
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

Mesh-IT is a LoRa-based off-grid communication device utilising meshtastic Software, designed for emergencies where a network is not available or unreliable.
Mesh IT is an open-source printed circuit board by Bored-guy-with-ADHD, from the Bored-guy-with-ADHD/Mesh-IT repository on GitHub, published under the MIT licence. It is a 4-layer board of 150 × 113 mm with 98 parts on 106 nets, routed with 797 tracks and 26 vias.
It is built around the SS14 and SS8050. Its parts include 36 diodes, 36 switches, 6 ICs, 4 resistors and 3 capacitors. It belongs with the radio and wireless and power boards and the ESP32 boards of this library.
Mesh-IT is a handheld LoRa mesh messaging device designed for offline communication. It is built around the Seeed Studio Xiao ESP32-S3 and the Wio-Sx1262 LoRa Module The Device Has a 2.8-inch colour TFT display, a 5x7 keyboard matrix, joystick navigation, GPS support, and a custom transparent 3D-printed enclosure
I wanted to build something that feels like a real product, not something held by tape and hopes. I made this to solve a critical problem: communication in rural areas I chose LoRa for a reason, it has excellent range and is low power, and it's cheap, costing around 60$ for 1 unit of Mesh-IT
original workspace link (https://cad.onshape.com/documents/f08658297db9b835bf0cb4c0/w/964f5e8aa7a9c980c94da242/e/11eb6b47f6372a176f6b115a?renderMode=0&uiState=6a3ea8e317568eae833ef321)
This repo is divided into 3 main folders
To flash the firmware, you will need to open the Meshtastic web flasher (https://flasher.meshtastic.org/) Then, in the select target section, select Seed Studio Xiao, then select your firmware file and hit flash
Schematic and research took me around 25 hours and making the PCB took around 45 hours and 3d enclosure took around 30 hours of trial and error
Special thanks to the Meshtastic team for open-source software
This project is open-source and released under the MIT license
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +20 |
| 35 | 1N4148 | Diode_SMD:D_MiniMELF | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19 |
| 3 | LOGO | LOGO | ., ., G*** |
| 2 | 0.1uf | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C4 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R5 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2 |
| 1 | Battery_Cell | XIAO S3:3000Mah battrey uh | BATTREY,HERE |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | L89 | GPS fotprints:XCVR_L89 | GPS1 |
| 1 | SS14 | Diode_SMD:D_SMA | D36 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TCA8418RTWR | XIAO S3:QFN50P400X400X80-25N | U7 |
| 1 | XIAO-ESP32-S3-DIP | Library:XIAO-ESP32S3-DIP | U1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U5 |
| 1 | ~ | SUXI XIAOESPS3:2.8 inch tft display | u3 |
| 1 | ~ | XIAO S3:New Joystick | U6 |
| 1 | ~ | XIAO S3:io expander | U2 |
The 92 most common of 98 parts.

SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe

4rynv/Eklavya_Gantry
an attempt to automate screwing out and in of screw holes arranged in a matrix formation

ampnics/CAN-to-WiFi-Converter-Dongle-
CAN to WiFi Converter PCB using ESP32! This step-by-step tutorial covers schematic creation, PCB layout, and best practices for signal integrity. Perfect for automotive and IoT applications!

Markuselectronics/DIY-USB-C-Reflow-Hotplate
A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.

TheWasian/Ultrasonic-Whack-A-Mole
An interactive 3D Whack-A-Mole game powered by ESP32 microcontrollers and ultrasonic sensors, using real-time motion tracking to turn physical movement into gameplay.

AlexMirt2/EKG-signal-acquisition-and-processing-system
The diploma project focuses on designing and implementing an ECG signal acquisition and processing system. It includes smart devices capable of transmitting data to the cloud.

It measures 150 × 113 mm and has 4 copper layers, 1.6 mm thick.
98 parts, built around the SS14 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bored-guy-with-ADHD/Mesh-IT repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad files/Mesh_IT.kicad_pcb and its schematic Hardware/KiCad files/Mesh-IT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).