4 layers67 × 98 mm
SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113
2 layers16.8 × 20.3 mm
ATtiny1614 breakout
Hyiger-Designs/ATtiny1614_breakoutATtiny 1614 Breakout Board
- Size
- 16.8 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 19
- Pads
- 56
- Tracks, vias
- 103, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Sep 2019
- Updated
- 4 Feb 2020
Overview
ATtiny1614 breakout is an open-source printed circuit board by Hyiger-Designs, from the Hyiger-Designs/ATtiny1614_breakout repository on GitHub. It is a 2-layer board of 16.8 × 20.3 mm with 15 parts on 19 nets, routed with 103 tracks and 33 vias.
It is built around the ATTINY1614-SSN. Its parts include 5 resistors, 3 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdATtiny1614_breakout
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | ATtiny1614-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LP2985 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Reset | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | UPDI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
Similar boards
- 2 layers23.7 × 25.5 mm
Malenki
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
30 parts7 - 2 layers157.5 × 81.3 mm
- 2 layers179.1 × 67.9 mm
- 2 layers41 × 41 mm
- 2 layers33 × 23.9 mm
ESPTiny1614
tomtor/ESPTiny
KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards
24 parts4GPL-3.0 - 2 layers30.5 × 15.2 mm
Avr attiny1614-mini
vladbelous/avr-attiny1614-mini
AVR attiny1614 (tinyAVR 1-series) mini board
26 parts4 - 2 layers53.5 × 26.5 mm
Questions
How big is the ATtiny1614 breakout PCB?
It measures 16.8 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATtiny1614 breakout use?
15 parts, built around the ATTINY1614-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATtiny1614 breakout KiCad files?
From the Hyiger-Designs/ATtiny1614_breakout repository on GitHub, at the commit this page was made from: the board is attiny1614_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATtiny1614 breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hyiger-Designs before reusing the design.