4 layers45 × 16.5 mm
HadesGPSDongle
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
27 parts1kBSD-3-Clause
4 layers77.2 × 24.4 mm
Meshimi
alexbegoon/meshimi26Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.
- Size
- 77.2 × 24.4 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 27
- Nets
- 34
- Pads
- 137
- Tracks, vias
- 266, 55
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jul 2025
- Updated
- 29 Sep 2026
Overview
Meshimi is an open-source printed circuit board by alexbegoon, from the alexbegoon/meshimi repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 77.2 × 24.4 mm with 27 parts on 34 nets, routed with 266 tracks and 55 vias.
Its parts include 6 capacitors, 5 resistors, 5 connectors and 4 ICs. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
README
README.mdMeshimi
Open Hardware & Open Source Multi-Protocol Wireless Module
Meshimi empowers your Flipper Zero with advanced mesh networking capabilities, utilizing Meshtastic, LoRaWAN, WiFi6 and Bluetooth protocols.
📁 Repository Structure
hardware/- PCB schematics, layouts, and production filesmechanical/- 3D models, enclosures, and assembly guidesfirmware/- Core firmware and code examplessoftware/- Flipper Zero app and configuration toolsdocumentation/- Documentation, guides, and certificationsassets/- Logos, photos, and marketing materials
📖 Documentation
🛡️ Certifications
Meshimi project utilizes pre-certified RF modules to ensure regulatory compliance. The corresponding CE, FCC, and other certification documentation for these modules are available in the certifications directory.
We are committed to maintaining full regulatory compliance.
Seeed XIAO ESP32-C6 module is used in Meshimi, which has the following certifications:
Seeed Wio SX-1262 module is used in Meshimi, which has the following certifications:
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470n | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7 |
| 4 | ~ | MountingHole:MountingHole_3mm_Pad_Via | H1, H2, H3, H4 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J4, J5 |
| 1 | 10m | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 300k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J2 |
| 1 | MAX17261xxWL | Fuel Gauge MAX17261:Maxim_WLP-9_1.595x1.415_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mm_NSMD | U4 |
| 1 | Module:MODULE12P-1.27-11X11.6MM | Wio-SX1262:Wio-SX1262 | U1 |
| 1 | XC6206P331MR-G | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | XIAO-ESP32-C6-SMD | Seeed Studio XIAO Series Library:XIAO-ESP32C6-SMD | U2 |
| 1 | ~ | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
Similar boards
- 4 layers44.5 × 50 mm
- 4 layers27.8 × 24 mm
Powerdet breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
27 parts205 - 4 layers84.3 × 69.8 mm
- 4 layers148.3 × 62.6 mm
Hardware V2
MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.
27 parts47MIT - 4 layers55 × 44.6 mm
- 4 layers71 × 34 mm
- 4 layers214 × 142 mm
Questions
How big is the Meshimi PCB?
It measures 77.2 × 24.4 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Meshimi use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meshimi KiCad files?
From the alexbegoon/meshimi repository on GitHub, at the commit this page was made from: the board is hardware/v1.0/Meshimi.kicad_pcb and its schematic hardware/v1.0/Meshimi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meshimi design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).