2 layers114 × 61.4 mm
3D printing
326 boardsKiCad boards from 170 GitHub repositories tagged “3d-printing”, the most starred first; open any of them in PCBKit.
- 2 layers36 × 20 mm
- 4 layers99.6 × 76.2 mm
- 2 layers45 × 28.5 mm
Toolhead board
SnakeOilXY/SnakeOil-XY
Fully open source configurable high speed CoreXY 3D printer.
11 parts450GPL-3.0 - 2 layers50 × 90 mm
- 2 layers228.6 × 100 mm
Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 4 layers70 × 54 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0 - 2 layers
- 2 layers217.6 × 68.1 mm
Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
93 parts202CC-BY-SA-4.0 - 2 layers285 × 94.6 mm
- 2 layers15.3 × 19.3 mm
Kicad hx711 tyny85
IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.
18 parts150GPL-3.0 - 2 layers285 × 94.6 mm
PH60Slim Choc
ph-design/PH60-SC
A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.
219 parts132 - 2 layers70.5 × 26.5 mm
Maclock breakout
wr/macintosh-mini
The fastest way to install classic Mac OS on a Maclock + USB, sound, buttons, and brightness control
10 parts124 - 8 layers100 × 60 mm
YAMMU ControlBoard v05
Zergie/YAMMU
A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.
234 parts107GPL-3.0 - 2 layers76.2 × 69.9 mm
Startrckr pcb
NikodemBartnik/StarTrckr
Open source star tracker for deep sky astrophotography
59 parts98 - 2 layers51.6 × 23.9 mm
Zero Palm V1
molanocortes/takto-one
Open-source hand exoskeleton that reads twelve finger joints with magnetic encoders and drives them through tendons. Full build (TAKTO ONE) or sensing-only (TAKTO Lite).
56 parts83 - 2 layers43 × 13 mm
Dchub 4port strip v1 1
7757/fanduck
超能花钱鸭 Fanduck · Microduck 已复刻成功！分享实机演示、物料清单、3D 打印、板件、制作工具与 3D 镜像工作台。Build resources from our completed Microduck replica.
6 parts81 - 2 layers
Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers98.5 × 45.4 mm
Idawgz32
ChrisChrisLoLo/idawgz32
A full 32 key mechanical keyboard that can be made for only $5
81 parts77GPL-3.0 - 4 layers48.8 × 53.1 mm
ESC Board
FPV-Drone-STM32F411/DroneController
All-in-one FPV drone PCB with integrated flight controller, PDB, and ESCs built around STM32F411.
73 parts60 - 2 layers48.3 × 48.3 mm
Shutter speed tester
sebastienroy/shutter_speed_tester
A project which goal is to design and build a tool that allows to test the shutter speed accuracy of a film camera
17 parts51GPL-3.0 - 2 layers224.8 × 89.9 mm
Qalble
somepin/qalble
An Alice-like 35% 3d printed mechanical keyboard using ItsyBitsy dev boards
81 parts51GPL-3.0