2 layers100.8 × 30.2 mm
Esp32 loraprs c3
sh123/esp32_loraprs
LoRa ESP32 KISS Bluetooth modem (for APRSDroid or aprs.fi iOS) + APRS-IS RX/TX iGate over WiFi + Digipeater + DV (with Codec2 Walkie-Talkie)
29 parts281GPL-3.0
LoRaWAN
46 boardsKiCad boards from 37 GitHub repositories tagged “lorawan”, the most starred first; open any of them in PCBKit.
- 2 layers72 × 27 mm
- 2 layers61.5 × 18.7 mm
LoRA USBStick
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
36 parts50GPL-3.0 - 2 layers22.9 × 50.8 mm
Penguino STM32WL LoRa E5
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
58 parts42 - 2 layers36.8 × 90.9 mm
Bwlr1e
teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
65 parts36MIT - 2 layers23.9 × 26 mm
- 4 layers77.2 × 24.4 mm
Meshimi
alexbegoon/meshimi
Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.
27 parts26GPL-3.0 - 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 2 layers51.7 × 29.2 mm
AVR LORA-805
tomtor/STM32-RFM95-PCB
STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip
39 parts20GPL-3.0 - 2 layers98 × 83.8 mm
Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers36.8 × 90.9 mm
Bwlr3d
teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting
108 parts18MIT - 2 layers53 × 45 mm
XIAO nRF54L15 V1
hmd83/tanen
LoRaWAN beehive monitor: hive weight, temperature and battery over TTN. Seeed XIAO nRF54LM20A + SX1262, Zephyr/nRF Connect SDK. ~4 uA sleep, ~10 year life on 3X AAA cell.
19 parts17Apache-2.0 - 2 layers93.9 × 83.8 mm
Backplane
dbrgn/ic880a-backplane
Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes, a temperature / humidity sensor, a step-down voltage regulator, an ADC to…
72 parts15 - 2 layers38.6 × 72.1 mm
- 2 layers81.3 × 56 mm
Rasp heltec lora hat
phfbertoleti/shield_hat_RaspLoRaWAN_plus
Repositório oficial do shield/hat RaspLoRaWAN+
21 parts12MIT - 4 layers48 × 45.5 mm
LoRaHarvesterBox
h0lad/LoRaHarvesterBox
PCB integrating a ST STM32WLE5CC and TI BQ25570 energy harvester. Ideal platform for ultra-low-power LoRa(WAN) nodes projects.
46 parts11CERN-OHL-S-2.0 - 2 layers51.8 × 53.6 mm
CatWAN Farmer
ElectronicCats/CatWAN_Farmer
CatWAN Farmer, a grower's water saving open source project with LoRa
53 parts7 - 2 layers63.5 × 43 mm
OSR RN
Open-Things-Network/lora-dev-board
Uniwersalna platforma sprzętowa na warsztaty i do prototypowania
77 parts6MIT - 2 layers45 × 50 mm
ProMini Node v1.0-50x50
makervan/promini-node
LoRaWAN node using the Arduino Pro Mini and RFM95 LoRa module
20 parts5 - 2 layers67.2 × 79.8 mm
IC880A shield v1.2
SIMATICmeetsLinux/IOT2050-LoRaGateway-Arduino
Instructions for using the IOT2050 as a LoRaWAN (Long Range Wide Area Nework) gateway with The Things Network as the network server. LoRaWAN Concentrator is realized with an Arduino Shield.
29 parts5MIT - 2 layers56 × 47 mm
Agriot sensor
AngelJMC/agriot-sensor-node
Open Source hardware/software platform for the rapid and low-cost development of LoRaWAN sensor nodes
30 parts4GPL-3.0 - 2 layers58.4 × 64.8 mm
Project embeddedSystemDesign2
Fescron/Project-LabEmbeddedDesign2
Project-LabEmbeddedDesign2
41 parts3GPL-3.0 - 2 layers34.8 × 80 mm
Powermeter loranode v1
makervan/powermeter-lorawan-connector
LoRaWAN node to send data from the GC90/GC91 DC power meters via TTN (Arduino Pro Mini, RFM95)
25 parts3 - 4 layers100 × 90 mm
