Skip to the content
PCBKitNew board

Firmware

299 boards

KiCad boards from 137 GitHub repositories tagged “firmware”, the most starred first; open any of them in PCBKit.

  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587
  • 2 layers60 × 37 mmHydraBus, the printed circuit board in 3D

    HydraBus

    hydrabus/hydrabus

    HydraBus open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware

    71 parts359
  • 4 layers82.5 × 81.5 mmFanpico, the printed circuit board in 3D

    Fanpico

    tjko/fanpico

    Fanpico: Open Source Programmable PWM (PC) Fan Controller

    113 parts239GPL-3.0
  • 2 layers43.2 × 17.6 mmOtterPill, the printed circuit board in 3D

    OtterPill

    Jana-Marie/OtterPill

    stm32f072 dev board with arduino nano alike pinout

    37 parts162
  • 2 layers285 × 94.6 mmSgh60, the printed circuit board in 3D

    Sgh60

    sago35/tinygo-keyboard

    USB HID keyboard firmware for tinygo

    155 parts119MIT
  • 2 layers69.2 × 20.8 mmFastusbasp v2, the printed circuit board in 3D

    Fastusbasp v2

    amitesh-singh/FASTUSBasp

    This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.

    25 parts106
  • 2 layers141.4 × 115.9 mmKapl, the printed circuit board in 3D

    Kapl

    keyzog/kapl

    The Kapl is a split ergonomic keyboard with 70 keys (7x5)

    128 parts88MIT
  • 2 layers280.2 × 132.1 mmMidi mixer one, the printed circuit board in 3D

    Midi mixer one

    markwheeler/midi-mixer-one

    MIDI Mixer One is a mixer-style MIDI controller built around Teensy. Includes hardware designs, firmware and a web config tool.

    72 parts65
  • 4 layers137 × 141 mmPcb panel, the printed circuit board in 3D

    Pcb panel

    0xCB-dev/0xCB-1337

    Mechanical macropad with OLED running QMK

    485 parts61
  • 2 layers164 × 73 mmTestRig PCB, the printed circuit board in 3D

    TestRig PCB

    RasmusB/USB-Keyboard-Adapter

    An Psion to USB keyboard controller

    95 parts57
  • 2 layers68.6 × 53.3 mmRescueAVR, the printed circuit board in 3D

    RescueAVR

    felias-fogg/RescueAVR

    An Arduino sketch that is able to do high-voltage programming in order to resurrect bricked AVR MCUs (you need a bit of HW on a breadboard or some special Arduino shields as well)

    24 parts56
  • 2 layers219.1 × 76.2 mmLoongcat40, the printed circuit board in 3D

    Loongcat40

    ChrisChrisLoLo/loongcat40

    loongcat is loooooong

    94 parts42GPL-3.0
  • 2 layers303 × 104.5 mm42, the printed circuit board in 3D

    42

    nglgzz/42

    42 keys ergonomic keyboard

    85 parts41MIT
  • 2 layers25.4 × 45.7 mmRf bridge, the printed circuit board in 3D

    Rf bridge

    buserror/rf_bridge

    RF (433Mhz) to MQTT Bridge - with hardware

    16 parts39
  • 2 layers23 × 45 mmCell monitor, the printed circuit board in 3D

    Cell monitor

    scttnlsn/cell-monitor

    Battery cell monitor and balancer

    13 parts39MIT
  • 2 layers70 × 151 mmDm50, the printed circuit board in 3D

    Dm50

    xavierbasc/dm50

    DM50 is a cheap, powerful, easy to build, open source hardware, and high precision calculator.

    131 parts38GPL-3.0
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 2 layers56.6 × 57.7 mmTashTwenty Tiny, the printed circuit board in 3D

    TashTwenty Tiny

    lampmerchant/tashtwenty

    An interface for the DCD protocol used by Apple's Hard Disk 20.

    31 parts35GPL-3.0
  • 4 layers31 × 15 mmSt link, the printed circuit board in 3D

    St link

    lbthomsen/st-link

    ST-Link Research

    37 parts31
  • 4 layersWatch, the printed circuit board in 3D

    Watch

    BenjaminSoelberg/elektronika-1

    A replacement module for the USSR vintage LED watch Elektronika-1 anno 1978

    19 parts30GPL-3.0
  • 2 layers56 × 110 mmTrs pcb, the printed circuit board in 3D

    Trs pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    125 parts28
  • 4 layers25.3 × 35.1 mmAgb hifi audio pcb, the printed circuit board in 3D

    Agb hifi audio pcb

    cajunpanda/gameboy-hifi-audio

    A HiFi audio mod for various Game Boy models

    66 parts25MIT