travelers and search-and-rescue teams across Meshtastic and MeshCore networks in parallel, with dedicated LoRa radios, a touchscreen…
39 parts24MIT - 2 layers36.8 × 90.9 mm
Bwlr3d
teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting
108 parts18MIT - 6 layers144.8 × 106.7 mm
- 2 layers50 × 100 mm
Spoke
FeruzTopalov/spoke
Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph
143 parts16GPL-3.0 - 2 layers38.6 × 72.1 mm
- 2 layers105 × 65 mm
MoleNet V5.2.2
ComNets-Bremen/MoleNet
MoleNet: A Wireless Underground Sensor Network platform
71 parts13GPL-3.0 - 2 layers38.7 × 20.3 mm
Cat tracker
dpeckett/cat-tracker
An active RFID system for locating free roaming pets / wildlife.
7 parts12CC0-1.0