2 layers88.9 × 128.3 mm
Core16 Test Fixture
ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand
20 parts5
2 layers88.9 × 50.8 mm
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand
- Size
- 88.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 126
- Pads
- 477
- Tracks, vias
- 1,188, 183
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 May 2024
- Updated
- 23 Aug 2024
Overview
Core16 LB is an open-source printed circuit board by ageppert, from the ageppert/Core16-Interactive-Core-Memory repository on GitHub. It is a 2-layer board of 88.9 × 50.8 mm with 130 parts on 126 nets, routed with 1,188 tracks and 183 vias.
It is built around the SN74LV1T125DBVR-TP, SI7210-B-00-IV and SI7210-B-03-IV, with the SI7210-B-04-IV, LM393DT and M24C02-WMN6TP among its other parts. Its parts include 49 resistors, 22 diodes, 19 transistors, 18 capacitors and 10 ICs. It belongs with the RP2040 boards of this library.
Main components
12
SN74LV1T125DBVR-TP
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 1uA 2.7ns@5V,15pF 74LV 8mA 8mA Power-off isolation、Output enable、Level shifting Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversSI7210-B-00-IV
SOT-23-5-40℃~+125℃ 1.71V~5.5V 400nA ±20mT SOT-23-5 Linear Hall Sensors ROHSSilicon LabsLinear Hall SensorsSI7210-B-03-IV
SOT-23-5-40℃~+125℃ 1.71V~5.5V 5mA ±0.05%/℃ ±200mT SOT-23-5 Linear Hall Sensors ROHSSilicon LabsLinear Hall SensorsSI7210-B-04-IV
SOT-23-5-40℃~+125℃ 1.71V~5.5V 400nA SOT-23-5 Linear Hall Sensors ROHSSilicon LabsLinear Hall Sensors
LM393DT
SO-8-18V~-1V、1V~18V -55℃~+125℃ 1.3us 1.3us 1mV 2 20nA 2V~36V 36V 3nA 450uA DTL、TTL、CMOS、ECL、MOS SO-8 Comparators ROHSSTMicroelectronicsComparatorsM24C02-WMN6TP
SOIC-8-40℃~+85℃ 2.5V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMSI7210-B-02-IV
SOT-23-5-40℃~+125℃ 1.71V~5.5V 400nA 6mA SOT-23-5 Hall Switches ROHSSilicon LabsHall Switches
SN74HC02DR(LX)
SOP-14Logic GateslingxingicSSP9193-33M5R
SOT-23-5-40℃~+85℃@(Ta) 1 170mV@(200mA) 27uVrms 3.3V 30uA 400mA 5.5V 70dB@(10kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSShanghai Siproin MicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
MMBT4403LT1G
SOT-231 PNP 100nA 200MHz 300 300mW 400mV、750mV 40V 5V 600mA PNP SOT-23 Bipolar (BJT) ROHSRUILONBipolar (BJT)
BAT54AW
SOT-323(SC-70)1 Pair Common Anode 1V@100mA 200mA 2uA@25V 30V SOT-323(SC-70) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdCore-16-Interactive-Core-Memory-Badge
Weave your own 16 bits of core memory over the top of LEDs to interact with directly using a magnetic wand. This project shares the same codebase as Core64.
Purchase: https://www.Core64.io
Follow this project at: https://hackaday.io/project/191834-core16-interactive-core-memory-made-smaller
You are in the hardware development repository. Firmware is at https://github.com/ageppert/Core64/releases
Hardware Version History (latest on top)
v0.2 Logic Board - First production batch
v0.1 Logic Board - Prototype Build
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 470 | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R6, R7, R10, R11, R12, R13, R14, R17, R18, R19, R20, R28, R46 +2 |
| 16 | SK6812 | Core_64_KiCad_Library:4960_ADA_REV_RGB_LED_short_pads | D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36 |
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C16, C17, C19, C20, C21, C22, C23 |
| 8 | MMBT4401LT1G | Package_TO_SOT_SMD:SOT-23-3 | Q2, Q6, Q8, Q10, Q12, Q14, Q18, Q20 |
| 8 | MMBT4403LT1G | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q5, Q7, Q9, Q11, Q13, Q17, Q19 |
| 6 | 220uF | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9, C13, C14, C15 |
| 6 | 6R8-5% | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24, R25, R26 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R27, R36, R37, R38, R44 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R101, R102, R103, R104 |
| 4 | 1K2 | Resistor_SMD:R_0805_2012Metric | R30, R31, R54, R55 |
| 3 | 1K5-1% | Resistor_SMD:R_0805_2012Metric | R47, R50, R53 |
| 3 | 1k2 | Resistor_SMD:R_0805_2012Metric | R41, R42, R43 |
| 3 | BAT54AW | Package_TO_SOT_SMD:SOT-323_SC-70 | D2, D4, D10 |
| 3 | BAT54CW | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D3, D9 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT9, NT11 |
| 2 | 11-1% | Resistor_SMD:R_0805_2012Metric | R49, R52 |
| 2 | 1K8-1% | Resistor_SMD:R_0805_2012Metric | R48, R51 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C10, C12 |
| 2 | 68 | Resistor_SMD:R_0805_2012Metric | R32, R33 |
| 2 | SL3401A | Package_TO_SOT_SMD:SOT-23-3 | Q22, Q23 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | ALT. BATT. | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | CM_CUR_MON | NetTie:NetTie-2_SMD_Pad0.5mm | NT10 |
| 1 | Core_64_Logo | Core_64_KiCad_Library:Core16_w_core_symbol | L1 |
| 1 | Core_64_M-+S_Buttons_4mm | Core_64_KiCad_Library:Core64-M_-_+_S_Buttons | L3 |
| 1 | Core_Memory_4x4_Matrix_Front_Facing | Core_64_KiCad_Library:core_16_6.75mm_square_front_facing | CM1 |
| 1 | GMEM_MON | NetTie:NetTie-2_THT_Pad0.3mm | NT5 |
| 1 | LM393 | Core_64_KiCad_Library:SOIC-8_W3.9mm | U9 |
| 1 | M24C02-RMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NVTR4503NT1G_NMOS_GSD | Package_TO_SOT_SMD:SOT-23-3 | Q21 |
| 1 | PICO | Core_64_KiCad_Library:Pico_SC0915_THRUHOLE_CUTOUTS | U1 |
| 1 | QWIIC | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | X9 |
| 1 | SAO_conn_SFH11-NBPC-D03-ST-BK | Core_64_KiCad_Library:Badgelife-SAOv169-BADGE-2x3 | X8 |
| 1 | SI7210-B-00-IV | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | SI7210-B-02-IV | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | SI7210-B-03-IV | Package_TO_SOT_SMD:SOT-23-5 | U13 |
| 1 | SI7210-B-04-IV | Package_TO_SOT_SMD:SOT-23-5 | U14 |
| 1 | SK12D07L4B | Switch_XKB_SK12D07VG4_SK12D07L4B:SK12D07VG4 | SW1 |
| 1 | SN74HC02DR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U10 |
| 1 | SN74LV1T125DBVR | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | SSP9193-33M5R | Package_TO_SOT_SMD:SOT-23-5 | U7 |
More from ageppert/Core16-Interactive-Core-Memory
1Similar boards
- 2 layers85 × 170 mm
Core64 LB
ageppert/Core-64-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.
198 parts17GPL-3.0 - 2 layers50.8 × 63.5 mm
- 2 layers85 × 85 mm
Core64c LB
ageppert/Core-64c-Compact-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.
162 parts1GPL-3.0 - 2 layers88.9 × 50.8 mm
BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers38.1 × 50.8 mm
SAO Demo Controller
ageppert/SAO_Demo_Controller
A small inline SAO with an RP2040 used to demo SAOs that require smarts, but don't have it built-in.
59 parts3 - 2 layers82.5 × 85.3 mm
- 2 layers38 × 43 mm
Esp32-powerswitcher
matthieuvigne/MiAM_robotics
Generic repo for robotic projects with the former MiAM Eurobot team !
55 parts5GPL-3.0 - 4 layers32 × 60 mm
Questions
How big is the Core16 LB PCB?
It measures 88.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Core16 LB use?
130 parts, built around the SN74LV1T125DBVR-TP, SI7210-B-00-IV, SI7210-B-03-IV and SI7210-B-04-IV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Core16 LB KiCad files?
From the ageppert/Core16-Interactive-Core-Memory repository on GitHub, at the commit this page was made from: the board is Electronic Design/Core16_LB_V0.1 Design Files KiCAD 7/Core16_LB.kicad_pcb and its schematic Electronic Design/Core16_LB_V0.1 Design Files KiCAD 7/Core16_LB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Core16 LB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ageppert before reusing the design.