4 layers67 × 98 mm
SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113
2 layers27.9 × 39.8 mm
Attiny arduino serial
gabeak2/ATTINYx14_ArduinoAn arduino-style breakout PCB for the ATTINY-x14 line of chips (specifically designed with the ATTINY1614). Includes USB-Serial converter and USB connector so it is pretty much plug-and-play once you flash megatinycore onto it.
- Size
- 27.9 × 39.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 25
- Pads
- 94
- Tracks, vias
- 175, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Sep 2023
- Updated
- 7 Sep 2023
Overview
Attiny arduino serial is an open-source printed circuit board by gabeak2, from the gabeak2/ATTINYx14_Arduino repository on GitHub. It is a 2-layer board of 27.9 × 39.8 mm with 20 parts on 25 nets, routed with 175 tracks and 57 vias.
It is built around the ATTINY1614-SSN and CH340G. Its parts include 7 capacitors, 4 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY1614-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 16KB 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
README
README.mdATTINYx14_Arduino
An arduino-style breakout PCB for the ATTINY-x14 line of chips (specifically designed with the ATTINY1614). Includes USB-Serial converter and USB connector so it is pretty much plug-and-play once you flash megatinycore onto it.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J3, J4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | ATtiny1614-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | D_Small | Diode_SMD:D_SOD-123 | D1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers23.7 × 25.5 mm
Malenki
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
30 parts7 - 2 layers157.5 × 81.3 mm
- 2 layers179.1 × 67.9 mm
- 2 layers41 × 41 mm
- 2 layers33 × 23.9 mm
ESPTiny1614
tomtor/ESPTiny
KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards
24 parts4GPL-3.0 - 2 layers30.5 × 15.2 mm
Avr attiny1614-mini
vladbelous/avr-attiny1614-mini
AVR attiny1614 (tinyAVR 1-series) mini board
26 parts4 - 2 layers53.5 × 26.5 mm
Questions
How big is the Attiny arduino serial PCB?
It measures 27.9 × 39.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Attiny arduino serial use?
20 parts, built around the ATTINY1614-SSN and CH340G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Attiny arduino serial KiCad files?
From the gabeak2/ATTINYx14_Arduino repository on GitHub, at the commit this page was made from: the board is attiny_arduino_serial.kicad_pcb and its schematic attiny_arduino_serial.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Attiny arduino serial design in my own project?
Its repository states no licence, so its author keeps all rights: ask gabeak2 before reusing the design.