Skip to the content
2 layers82.5 × 85.3 mmBSPD-27, the printed circuit board in 3D

BSPD for the fbr27 car

Size
82.5 × 85.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
108
Nets
72
Pads
344
Tracks, vias
737, 105
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Oct 2026
Updated
11 Oct 2026

Overview

BSPD-27 is an open-source printed circuit board by Full-Blue-Racing, from the Full-Blue-Racing/BSPD-27 repository on GitHub. It is a 2-layer board of 82.5 × 85.3 mm with 108 parts on 72 nets, routed with 737 tracks and 105 vias.

It is built around the R-78E5.0-1.0, SN74HC00DR(LX) and SN74HC02DR(LX), with the LM2901DR, ULN2003ADRG and CC0805KRX7R9BB104 among its other parts. Its parts include 38 resistors, 16 capacitors, 13 diodes, 5 ICs and 5 transistors.

Main components

12

Parts

108
QtyValueFootprintReferences
1210kResistor_SMD:R_0805_2012MetricR2, R3, R5, R8, R9, R14, R18, R19, R26, R36, R37, R38
100.1uCapacitor_SMD:C_0805_2012MetricC2, C4, C7, C8, C9, C10, C12, C14, C15, C16
101kResistor_SMD:R_1206_3216MetricR4, R10, R22, R23, R24, R28, R29, R33, R34, R35
7100kResistor_SMD:R_1206_3216MetricR6, R11, R12, R13, R17, R25, R27
547kResistor_SMD:R_0805_2012MetricR1, R7, R15, R20, R21
4MMFTN3404A-AQPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q5
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH5, H6, H7, H8
3100u 25VCapacitor_SMD:CP_Elec_6.3x7.7C1, C3, C6
310uCapacitor_SMD:C_0805_2012MetricC5, C11, C13
3MCP6547-I_PPackage_SO:MSOP-8_3x3mm_P0.65mmCOMP1, COMP2, COMP3
23296W-1-xxxLFPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR3, VR4
23314GPotentiometer_SMD:Potentiometer_Bourns_3314G_VerticalVR5, VR6
25.1kResistor_SMD:R_1206_3216MetricR30, R32
1+12VTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP8
11MResistor_SMD:R_1206_3216MetricR16
11N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD12
11N5822Diode_THT:D_DO-201AD_P12.70mm_HorizontalD2
130R110Fuse:Fuse_1812_4532MetricF1
174HC00Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
174HC02Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU5
191kResistor_SMD:R_1206_3216MetricR31
1BRK_INTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP1
1Brk_ENLED_SMD:LED_1206_3216MetricD15
1Brk_PluggedLED_SMD:LED_1206_3216MetricD16
1Brk_Thresh+TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP11
1Brk_Thresh+Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR1
1Brk_Thresh-Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR7
1Brk_Thresh-TestPoint:TestPoint_Pad_D2.0mmTP7
1Conn_01x14FBR_Footprints:TE_776267-1J1
1FerriteBeadInductor_SMD:L_1206_3216MetricFB1
1GNDTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP6
1GRNLED_SMD:LED_1206_3216MetricD9
1LM2901Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU4
1MC74HC08ADR2G-QPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmIC1
1MCCMA51-S-DC12V-CFBR_Footprints:MCCMA51-S-DC12V-CK1
1MMFTP3401-AQPackage_TO_SOT_SMD:SOT-23Q4
1P6SMB18ADiode_SMD:D_SMBD1
1PWRLED_SMD:LED_1206_3216MetricD11
1R-78E5.0-1.0Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THTPS1
1RC_T05TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP3
1RC_T10TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP4
1R_onTestPoint:TestPoint_Pad_D2.0mmTP9
1R_onLED_SMD:LED_1206_3216MetricD19
1RedLED_SMD:LED_1206_3216MetricD10
1SEN_ImplausLED_SMD:LED_1206_3216MetricD17
1SEN_UnpluggedLED_SMD:LED_1206_3216MetricD18
1THR_INTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP2
1Thr_ENLED_SMD:LED_1206_3216MetricD13
1Thr_PluggedLED_SMD:LED_1206_3216MetricD14
1Thr_Thresh+Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR2
1Thr_Thresh+TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP5
1Thr_Thresh-Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR8
1Thr_Thresh-TestPoint:TestPoint_Pad_D2.0mmTP10
1ULN2003APackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU3

Similar boards

  • 2 layers90 × 60 mmValvenode master, the printed circuit board in 3D

    Valvenode master

    vinthewrench/valvenode

    Wired RS-485 field-bus irrigation valve controller for Raspberry Pi farm automation

    54 parts15
  • 2 layers148.6 × 83.8 mmNew BSPD, the printed circuit board in 3D

    New BSPD

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    62 parts
  • 4 layers86 × 86 mmBMS, the printed circuit board in 3D

    BMS

    vadymtaranenko/ESP32-3S-BMS

    Prosty, niezawodny system zarządzania pakietami Li-Po 3S oparty na mikrokontrolerze ESP32. Układ komunikuje się po magistrali SPI.

    122 parts
  • 2 layers117 × 78 mmPanel, the printed circuit board in 3D

    Panel

    roman-khvatov/RoboWay

    Кружок робототехники RoboWay

    42 parts1MIT
  • 4 layers141 × 93 mmDevkyt, the printed circuit board in 3D

    Devkyt

    Lattrex/devkyt

    Development board for the Kyttar KYT16A120 chip

    26 parts
  • 2 layers100 × 96 mmBacklight, the printed circuit board in 3D

    Backlight

    jackw01/scanlight

    A better light source for scanning color negative film

    69 parts397CERN-OHL-W-2.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 2 layers50.8 × 63.5 mmSAO Core4, the printed circuit board in 3D

    SAO Core4

    ageppert/SAO_CORE4

    A Nibble of Core Memory

    92 parts20

Questions

How big is the BSPD-27 PCB?

It measures 82.5 × 85.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BSPD-27 use?

108 parts, built around the R-78E5.0-1.0, SN74HC00DR(LX), SN74HC02DR(LX) and LM2901DR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BSPD-27 KiCad files?

From the Full-Blue-Racing/BSPD-27 repository on GitHub, at the commit this page was made from: the board is BSPD-27.kicad_pcb and its schematic BSPD-27.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BSPD-27 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Full-Blue-Racing before reusing the design.