Skip to the content

Boards using the ATTINY1614-SSN

60 boards

Boards in 46 GitHub repositories, designed in KiCad, that use the ATTINY1614-SSN by Microchip Technology (-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY1614-SSN’s symbol, footprint and pinout are on its own page.

  • 4 layers67 × 98 mmSJ-201-R6, the printed circuit board in 3D

    SJ-201-R6

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    235 parts113
  • 2 layers23.7 × 25.5 mmMalenki, the printed circuit board in 3D

    Malenki

    MarkR42/malenki-esc

    A small electronic speed controller for e.g. tiny fighting robots or other rc models

    30 parts7
  • 2 layers157.5 × 81.3 mmCollectorPanel, the printed circuit board in 3D

    CollectorPanel

    tjhiker/Personal-MiniBadges-2025

    My Personal MiniBadges used at SAINTCON 2025

    25 parts7
  • 2 layers179.1 × 67.9 mmControl Board, the printed circuit board in 3D

    Control Board

    Alan-JH/PCB-Heater

    Reflow hotplate PCB design

    77 parts6
  • 2 layers41 × 41 mmRid, the printed circuit board in 3D

    Rid

    swr06/LED-Wearable

    LED Wearable that displays patterns, based on ATTiny1614

    12 parts5MIT
  • 2 layers33 × 23.9 mmESPTiny1614, the printed circuit board in 3D

    ESPTiny1614

    tomtor/ESPTiny

    KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards

    24 parts4GPL-3.0
  • 2 layers30.5 × 15.2 mmAvr attiny1614-mini, the printed circuit board in 3D

    Avr attiny1614-mini

    vladbelous/avr-attiny1614-mini

    AVR attiny1614 (tinyAVR 1-series) mini board

    26 parts4
  • 2 layers53.5 × 26.5 mmSB Pixel Count, the printed circuit board in 3D

    SB Pixel Count

    computergeek1507/SB_Pixel_Count

    SB Pixel Counter

    23 parts3
  • 2 layers62.2 × 95.6 mmDiyBMS CurrentVoltage ADS1115, the printed circuit board in 3D

    DiyBMS CurrentVoltage ADS1115

    ff0000wire/diyBMS_CurrentVoltage_ADS1115

    Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614

    51 parts3
  • 2 layers108.2 × 66 mmBattery charger, the printed circuit board in 3D

    Battery charger

    Ben-Fapohunda/Li-ion-battery-charger

    A compact single-cell Li-ion charger powered over USB-C, with a built-in monitor that shows battery voltage and charge current on a small OLED.

    46 parts1
  • 2 layers54.1 × 20.5 mmIRsensormodule, the printed circuit board in 3D

    IRsensormodule

    marnix707/MalenDeMolens

    Sensor om bedrijfstoestand van oude poldermolens te bepalen en door te sturen over het LoRaWAN netwerk.

    21 parts1
  • 2 layers35 × 34.3 mmCnc, the printed circuit board in 3D

    Cnc

    vishnu-c-r/PolyPlot-Firmware

    Custom FluidNC mod for multipen pen plotter with ATC

    17 parts1
  • 4 layers90 × 210 mmPID Board, the printed circuit board in 3D

    PID Board

    AaronDoubert/quadcopter-pid-boards

    Analog PID flight controller for a 5" quadcopter: roll, pitch and yaw loops built from op-amps and trimpots, fed by an MPU-6050 through a small ATtiny/DAC "shim", driving a 4in1 ESC. Designed in KiCad 10.

    228 parts
  • 2 layers63 × 90 mmFallout Badge, the printed circuit board in 3D

    Fallout Badge

    AethelVeritas/Isochron

    A metronome PCB badge for Hackclub's Fallout.

    16 partsMIT
  • 2 layers52 × 44 mmPowerblink, the printed circuit board in 3D

    Powerblink

    annaastrs-svg/PCB-Power-Blink

    pcb of a power bank modulo that charge batterys

    32 parts
  • 2 layers20.3 × 30.5 mmAttiny1614, the printed circuit board in 3D

    Attiny1614

    bassothebasso/tiny1614

    ATTiny1614 Breakout Board

    13 parts
  • 2 layers49.5 × 57.7 mmNightLight, the printed circuit board in 3D

    NightLight

    camerongillingham93/night-light

    49 parts
  • 2 layers65.3 × 50.3 mmNadanna guam, the printed circuit board in 3D

    Nadanna guam

    connorfcruz/nadanna-guam

    An interactive map of Guam displaying culture, history, and mythology

    18 partsMIT
  • 2 layers27.9 × 39.8 mmAttiny arduino serial, the printed circuit board in 3D

    Attiny arduino serial

    gabeak2/ATTINYx14_Arduino

    An arduino-style breakout PCB for the ATTINY-x14 line of chips (specifically designed with the ATTINY1614). Includes USB-Serial converter and USB connector so it is pretty much plug-and-play once you flash megatinycore…

    20 parts
  • 2 layers16.3 × 19.3 mmATtiny1614, the printed circuit board in 3D

    ATtiny1614

    Hyiger-Designs/ATtiny1614

    ATtiny1614 Breakout Board

    17 parts
  • 2 layers16.8 × 20.3 mmATtiny1614 breakout, the printed circuit board in 3D

    ATtiny1614 breakout

    Hyiger-Designs/ATtiny1614_breakout

    ATtiny 1614 Breakout Board

    15 parts
  • 4 layers99.6 × 100 mmDualPreRegPowerSupply, the printed circuit board in 3D

    DualPreRegPowerSupply

    janni0609/2-Channel-PreReg-Powersupply

    A two-channel laboratory bench power supply, 0–36 V / 0–2 A per channel, fully isolated between channels. Each channel pairs a tracking switch-mode pre-regulator with a linear post-regulator, so it has the low output…

    379 parts
  • 2 layers27.9 × 63.5 mmHarvest, the printed circuit board in 3D

    Harvest

    lerouxb/harvest

    A super low power energy-harvesting wifi temperature, humidity and voltage logger plus timelapse camera.

    20 parts
  • 2 layers67.8 × 103.3 mmPilot, the printed circuit board in 3D

    Pilot

    MichalAntkowiak/pilot

    Pilot na podczerwień do telewizora, zaprojektowany od zera w KiCadzie: od policzenia wartości elementów, przez schemat, po samodzielnie poprowadzoną dwuwarstwową płytkę drukowaną.

    15 partsMIT