

A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.
- Size
- 89 × 38 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 85
- Pads
- 301
- Tracks, vias
- 566, 163
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jan 2026
- Updated
- 5 Feb 2026
Overview
HotPlate is an open-source printed circuit board by Markuselectronics, from the Markuselectronics/DIY-USB-C-Reflow-Hotplate repository on GitHub. It is a 4-layer board of 89 × 38 mm with 82 parts on 85 nets, routed with 566 tracks and 163 vias.
It is built around the STM32F103C8T6, MAX6675ISA+T and TPS54331DR-JSM, with the AO4485, ESDA25P35-1U1M and SS14 among its other parts. Its parts include 23 capacitors, 22 resistors, 8 diodes, 5 connectors and 4 ICs. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
11STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MAX6675ISA+T
SOIC-8-20℃~+85℃ 12 1500uA 3V~5.5V Low noise front-end、Built-in temperature sensor SPI Thermocouple-to-Digital Converter SOIC-8 ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADCs/DACs - Special PurposeTPS54331DR-JSM
SOP-8-40℃~+125℃ 1 2mA 3A 4.5V~40V 400kHz Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type SOP-8 DC-DC Converters ROHSJSMSEMIDC-DC ConvertersAO4485
SOIC-8-55℃~+150℃ 1 P-Channel 1.7V 10A 15mΩ@10V 180pF 3.1W 3nF 40V 55nC@10V SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsESDA25P35-1U1M
DFN1610-2-55℃~+150℃ 1 1.4kW@8/20us 200nA 22V 24.6V 35A@8/20us 41V IEC 61000-4-2 TVS Unidirectional DFN1610-2 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesESDA25W
SOT-323-3L-40℃~+125℃ 15A 1uA 2 24V 25V 25V 400W 65pF ESD IEC 61000-4-2 Unidirectional SOT-323-3L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)MDD50N03D
TO-252-50℃~+150℃ 1 N-channel 1.015nF 1.5V 164pF 201pF 23.6nC 28W 30V 50A 6.5mΩ@10V、8.3mΩ@4.5V TO-252 MOSFETs ROHSMDDMOSFETsSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.md🔥 DIY USB-C PD Reflow Hotplate
A professional, pocket-sized soldering hotplate powered by USB-C Power Delivery.
This repository contains all design files for the project. 👉 Full Tutorial & Guide: [Link to your Instructables Page]
📂 Repository Structure
/Manufacturing: Gerber files for JLCPCB.HotPlate.zip(Use SMT Assembly)Plate(Order as Aluminum PCB!)
/Firmware: Source code for the STM32 microcontroller.
⚠️ Warning
Hot Surface! This device reaches 250°C+. Use with caution.
🤝 Credits
Huge thanks to JLCPCB for sponsoring the PCBs for this project.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R9, R11, R14, R17, R18, R19, R22 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C8, C11, C13, C14, C18, C22 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C17, C21 |
| 4 | 4k7 | Resistor_SMD:R_0805_2012Metric | R12, R13, R20, R21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C12 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C19, C20 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric | C10, C15 |
| 2 | AO4485 | MyFootprints:SOIC127P600X175-8N | Q5, Q6 |
| 2 | ESDA25P35-1U1M | MyFootprints:TVS_ESDA25P35-1U1M | D2, D3 |
| 2 | SS14 | Diode_SMD:D_SMA | D5, D6 |
| 2 | TS-1088-AR02016 | MyFootprints:SW_TS-1088-AR02016 | S1, S3 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | 18uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D7 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 3k9 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4k99 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 6n8 | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | X1 |
| 1 | 8n2 | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical | J2 |
| 1 | ESDA25W | Package_TO_SOT_SMD:SOT-323_SC-70 | D4 |
| 1 | G*** | kibuzzard-6914F22F | kibuzzard-6914F22F |
| 1 | G*** | kibuzzard-6914F142 | kibuzzard-6914F142 |
| 1 | G*** | kibuzzard-6914F211 | kibuzzard-6914F211 |
| 1 | G*** | kibuzzard-6914F240 | kibuzzard-6914F240 |
| 1 | G*** | kibuzzard-6914F203 | kibuzzard-6914F203 |
| 1 | Heating Element | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | MAX6675ISA_ | MyFootprints:SOIC127P600X175-8N | U4 |
| 1 | MDD50N03D | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | OLED-Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STUSB4500QTR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U2 |
| 1 | TPS54331DR | Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm | U3 |
| 1 | Thermocouple | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | USB-C | MyFootprints:SHOU HAN TYPE-C 16PIN 2MD(073) | J1 |
| 1 | green | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | yellow | Diode_SMD:D_0805_2012Metric | D8 |
Similar boards
- 2 layers54 × 33 mm

- 2 layers40.6 × 49.8 mm

Reflow Project Kicad
Sensei82013/Reflow-Oven
STM32F103 reflow oven controller: K-type thermocouple via MAX6675, 160 W element through a solid state relay, on-MCU PI loop, browser UI over SWD, and a 7in Nextion panel in progress.
51 parts - 2 layers120 × 100 mm

Usb pd pico controller
flummer/sao-wall
Design for a SAO display PCB, power and control board
64 parts2CC-BY-SA-4.0 - 6 layers120 × 70 mm

Healthypi 6 v5
Protocentral/protocentral_healthypi6_hardware
Open hardware design files for HealthyPi 6 — STM32H757 vital-signs monitor with the HealthyLink modular expansion bus
247 parts2CERN-OHL-P-2.0 - 2 layers38 × 24 mm

BMS
SMalasGit/2s-BMS
A repository for a 2s lithium ion BMS that utilizes the BQ28Z620. This IC is an all-in-one chip that features battery protection, cell balancing, battery charging, battery current and voltage monitoring, and gas gauging…
82 parts2 - 4 layers90 × 60 mm

Bench psu
PaulBichl/VibePCB-bench-psu
USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.
206 parts1 - 4 layers105 × 65 mm

FT2D PD20V 12V5 3A 原型板
Accelerator6666/Yaesu-FT2D-USBC-charge
检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。
58 parts - 2 layers92 × 50 mm

Hw1
stanciugabriel/overture-pcb
PCB Design made in KiCad for my automatic syringe pump project
65 parts
Questions
How big is the HotPlate PCB?
It measures 89 × 38 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HotPlate use?
82 parts, built around the STM32F103C8T6, MAX6675ISA+T, TPS54331DR-JSM and AO4485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HotPlate KiCad files?
From the Markuselectronics/DIY-USB-C-Reflow-Hotplate repository on GitHub, at the commit this page was made from: the board is Manufacturing/HotPlate/HotPlate.kicad_pcb and its schematic Manufacturing/HotPlate/HotPlate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HotPlate design in my own project?
Its repository states no licence, so its author keeps all rights: ask Markuselectronics before reusing the design.