Skip to the content
PCBKitNew board

IoT

408 boards

KiCad boards from 252 GitHub repositories tagged “iot”, the most starred first; open any of them in PCBKit.

  • 2 layers20.3 × 24.5 mmExamples, the printed circuit board in 3D

    Examples

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    46 parts546MIT
  • 4 layers25.4 × 58.5 mmShrike lite, the printed circuit board in 3D

    Shrike lite

    vicharak-in/shrike

    Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.

    60 parts537GPL-2.0
  • 4 layers50 × 87 mmEnergyMe Home, the printed circuit board in 3D

    EnergyMe Home

    jibrilsharafi/EnergyMe-Home

    Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)

    87 parts288GPL-3.0
  • 2 layers100.8 × 30.2 mmEsp32 loraprs c3, the printed circuit board in 3D

    Esp32 loraprs c3

    sh123/esp32_loraprs

    LoRa ESP32 KISS Bluetooth modem (for APRSDroid or aprs.fi iOS) + APRS-IS RX/TX iGate over WiFi + Digipeater + DV (with Codec2 Walkie-Talkie)

    29 parts281GPL-3.0
  • 2 layers129.5 × 50.8 mmLilka, the printed circuit board in 3D

    Lilka

    lilka-dev/lilka

    Схема та документація ігрової консолі Lilka

    39 parts234GPL-2.0
  • 2 layers50 × 38 mmPcb smd, the printed circuit board in 3D

    Pcb smd

    tenderlove/esp8266aq

    ESP8266 and Plantower AQ sensor

    24 parts220
  • 2 layers39 × 40 mmMdb ai bridge esp32s3, the printed circuit board in 3D

    Mdb ai bridge esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    92 parts190MIT
  • 6 layers54.6 × 57.1 mmCM5 MINIMA 2, the printed circuit board in 3D

    CM5 MINIMA 2

    piecol/CM5_MINIMA_REV2

    Compact, feature-filled CM5 carrier board

    102 parts170CERN-OHL-S-2.0
  • 4 layers119 × 79 mmLuxdmx, the printed circuit board in 3D

    Luxdmx

    tombueng/LuxDMX

    Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.

    97 parts97
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 2 layers86 × 86 mmProduction, the printed circuit board in 3D

    Production

    kerikun11/IR-Station

    Infrared Remote Controller with ESP8266 WiFi-module. You can control your home appliances with your smartphone or laptop.

    128 parts54MIT
  • 2 layers87.5 × 70 mm010 Implementation, the printed circuit board in 3D

    010 Implementation

    NewTec-GmbH/esp32-can-iot

    A ESP32 based interface between CAN-bus and IoT environments.

    70 parts51BSD-3-Clause
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 2 layers89.2 × 103.5 mmOas, the printed circuit board in 3D

    Oas

    hubertciebiada/open-ambient-sensor

    OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration

    64 parts44GPL-3.0
  • 2 layers51 × 23.1 mmFeather rak3172, the printed circuit board in 3D

    Feather rak3172

    teapotlaboratories/feather-rak3172

    Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board

    53 parts43MIT
  • 2 layers47.2 × 55.5 mmTinta l2, the printed circuit board in 3D

    Tinta l2

    c0de111/tinta

    Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.

    60 parts39Apache-2.0
  • 2 layers33 × 61 mmIoT Power Meter schematics, the printed circuit board in 3D

    IoT Power Meter schematics

    Nurgak/Internet-of-Things-Power-Meter

    Device to view household power consumption

    9 parts37
  • 2 layers36.8 × 90.9 mmBwlr1e, the printed circuit board in 3D

    Bwlr1e

    teapotlaboratories/bwlr1e

    Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

    65 parts36MIT
  • 6 layers68.9 × 47.5 mmMowi, the printed circuit board in 3D

    Mowi

    septentrio-gnss/mowi

    Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module

    283 parts35
  • 2 layers79.2 × 59.2 mmGpstracker, the printed circuit board in 3D

    Gpstracker

    blemasle/gpstracker-pcb

    Connected GPS tracker PCB

    205 parts33MIT
  • 2 layers43.3 × 37.6 mmZBSmartMeter, the printed circuit board in 3D

    ZBSmartMeter

    Tropaion/ZigBee_SmartMeter_Reader

    This is a ZigBee device to collect data from smartmeters using the DLMS/COSEM protocol.

    37 parts32GPL-3.0
  • 2 layers84.5 × 80.3 mmSpore, the printed circuit board in 3D

    Spore

    PWRFLcreative/Spore

    Spore WiFi LED module. Firmware and Hardware.

    85 parts28GPL-3.0
  • 2 layers50 × 25 mmLoRa Environmental Sensors, the printed circuit board in 3D

    LoRa Environmental Sensors

    spielhuus/LoRa-Environmental-Sensors

    ATtiny85 based LoRa atmospheric sensor board with BME280

    5 parts28
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT