Skip to the content
123456789101112131415161717171717

LM43601PWP

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1A 1V~28V 2.2MHz 3.5V~36V 33uA Adjustable Buck Built-in Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Output voltage tracking、Built-in LDO regulator Step-down type Yes HTSSOP-16-EP DC-DC Converters ROHS

Part id
ti/LM43601PWP
Category
DC DC Converters
Package
HTSSOP-16-EP
Pins
16
In stock
2,378 at JLCPCB (C486030)
Used on
2 open-source boards

Overview

The LM43601PWP is a DC DC Converter made by Texas Instruments in a HTSSOP-16-EP package with 17 pins. -40℃~+125℃@(TJ) 1 1A 1V~28V 2.2MHz 3.5V~36V 33uA Adjustable Buck Built-in Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Output voltage tracking、Built-in LDO regulator Step-down type Yes HTSSOP-16-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM43602QPWPRQ1, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-EP, from EasyEDA), ready for a KiCad board. 2,378 are in stock at JLCPCB (part C486030). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1SW2SW3CBOOT4VCC5BIAS6SYNC7RT8PGOOD9FB10AGND11SS/TRK12EN13VIN14VIN15PGND16PGND17PAD
EasyEDA_Cloud:LM43602QPWPRQ1From EasyEDA

Footprint

123456789101112131415161717171717
EasyEDA_Cloud:HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-EPFrom EasyEDA

Pinout

17
The pins of the LM43601PWP
PinNameType
1SWUnspecified
2SWUnspecified
3CBOOTUnspecified
4VCCUnspecified
5BIASUnspecified
6SYNCUnspecified
7RTUnspecified
8PGOODUnspecified
9FBUnspecified
10AGNDUnspecified
11SS/TRKUnspecified
12ENUnspecified
13VINUnspecified
14VINUnspecified
15PGNDUnspecified
16PGNDUnspecified
17PADUnspecified

Open-source boards using it

2
  • 4 layers52 × 70 mmPlaqchek power, the printed circuit board in 3D

    Plaqchek power

    PLAQCHEK/Hardware_Design

    circuit simulations, schematics, PCB design files

    101 parts
  • 4 layers158.5 × 99.9 mmProcessor Board, the printed circuit board in 3D

    Processor Board

    N7IFC/ODR-1_Hardware

    Hardware files for ODR-1 Radio

    339 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM43601PWP?

Yes. The symbol is EasyEDA_Cloud:LM43602QPWPRQ1 and the footprint EasyEDA_Cloud:HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM43601PWP?

HTSSOP-16-EP, with 17 pins. Its footprint is drawn on this page.

Where is the LM43601PWP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM43601PWP?

JLCPCB lists it as part C486030, with 2,378 in stock; the sellers' links on this page open their listings.

What can replace the LM43601PWP?

Parts like it in the library: the TPS54394PWP by Texas Instruments, the A7987 by STMicroelectronics, the LM536025QPWPTQ1 by Texas Instruments and the LM53603AMPWP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM43601PWP?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.