
OpenRX panel rev2.2
OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

SX1281 2.4Ghz RC Receiver/Transmiter
Rfl is an open-source printed circuit board by hanneskiene, from the hanneskiene/rfl repository on GitHub, published under the MIT licence. It is a 4-layer board of 20 × 28.5 mm with 47 parts on 71 nets, routed with 439 tracks and 127 vias.
It is built around the SE2431L-R, 2450FM07D0034001T and TPS7A19DRB, with the USBLC6-2SC6 and CPDQC3V3C-HF among its other parts. Its parts include 15 capacitors, 13 resistors, 7 diodes, 5 ICs and 5 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.
4ch RC receiver/transmitter with switched diversity antennas to retrofit 35MHz remotes.


QFN parts need a reflow oven/hot air station, the rest is 0402 or larger.

First prototype implementation with fixed frequency hopping table, very simple Rx-antenna diversity is "useable". The firmware currently checks for a valid PPM input if thats not found switches to receiver mode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C13, C14 |
| 4 | 100R | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R11 |
| 4 | CPDQC3V3C-HF | Diode_SMD:D_0402_1005Metric | D3, D4, D5, D6 |
| 3 | 1k2 | Resistor_SMD:R_0402_1005Metric | R3, R4, R7 |
| 3 | 4u7 | Capacitor_SMD:C_1206_3216Metric | C801, C802, C813 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R5 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R801, R802 |
| 2 | 636101111001 | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J3 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 16k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2450FM07D0034001T | rfl-lib-fp:2450FM07D0034001T | FL1 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 52MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 629722000214 | rfl-lib-fp:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J801 |
| 1 | 6p8 | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | Conn_01x14 | rfl-lib-fp:PinHeader_2x07_P2.54mm_Edge | J2 |
| 1 | SE2431L | Package_DFN_QFN:QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm | U4 |
| 1 | STM32G0B1KETxN | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SX1281 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | TPS7A19 | Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm | U3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U801 |
| 1 | swd | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J802 |
| 1 | ~ | Diode_SMD:D_SMF | D101 |

OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

logitiles/HEXBERRY-V-20Q100-0.91
Open Hardware FPGA platform

anyo2002/tedun-digital-electronics-board
Digital Electronics Board (TEDUN) developed for an Embedded Systems course at UNAL, including FPGA integration, schematic design, and embedded interfaces.


uzzambutt/NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz
Nano 2.4 GHz ExpressLRS Diversity PA/LNA Receiver

LongDo1902/STM32_Drone
Developing quadcopter from scratch including stm32 programing and self-built flight controller PCB.

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

Paschalis/fc-plus-sensor-module
FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.
It measures 20 × 28.5 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the SE2431L-R, 2450FM07D0034001T, TPS7A19DRB and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hanneskiene/rfl repository on GitHub, at the commit this page was made from: the board is rfl/rfl.kicad_pcb and its schematic rfl/rfl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).