6 layers95 × 55 mm
2 layers16.3 × 19.3 mm
ATtiny1614
Hyiger-Designs/ATtiny1614ATtiny1614 Breakout Board
- Size
- 16.3 × 19.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 21
- Pads
- 60
- Tracks, vias
- 77, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190605)
- Created
- 31 Jul 2019
- Updated
- 7 Aug 2019
Overview
ATtiny1614 is an open-source printed circuit board by Hyiger-Designs, from the Hyiger-Designs/ATtiny1614 repository on GitHub. It is a 2-layer board of 16.3 × 19.3 mm with 17 parts on 21 nets, routed with 77 tracks and 5 vias.
It is built around the ATTINY1614-SSN, AP7381-33SA and BAT54CW. Its parts include 5 resistors, 3 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY1614-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP7381-33SA
SOT-23-40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT54CW
SOT-323-3-65℃~+125℃ 1 Pair Common Cathode 1V@100mA 200mA 2uA@25V 30V 600mA SOT-323-3 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdATtiny1614
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2, J3 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | AP7381-33SA | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | ATtiny1614-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | BAT54CW | Package_TO_SOT_SMD:SOT-323_SC-70 | D2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Reset | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | UPDI | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J1 |
| 1 | VCC Select | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | JP1 |
Similar boards
- 4 layers24 × 15.8 mm
- 2 layers80.4 × 78.1 mm
- 4 layers47 × 27 mm
SD Swap
Mr-Bossman/SD_Swap
A development tool which swaps an sdcard between a usb3 card reader or a SBC.
44 parts14 - 2 layers46 × 38 mm
- 2 layers88.9 × 50.8 mm
Core16 LB
ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand
130 parts5 - 2 layers40 × 62.8 mm
- 4 layers85.9 × 50 mm
Logic
FallenBuillder/rfid-nfc-manager
This repository consists of schematics, PCB layouts, code and 3D models for a rfid,nfc manager.
136 parts3MIT
Questions
How big is the ATtiny1614 PCB?
It measures 16.3 × 19.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATtiny1614 use?
17 parts, built around the ATTINY1614-SSN, AP7381-33SA and BAT54CW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATtiny1614 KiCad files?
From the Hyiger-Designs/ATtiny1614 repository on GitHub, at the commit this page was made from: the board is attiny1614.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATtiny1614 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hyiger-Designs before reusing the design.