

Nano supply v2b
Compact open source Eurorack USB-C power supply.
- Size
- 162 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 34
- Pads
- 235
- Tracks, vias
- 304, 412
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Dec 2025
- Updated
- 8 Sep 2026
Overview
Nano supply v2b is an open-source printed circuit board by xx0x, from the xx0x/nano-supply repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 162 × 40 mm with 54 parts on 34 nets, routed with 304 tracks and 412 vias.
It is built around the SPBW03F-05, LTV-817S and AONR21307, with the BZT52C15, MMBT3904 and XL-3210SURUGC among its other parts. Its parts include 15 capacitors, 11 resistors, 9 connectors, 5 diodes and 2 ICs. It belongs with the power and audio and music boards of this library.
Main components
6SPBW03F-05
SIP,21.8x9.2mm1 5V 600mA 81% 9V~36V SIP,21.8x9.2mm Power Module/Power Supply ROHSMWDC-DC Power ModulesLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsAONR21307
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 1.8V 1.995nF 24A 260pF 300pF 30V 35nC@10V 5W、28W 9.2mΩ@10V DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBZT52C15
SOD-123-65℃~+150℃ 1 Independent 100nA@1V 13.8V~15.6V 15V 200Ω 30Ω 370mW SOD-123 Zener Diodes ROHSDiodes IncorporatedZener DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)XL-3210SURUGC
SMD-4P,3.2x1.5mm-40℃~+85℃ 120° 180mcd、750mcd 2.4V、3.4V 20mA 50mW、70mW 520nm~530nm、620nm~630nm 525nm、625nm Red, Emerald Green Side View Mount Water Clear SMD-4P,3.2x1.5mm LED Indication - Discrete ROHSXINGLIGHTLED Indication - Discrete
README
README.mdNano Supply
Compact open source Eurorack USB-C power supply. Uses USB-PD and requires at least 9V; should work with most USB-C fast chargers for phones and laptops.
Lights red on unsupported USB charger, and green when all is OK.
Specs
- up to 1250 mA @ +12V
- up to 1250 mA @ -12V
- up to 600 mA @ +5V
How it looks?
Schematics
How to get it?
You can find gerber/BOM/CPL files inside pcb/nano-supply-v2b/jlcpcb/production_files, the Nano Supply is not available for purchase neither as a kit or built unit at the moment.
License
CERN-OHL-P-2.0
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10u | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 6 | IDC 2x8 SMD | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical_SMD | J3, J4, J5, J6, J7, J8 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H3, H4, H5, H6, H7, H8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | AONR21307 | nano-supply:TRANS_AONR21307 | Q1 |
| 1 | BZT52C15 | Diode_SMD:D_SOD-123 | D5 |
| 1 | Conn_01x02_Pin | nano-supply:TestPads_1x02_P2.54mm | J9 |
| 1 | Conn_01x03_Pin | nano-supply:TestPads_1x03_P2.54mm | J2 |
| 1 | DKMW30F-12 | nano-supply:CONV_DKMW30F-12 | VR1 |
| 1 | HUSB238_xxxDD | Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm | U1 |
| 1 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U2 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | NA | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | SPBW03F-05 | nano-supply:SPBW03F-05_MWU | VR2 |
| 1 | USB_C_Receptacle_USB2.0_16P | nano-supply:TYPE-C-31-M-12 | J1 |
| 1 | XL-3210SURUGC | nano-supply:XL-3210SURUGC | D1 |
Similar boards
- 4 layers36 × 77 mm

- 2 layers200 × 120 mm

- 4 layers164.9 × 102 mm

Carrier
AJXD2/carplay-project
One board that turns the Pi 4 + 7" screen into a complete car radio replacement. It bolts onto the Pi like a HAT, plugs into the truck's radio harness, and does everything the factory radio did plus what the Pi needs:
171 parts - 6 layers75 × 75 mm

Ossm flagship
openvalence/Hardware
The OSSM Flagship PCB (ESP32-P4 + ESP32-C6) and everything physical around it. KiCad, CERN-OHL-S.
298 partsCERN-OHL-S-2.0 - 6 layers190 × 140 mm

- 2 layers68.7 × 22.9 mm

Burnwing
CubeSource/Burnwing
A burnwire release mechanism development board. Featherwing form factor.
75 parts4 - 2 layers70.6 × 72.9 mm

- 2 layers

Questions
How big is the Nano supply v2b PCB?
It measures 162 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nano supply v2b use?
54 parts, built around the SPBW03F-05, LTV-817S, AONR21307 and BZT52C15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nano supply v2b KiCad files?
From the xx0x/nano-supply repository on GitHub, at the commit this page was made from: the board is pcb/nano-supply-v2b/nano-supply-v2b.kicad_pcb and its schematic pcb/nano-supply-v2b/nano-supply-v2b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nano supply v2b design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).