

Esp now portable sender
A small PCB with a ESP-32 and a button cell to send ESP-Now messages
- Size
- 51.8 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 32
- Pads
- 79
- Tracks, vias
- 62, 58
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Dec 2023
- Updated
- 3 Dec 2023
Overview
Esp now portable sender is an open-source printed circuit board by CommanderRedYT, from the CommanderRedYT/esp-now-portable-sender repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.8 × 18 mm with 8 parts on 32 nets, routed with 62 tracks and 58 vias.
It is built around the ESP32-C3-MINI-1 and CR2032-BS-6-1. Its parts include 2 capacitors, 2 resistors, 2 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2README
README.mdesp-now-portable-sender
A small PCB with a ESP-32 and a button cell to send ESP-Now messages
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | CR2032-BS-6-1 | battery-holder:BAT-TH_CR2032-BS-6-1 | B1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3-MINI-1 | PCM_Espressif:ESP32-C3-MINI-1 | U1 |
Similar boards
- 2 layers100 × 100 mm

- 4 layers44 × 33.5 mm

Telinksensor hw
WojtaCZ/telinksensor-hw
HW repository for TLSR8258 based temperature, humidity and pressure sensor
79 parts2 - 4 layers40 × 60 mm

TMDT1UC1
GrimGT/Meridian
Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots
35 parts1 - 4 layers63.3 × 89.1 mm

HCF Badge
NullByteZero/HCF2025-badge
A repo with both hardware and software files for HCF CTF badge 2025.
16 parts1 - 4 layers150.6 × 89.9 mm

AdvDash 5 inch
ADVecu/ADV.dash
ADV.dash is a dashboard project built with LVGL and ESP32-S3. It is prepared to receive CAN bus data from rusEFI and, in the future, other programmable ECUs.
190 parts - 2 layers63 × 90 mm

- 4 layers79.9 × 84.7 mm

- 2 layers42 × 54 mm

Click counter Q5
dudgeon/count-fidget
A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.
96 parts
Questions
How big is the Esp now portable sender PCB?
It measures 51.8 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp now portable sender use?
8 parts, built around the ESP32-C3-MINI-1 and CR2032-BS-6-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp now portable sender KiCad files?
From the CommanderRedYT/esp-now-portable-sender repository on GitHub, at the commit this page was made from: the board is hardware/esp-now-portable-sender.kicad_pcb and its schematic hardware/esp-now-portable-sender.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp now portable sender design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).