
Boards using the BZT52C15
37 boardsBoards in 30 GitHub repositories, designed in KiCad, that use the BZT52C15 by Diodes Incorporated (-65℃~+150℃ 1 Independent 100nA@1V 13.8V~15.6V 15V 200Ω 30Ω 370mW SOD-123 Zener Diodes ROHS). See how each wires it, with its parts, size, README and files; the BZT52C15’s symbol, footprint and pinout are on its own page.
- 2 layers200 × 120 mm

- 4 layers188.1 × 79 mm

- 6 layers46.5 × 47.2 mm

NAVCORE SoOP
kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
217 parts2MIT - 2 layers45 × 80 mm

Bridge
lachlanhurst/dukki
Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.
72 parts2MIT - 6 layers268 × 230 mm

Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0 - 4 layers81 × 90.3 mm

Mildly Overkill
hackepeter101/Mildly-Overkill
todo.md was written entirely by AI. It's the list of everything it found. I read the suggestions, double-check them, and then fix them myself in KiCad, usually while muttering.
138 parts1 - 4 layers100 × 60 mm

Transistor hfe measurement circuit
mjm-12/transistor-hfe-measurement-circuit
Transistor hFE measurement circuit (KiCad, CERN-OHL-P-2.0)
96 parts1CERN-OHL-P-2.0 - 2 layers162 × 40 mm

Nano supply v2b
xx0x/nano-supply
Compact open source Eurorack USB-C power supply.
54 parts1CERN-OHL-P-2.0 - 4 layers164.9 × 102 mm

Carrier
AJXD2/carplay-project
One board that turns the Pi 4 + 7" screen into a complete car radio replacement. It bolts onto the Pi like a HAT, plugs into the truck's radio harness, and does everything the factory radio did plus what the Pi needs:
171 parts - 6 layers37 × 37 mm

Fc f405 2026-10-16 1025
ara-mkr/f405-flight-controller
This is a flight controller I designed as a side project. It was fun and pretty challenging, and I'm planning to build a drone with it at some point!
122 partsCERN-OHL-P-2.0 - 4 layers54 × 54 mm

Smartknob driver
aryanthomare/SmartKnob
A programmable force-feedback knob for your computer. Custom motor-driver PCB, closed-loop haptic firmware, a native Windows companion app and a parametric 3D-printed enclosure, all designed in house.
69 parts - 4 layers65 × 56 mm

Canary pwr
danbrunski/canary
Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.
132 parts - 2 layers102.9 × 99.1 mm

- 2 layers99.1 × 89.8 mm

- 4 layers93 × 62 mm

- 4 layers86 × 90 mm

Sc02 drive
KVR-CIBER/sc02-solar-hypercar
SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie
94 parts - 2 layers91 × 65 mm

- 4 layers200 × 150 mm

HifiAmp TPA3255
nevenfo/tpA3255-hifi-amplifier
Open-source Hi-Fi stereo amplifier based on TPA3255 + OPA1612, designed in KiCad with an AI-assisted MCP workflow.
126 parts - 6 layers75 × 75 mm

Ossm flagship
openvalence/Hardware
The OSSM Flagship PCB (ESP32-P4 + ESP32-C6) and everything physical around it. KiCad, CERN-OHL-S.
298 partsCERN-OHL-S-2.0 - 2 layers141.8 × 50 mm

Cwl
philipparndt/opentherm-wolf-cwl
Decoder tool for analyzing OpenTherm protocol communication between a BM remote control and a Wolf CWL ventilation/heat-recovery unit. Built to reverse-engineer the protocol for building a custom ESP32-based controller.
63 parts - 2 layers100 × 100 mm

AquaPCB
schwabix-1311/aquaPCB
Open-hardware Raspberry Pi base board for aquaPi software. 12 V supply; six 5 A MOSFET outputs for LED lamps and fans (2 with hardware PWM); 4 SSR/relay drivers; protected inputs; 1-Wire; ADS1115 with a pH amplifier on…
158 partsCERN-OHL-S-2.0 - 2 layers174.2 × 115 mm

12-Channel Ejection Controller
sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.
300 partsApache-2.0 - 4 layers150 × 155 mm

Usb console server
TheKingOfChaos/Console-Server
48 RS-232 console ports on one Raspberry Pi: three identical boards, 16 ports each. Built from the design record of 2026-10-10. KiCad 10.0.7. This is Rev B (git tag rev-A is the first board).
361 parts - 4 layers135.2 × 46.8 mm

Gd power supply board pcb
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
161 parts33MIT