

Plaqchek power
circuit simulations, schematics, PCB design files
- Size
- 52 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 52
- Pads
- 250
- Tracks, vias
- 216, 232
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Oct 2024
- Updated
- 21 Mar 2025
Overview
Plaqchek power is an open-source printed circuit board by PLAQCHEK, from the PLAQCHEK/Hardware_Design repository on GitHub. It is a 4-layer board of 52 × 70 mm with 101 parts on 52 nets, routed with 216 tracks and 232 vias.
It is built around the LM43601PWP, LM5157RTE and TPS54202DDC, with the TPS62175DQC among its other parts. Its parts include 37 resistors, 26 capacitors, 5 diodes, 4 ICs and 4 connectors.
Main components
4LM43601PWP
HTSSOP-16-EP-40℃~+125℃@(TJ) 1 1A 1V~28V 2.2MHz 3.5V~36V 33uA Adjustable Buck Built-in Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Output voltage tracking、Built-in LDO regulator Step-down type Yes HTSSOP-16-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM5157RTE
WQFN-16(3x3)-40℃~+125℃@(TJ) 1 1.5V~45V 1.5V~48V 2.2MHz 6.5A 670uA Adjustable Boost、Buck-Boost Boost、SEPIC、Flyback Built-in No WQFN-16(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54202DDC
SOT23-64.5V to 28V Input, 2A Output, EMI Friendly Synchronous Step Down ConverterTexas InstrumentsUncategorisedTPS62175DQC
SON104.75-28VDC to 1-6VDC, 500mA Step-Down Converter with Sleep ModeTexas InstrumentsUncategorised
README
README.mdHardware_Design
circuit simulations, schematics, PCB design files
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R35, R36, R37 +1 |
| 17 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 +1 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | RED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C27, C28 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C8, C29 |
| 3 | 10kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C26 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C23, C34 |
| 2 | 100kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R13 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C30 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C35 |
| 2 | 250R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R34 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C33, C37 |
| 1 | 105kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 10uH | plaqchek:78438336100 | L5 |
| 1 | 10uH | plaqchek:744025100 | L4 |
| 1 | 110kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 187kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 1MegR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 1V 150mA | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 2.49MegR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 2.49kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 2.5kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 22.1kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 3.3uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 300pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 33uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L6 |
| 1 | 383kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 470nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31 |
| 1 | 5.1R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 56pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | 68uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 75R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 1 | 8.2uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 9.76kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LM43601 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U2 |
| 1 | LM5157 | Package_DFN_QFN:WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U1 |
| 1 | TPS54202DDC | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | TPS62175DQC | Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm | U9 |
More from PLAQCHEK/Hardware_Design
3- 4 layers51 × 59 mm

- 4 layers46 × 59 mm

Plaqchek potentiostat
PLAQCHEK/Hardware_Design
circuit simulations, schematics, PCB design files
63 parts - 2 layers55 × 71 mm

Similar boards
- 4 layers158.5 × 99.9 mm

- 2 layers70 × 54.5 mm

Supply
Supermagnum/48power
A small PCB that supplies +48 volt phantom power to a balanced audio system. It also has audio out.
39 parts4CC0-1.0 - 2 layers135 × 80 mm

- 4 layers40.6 × 17.8 mm

- 4 layers204 × 85 mm

Nixie clock
MG-5/nixie-clock-hardware
Hardware for controlling six Nixie IN-14 tubes as clock (HH:MM:SS)
168 parts2MIT - 4 layers192 × 71.8 mm

Vfd clock
MG-5/vfd-clock-hardware
Hardware for controlling six VFD IV-17 tubes as clock (HH:MM:SS)
130 parts1MIT - 2 layers42 × 65 mm

- 2 layers127.4 × 128.1 mm

Ek80-pico
e-abdi/EK80-Seaglider
Integration of a Simrad EK80 echosounder on a Seaglider: mounting brackets and the noise suppressor interface board.
112 parts
Questions
How big is the Plaqchek power PCB?
It measures 52 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Plaqchek power use?
101 parts, built around the LM43601PWP, LM5157RTE, TPS54202DDC and TPS62175DQC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plaqchek power KiCad files?
From the PLAQCHEK/Hardware_Design repository on GitHub, at the commit this page was made from: the board is plaqchek_power/plaqchek_power.kicad_pcb and its schematic plaqchek_OLD/heater.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plaqchek power design in my own project?
Its repository states no licence, so its author keeps all rights: ask PLAQCHEK before reusing the design.