Skip to the content
12

MMSZ5245B

onsemiExtended

-55℃~+150℃ 1 Independent 100nA@11V 14.25V~15.75V 15V 16Ω 500mW 600Ω SOD-123 Zener Diodes ROHS

Part id
onsemi/MMSZ5245B
Category
Zener Diodes
Package
SOD-123
Pins
2
In stock
64,500 at JLCPCB (C129730)
Used on
5 open-source boards

Overview

The MMSZ5245B is a zener Diode made by onsemi in a SOD-123 package with 2 pins. -55℃~+150℃ 1 Independent 100nA@11V 14.25V~15.75V 15V 16Ω 500mW 600Ω SOD-123 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 64,500 are in stock at JLCPCB (part C129730). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

From the datasheet

3
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 1
Junction to air (SOD−123)
340 K/W · junction to ambient, max · p. 1
Forward voltage
900 mV · at IF = 10 mA, TA = 25°C, max · p. 3

Pinout

2
The pins of the MMSZ5245B
PinNameType
1KPassive
2APassive

Open-source boards using it

5
  • 2 layers135 × 80 mmSpin Coater, the printed circuit board in 3D

    Spin Coater

    hacker-fab/uw-spincoater

    UW Spincoater implementation, started Fall 2025

    100 parts2
  • 4 layers100 × 60 mmTransistor hfe measurement circuit, the printed circuit board in 3D

    Transistor hfe measurement circuit

    mjm-12/transistor-hfe-measurement-circuit

    Transistor hFE measurement circuit (KiCad, CERN-OHL-P-2.0)

    96 parts1CERN-OHL-P-2.0
  • 2 layers88 × 130 mmWindowmaster controller v2, the printed circuit board in 3D

    Windowmaster controller v2

    Simplycissmus/windowmaster-s3-controller

    Open hardware and ESP32-S3 firmware for a local 24 V window actuator controller with MQTT and Home Assistant integration.

    68 parts1
  • 4 layers60 × 102 mmAnthracite top, the printed circuit board in 3D

    Anthracite top

    trope-oshw/anthracite

    MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)

    222 parts5CERN-OHL-S-2.0
  • 2 layers150 × 110 mmBLDC Proto, the printed circuit board in 3D

    BLDC Proto

    hacker-fab/uw-spincoater

    UW Spincoater implementation, started Fall 2025

    61 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MMSZ5245B?

Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMSZ5245B?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the MMSZ5245B datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MMSZ5245B?

JLCPCB lists it as part C129730, with 64,500 in stock; the sellers' links on this page open their listings.

What can replace the MMSZ5245B?

Parts like it in the library: the BZT52C15 by MDD, the BZT52C15Q by JSMSEMI, the BZT52C15 by Shikues and the MMSZ15 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMSZ5245B?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.