

Spin Coater
UW Spincoater implementation, started Fall 2025
- Size
- 135 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 92
- Pads
- 416
- Tracks, vias
- 394, 341
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Feb 2026
- Updated
- 26 May 2026
Overview
Spin Coater is an open-source printed circuit board by hacker-fab, from the hacker-fab/uw-spincoater repository on GitHub. It is a 2-layer board of 135 × 80 mm with 100 parts on 92 nets, routed with 394 tracks and 341 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP62200TWU and DRV8300DPW, with the LM5157RTE, MMSZ5245B and B340AXF among its other parts. Its parts include 36 capacitors, 22 resistors, 11 diodes, 7 transistors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
8ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP62200TWU
TSOT-26-40℃~+125℃ 1 135uA 2A 4.2V~18V 750kHz 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersDRV8300DPW
TSSOP-20-40℃~+125℃ 1.5A 3 5V~20V 750mA、1.5A 800uA Three Phase TSSOP-20 Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsBrushless DC (BLDC) Motor DriverLM5157RTE
WQFN-16(3x3)-40℃~+125℃@(TJ) 1 1.5V~45V 1.5V~48V 2.2MHz 6.5A 670uA Adjustable Boost、Buck-Boost Boost、SEPIC、Flyback Built-in No WQFN-16(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMMSZ5245B
SOD-123-55℃~+150℃ 1 Independent 100nA@11V 14.25V~15.75V 15V 16Ω 500mW 600Ω SOD-123 Zener Diodes ROHSonsemiZener DiodesB340AXF
DO-214ADSchottky DiodesDiodes IncorporatedAONR21357
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 12.3mΩ@4.5V 2.83nF 25nC@4.5V 30V 34A 365pF DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSMCJ15A
SMC-55℃~+150℃ 1.5kW 15V 18.5V 24.4V 5uA 61.5A TVS Unidirectional SMC ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)
README
README.mdSpin Coater
To be written
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C7, C8, C9, C14, C22, C25, C26, C27, C28, C29, C30, C31, C32, C33, C36 |
| 7 | 22uF | Capacitor_SMD:C_1210_3225Metric | C6, C11, C15, C16, C19, C21, C24 |
| 6 | 15 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R19, R20 |
| 6 | GSFN6982 | footprints:PPAK3x3 | Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | MMSZ5245B | Diode_SMD:D_SOD-123 | D6, D7, D8, D9, D10, D11 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C12, C20, C35 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C10, C17, C18, C34 |
| 4 | 5.1k | Resistor_SMD:R_0805_2012Metric | R5, R12, R13, R14 |
| 4 | B340AXF | Diode_SMD:D_SMA | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R21, R22 |
| 3 | TestPoint | footprints:TestPoint_THTPad_D5.5mm_Drill3.5mm | M1A1, M1B1, M1C1 |
| 2 | 20nF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 49.9k | Resistor_SMD:R_0805_2012Metric | R1, R7 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 1.65k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 18.7k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1mF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C23 |
| 1 | 2.8k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 220pF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 3.3uH | footprints:HPC5040NF | L2 |
| 1 | 330nF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 5.1 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5.6uH | footprints:HPAL1V0630 | L1 |
| 1 | 66.5k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | AONR21357 | footprints:PPAK3x3 | Q1 |
| 1 | AP62200TWU | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | DRV8300D | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U6 |
| 1 | HUSB238_xxxDD | Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm | U2 |
| 1 | Keypad | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | SW3 |
| 1 | LM5157 | footprints:WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Motor Encoder In | Connector_JST:JST_ZH_B6B-ZR_1x06_P1.50mm_Vertical | J2 |
| 1 | NHD-C0220BIZ | Display:NHD-C0220BiZ | U4 |
| 1 | NetTie_2 | footprints:NetTie-2_SMD_Pad0.25mm | NT1 |
| 1 | SMCJ15A | Diode_SMD:D_SMC | D5 |
| 1 | SW_Push_LED | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | SW4 |
| 1 | USB_B_Micro | footprints:UJ2-MIBH-G-SMT-TR | J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | footprints:UJ20-C-H-G-SMT-2A-P16-TR | J1 |
More from hacker-fab/uw-spincoater
1- 2 layers150 × 110 mm

Similar boards
- 6 layers70 × 45 mm

Computing power hub
bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
184 parts5Apache-2.0 - 2 layers88 × 130 mm

Windowmaster controller v2
Simplycissmus/windowmaster-s3-controller
Open hardware and ESP32-S3 firmware for a local 24 V window actuator controller with MQTT and Home Assistant integration.
68 parts1 - 2 layers70 × 54.5 mm

Supply
Supermagnum/48power
A small PCB that supplies +48 volt phantom power to a balanced audio system. It also has audio out.
39 parts4CC0-1.0 - 4 layers52 × 70 mm

- 4 layers100 × 60 mm

Transistor hfe measurement circuit
mjm-12/transistor-hfe-measurement-circuit
Transistor hFE measurement circuit (KiCad, CERN-OHL-P-2.0)
96 parts1CERN-OHL-P-2.0 - 4 layers60 × 102 mm

Anthracite top
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
222 parts5CERN-OHL-S-2.0 - 6 layers36 × 47.4 mm

- 4 layers86.4 × 61.9 mm

Inverter
Kirg5/2040Inverter
RP2040 Based BLDC Inverter for sensored motors, capable of putting out 50a 100v
106 parts1
Questions
How big is the Spin Coater PCB?
It measures 135 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spin Coater use?
100 parts, built around the ESP32-S3-WROOM-1-N8, AP62200TWU, DRV8300DPW and LM5157RTE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spin Coater KiCad files?
From the hacker-fab/uw-spincoater repository on GitHub, at the commit this page was made from: the board is schematic/Spin_Coater.kicad_pcb and its schematic BLDC_Proto/BLDC_Proto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spin Coater design in my own project?
Its repository states no licence, so its author keeps all rights: ask hacker-fab before reusing the design.