Skip to the content
12

BZT52C15

Diodes IncorporatedExtended

-65℃~+150℃ 1 Independent 100nA@1V 13.8V~15.6V 15V 200Ω 30Ω 370mW SOD-123 Zener Diodes ROHS

Part id
diodes/BZT52C15
Category
Zener Diodes
Package
SOD-123
Pins
5
In stock
52,710 at JLCPCB (C177014)
Used on
37 open-source boards

Overview

The BZT52C15 is a zener Diode made by Diodes Incorporated in a SOD-123 package with 2 pins. -65℃~+150℃ 1 Independent 100nA@1V 13.8V~15.6V 15V 200Ω 30Ω 370mW SOD-123 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 52,710 are in stock at JLCPCB (part C177014). 37 open-source boards in 30 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

From the datasheet

3
Forward voltage
900 mV · max forward voltage at IF = 10 mA · p. 2
Junction to air (SOD123)
338 K/W · junction to ambient air, FR-4 PCB with 1 inch copper pad layout · p. 2
Junction, hottest
150 °C · max operating junction temperature · p. 2

What it is and has

7
Construction
Planar die · p. 1
Power dissipation
500mW · p. 1
Package
SOD123 · p. 1
Qualification
AEC-Q101 · p. 1
Polarity marking
Cathode band · p. 1
Nominal Zener voltage
15 V at 5 mA · p. 2
Marking code
WJ · p. 2

Specifications

11
ParameterConditionsAs printedPage
Forward Voltage VFIF = 10mA; TA = +25°Cmax 0.9 V2
Power Dissipation PDNote 7; TL = +75°Cmax 500 mW2
Power Dissipation PDNote 8; TA = +25°C; device mounted on FR-4 PCB with 1 inch copper pad layoutmax 370 mW2
Thermal Resistance, Junction to Ambient Air RθJASOD123; Note 8; device mounted on FR-4 PCB with 1 inch copper pad layoutmax 338 °C/W2
Thermal Resistance, Junction to Lead RθJLSOD123; Note 9; measurement obtained via infrared scan methodmax 150 °C/W2
Operating and Storage Temperature Range TJ, TSTGmin -65 · max 150 °C2
Zener Voltage Range VZBZT52C15; IZT = 5 mA; TA = +25°C; nominal voltage 15 V; Note 10min 13.8 · max 15.6 V2
Maximum Zener Impedance ZZTBZT52C15; IZT = 5 mA; f = 1kHz; TA = +25°Cmax 30 Ω2
Maximum Zener Impedance ZZKBZT52C15; IZK = 1.0 mA; f = 1kHz; TA = +25°Cmax 200 Ω2
Maximum Reverse Current IRBZT52C15; VR = 10.5 V; TA = +25°C; Note 10max 0.1 uA2
Temperature CoefficientBZT52C15; IZTC = 5 mA; TA = +25°Cmin 9.2 · max 13 mV/C2

Open-source boards using it

37See all 37
  • 2 layers200 × 120 mmPlytka v2, the printed circuit board in 3D

    Plytka v2

    tmierzwa/WICI

    Otwarty system łączności awaryjnej (Reticulum/LXMF, 869 MHz)

    152 parts4
  • 4 layers188.1 × 79 mmJacobi, the printed circuit board in 3D

    Jacobi

    Tecnologic/unimoc_jacobi

    48V at 50A with optimised colling

    248 parts3GPL-3.0
  • 6 layers46.5 × 47.2 mmNAVCORE SoOP, the printed circuit board in 3D

    NAVCORE SoOP

    kfilipekk/iridium_drone

    STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler

    217 parts2MIT
  • 2 layers45 × 80 mmBridge, the printed circuit board in 3D

    Bridge

    lachlanhurst/dukki

    Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.

    72 parts2MIT
  • 6 layers268 × 230 mmRf board, the printed circuit board in 3D

    Rf board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    357 parts2CERN-OHL-S-2.0
  • 4 layers81 × 90.3 mmMildly Overkill, the printed circuit board in 3D

    Mildly Overkill

    hackepeter101/Mildly-Overkill

    todo.md was written entirely by AI. It's the list of everything it found. I read the suggestions, double-check them, and then fix them myself in KiCad, usually while muttering.

    138 parts1
  • 4 layers100 × 60 mmTransistor hfe measurement circuit, the printed circuit board in 3D

    Transistor hfe measurement circuit

    mjm-12/transistor-hfe-measurement-circuit

    Transistor hFE measurement circuit (KiCad, CERN-OHL-P-2.0)

    96 parts1CERN-OHL-P-2.0
  • 2 layers162 × 40 mmNano supply v2b, the printed circuit board in 3D

    Nano supply v2b

    xx0x/nano-supply

    Compact open source Eurorack USB-C power supply.

    54 parts1CERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BZT52C15?

Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BZT52C15?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the BZT52C15 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the BZT52C15?

JLCPCB lists it as part C177014, with 52,710 in stock; the sellers' links on this page open their listings.

What can replace the BZT52C15?

Parts like it in the library: the BZT52C15 by GOODWORK, the BZT52C15 by MDD, the BZT52C15 by Jiangsu Changjing Electronics Technology (CJ) and the BZT52B15 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BZT52C15?

37 boards in 30 repositories on GitHub; the most starred are listed on this page, with their KiCad files.