

Fallout Badge
A metronome PCB badge for Hackclub's Fallout.
- Size
- 63 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 17
- Pads
- 33
- Tracks, vias
- 115, 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jul 2026
- Updated
- 2 Jul 2026
Overview
Fallout Badge is an open-source printed circuit board by AethelVeritas, from the AethelVeritas/Isochron repository on GitHub, published under the MIT licence. It is a 2-layer board of 63 × 90 mm with 16 parts on 17 nets, routed with 115 tracks and 2 vias.
It is built around the ATTINY1614-SSN, CR2032-BS-6-1 and PKLCS1212E4001-R1. Its parts include 2 resistors, 1 IC and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY1614-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CR2032-BS-6-1
-Battery base CR2032 Phosphor bronze - ROHSQ&JButton And Strip Battery ConnectorPKLCS1212E4001-R1
SMD,12x12mm-20℃~+70℃ 12mm 12mm 3mm 4kHz 84dB Passive (Externally Driven) Piezoelectric ±12.5V SMD,12x12mm Buzzers ROHSMurataBuzzers
README
README.mdIsochron
A PCB badge that has a piezo buzzer and an OLED, making it usable as a metronome! It also has two capacitive touch buttons, with one upping the BPM and the other generating a random BPM. "Isochron" is derived from "isochronos", meaning "equal time" in Greek.
Pictures
BOM
| Part Name | Quantity | Part Price | Link |
|---|---|---|---|
| CR2032-BS-6-1 (Battery Holder) | 1 | $0.1380 | https://www.lcsc.com/product-detail/C70377.html |
| ATTINY1614-SSN (Microcontroller) | 1 | $2.5972 | https://www.lcsc.com/product-detail/C614832.html |
| PKLCS1212E4001-R1 (Buzzer) | 1 | $1.3338 | https://www.lcsc.com/product-detail/C113159.html |
| B3U-1000P (Tactile Switch) | 1 | $0.1783 | https://www.lcsc.com/product-detail/C231329.html |
| 128x64 OLED | 1 | $2 | Owned |
| 0603 100 oHm resistor | 2 | ? | Electronics market |
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | GND, GND, SDA, SLA, UDPI, VDD, VDD |
| 2 | 47 | Capacitor_SMD:C_0603_1608Metric | R1, R2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | Touch_1, TP9 |
| 1 | ATTINY1614-SSN_C614832 | JLC/LCSC:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | CR2032-BS-6-1 | JLC/LCSC:BAT-TH_CR2032-BS-6-1 | B1 |
| 1 | LOGO | JLC/LCSC:silk3 | G*** |
| 1 | PKLCS1212E4001-R1 | JLC/LCSC:BUZ-SMD_2P-L12.0-W12.0-L_PKLCS1212E4001-R1 | BUZZER |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
Similar boards
- 2 layers100 × 100 mm

- 4 layers44 × 33.5 mm

Telinksensor hw
WojtaCZ/telinksensor-hw
HW repository for TLSR8258 based temperature, humidity and pressure sensor
79 parts2 - 4 layers40 × 60 mm

TMDT1UC1
GrimGT/Meridian
Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots
35 parts1 - 4 layers63.3 × 89.1 mm

HCF Badge
NullByteZero/HCF2025-badge
A repo with both hardware and software files for HCF CTF badge 2025.
16 parts1 - 4 layers150.6 × 89.9 mm

AdvDash 5 inch
ADVecu/ADV.dash
ADV.dash is a dashboard project built with LVGL and ESP32-S3. It is prepared to receive CAN bus data from rusEFI and, in the future, other programmable ECUs.
190 parts - 4 layers79.9 × 84.7 mm

- 2 layers51.8 × 18 mm

Esp now portable sender
CommanderRedYT/esp-now-portable-sender
A small PCB with a ESP-32 and a button cell to send ESP-Now messages
8 partsGPL-3.0 - 2 layers42 × 54 mm

Click counter Q5
dudgeon/count-fidget
A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.
96 parts
Questions
How big is the Fallout Badge PCB?
It measures 63 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fallout Badge use?
16 parts, built around the ATTINY1614-SSN, CR2032-BS-6-1 and PKLCS1212E4001-R1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fallout Badge KiCad files?
From the AethelVeritas/Isochron repository on GitHub, at the commit this page was made from: the board is PCB/Fallout_Badge.kicad_pcb and its schematic PCB/Fallout_Badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fallout Badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).