

NightLight
- Size
- 49.5 × 57.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 35
- Pads
- 123
- Tracks, vias
- 148, 173
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Feb 2025
- Updated
- 10 Aug 2025
Overview
NightLight is an open-source printed circuit board by camerongillingham93, from the camerongillingham93/night-light repository on GitHub. It is a 2-layer board of 49.5 × 57.7 mm with 49 parts on 35 nets, routed with 148 tracks and 173 vias.
It is built around the ATTINY1614-SSN, PAM2401SCADJ and AO3401A, with the AO3400A, BAT54C and IN-S124ARUW among its other parts. Its parts include 16 resistors, 10 ICs, 7 capacitors, 6 connectors and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY1614-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PAM2401SCADJ
MSOP-8-40℃~+85℃ 1 150uA 1A 1MHz 2.5V~5V 900mV~4.75V Adjustable Boost Boost Built-in Yes MSOP-8 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesIN-S124ARUW
SMD,3.2x1.2mm-40℃~+85℃ 140mcd 140° 20mA 3.3V 78mW Discrete Diode Water Clear White SMD,3.2x1.2mm LED Indication - Discrete ROHSInoluxLED Indication - Discrete
README
README.mdFirefly Night-Light
February, 13, 2025
- Development REPO for a nightlight project using the AT-TINY1614 MCU and addressable LED strips
Features
- PCB is designed to replace a standard wide-mouth Mason jar and have LED strips hanging from it resembling a jar full of fireflies
- Top copper pad acts as a touch button to toggle the nightlight on/off and adjust brightness. Shake the jar for a firefly lightshow
- Onboard LI-PO battery that is USB-C re-chargeable
Rendering of Top of the night-light PCB
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | ~ | myFootprintDesigns:fireflyTouchNB | U1, U2, U3, U4, U5, U6, U7 |
| 5 | 1M | Resistor_SMD:R_0805_2012Metric | R2, R3, R11, R12, R14 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C6 |
| 3 | Conn_01x03 | myFootprintDesigns:fairy_conn | J4, J5, J6 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C7 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 750K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny1614-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | BAT54C | BAT54C:SOT23-R | D1 |
| 1 | Battery_Cell | myFootprintDesigns:14500 Holder | BT1 |
| 1 | Conn_01x03 | myFootprintDesigns:spares_1*3 | J3 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1 |
| 1 | IN-S124ARUW | KiCad-SMTLED:INS124ARUW | LED1 |
| 1 | MCP73123T-22SI_MF | MCP73123T-22SI_MF:SON50P300X300X100-11N-D | IC2 |
| 1 | PAM2401SCADJ | PAM2401:SOP65P490X110-8N | IC1 |
| 1 | SRN2510BTA-2R2M | SRN2510BTA-2R2M:SRN2510BTA2R2M | L1 |
| 1 | TILT | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical_SMD | SW1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | myFootprintDesigns:USB-C_PWR | J1 |
| 1 | ~ | myFootprintDesigns:fireflyTouch | B1 |
More from camerongillingham93/night-light
2- 2 layers49.5 × 57.7 mm

- 2 layers49.5 × 45.2 mm

Similar boards
- 2 layers150 × 79.8 mm

- 4 layers152.4 × 63.5 mm

- 4 layers246.5 × 95 mm

Viaggio
dataehora/beatconfused
A small web studio of fast, elegant, install-free music tools. Every tool is plain HTML, CSS and vanilla JavaScript with the Web Audio API — no build step, no dependencies, no accounts, works offline after first load.
215 parts1 - 4 layers70.4 × 107.2 mm

- 4 layers39.1 × 94.5 mm

- 4 layers158 × 68 mm

DronePCB
nickzentmayer/EE300W-R6Drone
Repository containing all code and CAD design files for EE300W project SP26
167 parts - 2 layers89 × 55.5 mm

Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0 - 2 layers89 × 55.5 mm

Mintypcb
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
158 parts1
Questions
How big is the NightLight PCB?
It measures 49.5 × 57.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NightLight use?
49 parts, built around the ATTINY1614-SSN, PAM2401SCADJ, AO3401A and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NightLight KiCad files?
From the camerongillingham93/night-light repository on GitHub, at the commit this page was made from: the board is hardware/board-files/nightLight-r3/nightLight.kicad_pcb and its schematic hardware/board-files/nightLight-r1/nightLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NightLight design in my own project?
Its repository states no licence, so its author keeps all rights: ask camerongillingham93 before reusing the design.