

Hot Plate
A 140W universal USB-C powered PCB Hot Plate!
- Size
- 91 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 63
- Pads
- 215
- Tracks, vias
- 265, 46
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2026
- Updated
- 20 Apr 2026
Overview
Hot Plate is an open-source printed circuit board by lekangji, from the lekangji/PCB-Hot-Plate repository on GitHub, published under the MIT licence. It is a 2-layer board of 91 × 65 mm with 61 parts on 63 nets, routed with 265 tracks and 46 vias.
It is built around the HM8342S, MIC4426YM and TLV9002IDR-MS, with the CH224A, TS-1095PS-A1B2-C3D2 and BZT52C15 among its other parts. Its parts include 16 resistors, 11 capacitors, 5 diodes, 5 connectors and 4 ICs.
Main components
11HM8342S
SOP-8-EP-40℃~+125℃ 1 2A 4.75V~40V 400kHz~600kHz 800mV~24V Adjustable Buck Buck Built-in Yes SOP-8-EP DC-DC Converters ROHSGATEMODEDC-DC ConvertersMIC4426YM
SOIC-8Gate DriversTokmasTLV9002IDR-MS
SOIC-8-2.75V~-900mV、900mV~2.75V -40℃~+85℃ 1.8V~5.5V 1.8uV/℃ 1MHz 1V/us 1mV 1pA 2 28uA 45mA 5pA 65nV/√Hz@1kHz 80dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierCH224A
ESSOP-10-40℃~+105℃ 140W 1C 4V~30V 5V、9V、12V、15V、20V、28V PD 3.2、BC 1.2、AVS、PPS、SPR Power Receiver Controller ESSOP-10 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDTS-1095PS-A1B2-C3D2
SMD-4P,6x6mm1.8N 4.3mm 6mm 6mm Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,6x6mm Tactile Switches ROHSYuandiTactile SwitchesBZT52C15
SOD-123-65℃~+150℃ 1 Independent 100nA@1V 13.8V~15.6V 15V 200Ω 30Ω 370mW SOD-123 Zener Diodes ROHSDiodes IncorporatedZener DiodesGDNR6045-6R8MTF
SMD,6x6mm3.3A 3A 40mΩ 6.8uH Magnetic Shielded Inductor ±20% SMD,6x6mm Power Inductors ROHSGUDIANPower InductorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesXR10N04S
SOP-8-55℃~+150℃ 1 N-channel 10A 12mΩ@10V 20W 22.9nC@10V 2V 40V 964pF 96pF N-Channel SOP-8 MOSFETs ROHSXNRUSEMIMOSFETsXR1365-220M
SMD,13.5x12.6mm10A 12A 22uH 42mΩ ±20% SMD,13.5x12.6mm Power Inductors ROHSXRPower InductorsXR25P04F
PDFN5060-8LMOSFETsXNRUSEMI
README
README.md
PCB Hot Plate
A 140W universal USB-C powered PCB Hot Plate!
| Controller | Heating Element |
|---|---|
![]() | ![]() |
Description
A 140W USB-C-powered PCB hot plate for precise heating, such as for solder reflow. It uses a USB-C power input for accessibility and uses an aluminium PCB heating element driven a switching MOSFET, along with thermistors to monitor temperature, USB-C negotiation, and real-time current/voltage monitoring.
Motivation
My motivation for this project was to create a low-cost, customizable, fully controllable PCB hotplate for electronics work, like soldering or heating stuff up. I thought that other hotplates online were very expensive and lacked the power I wanted. By designing a custom solution, I made a new hot plate capable of higher wattage (140W) and better flexibility.
Features
- Powered by the pi pico
- Supports 140W (28V, 5A) from USB-C
- Compatible with any usb-c device
- 1.8 inch LCD screen
- 4 buttons to control
- LEDS for visualization
- Seperated heating element and controller for ease of replacement
- Temperature control
BOM
| Name | Purpose | Quantity | Total Cost (USD) | Link | Distributor |
|---|---|---|---|---|---|
| 1.8in LCD Screen | See navigation + temp + UI | 1 | 3.79 | https://www.aliexpress.us/item/3256811557250210.html | Aliexpress |
| 2.54mm Pin Headers - Male | Fill in the 1x6 and the 1x4 pin headers | 1 | 4.19 | https://www.aliexpress.us/item/3256806547306536.html | Aliexpress |
| 2.54mm Pin Headers - Female | Breakaway headers to fill in the 1x8 spot for the LCD Screen | 1 | 4.66 | https://www.aliexpress.us/item/3256806547306536.html | Aliexpress |
| PCB Heating Element | The actual heating element to heat it up. | 10 | 5.00 | JLCPCB | |
| Controller PCB | The actual fr-4 pcb to control all of this | 10 | 5.00 | JLCPCB | |
| Diode Independent 40V 3A Surface Mount SMA(DO-214AC) | 20 | 0.66 | GOODWORK | ||
| 1uF ±10% 50V Ceramic Capacitor X5R 0603 | 50 | 0.39 | Samsung Electro-Mechanics | ||
| 100nF ±10% 50V Ceramic Capacitor X7R 0603 | 100 | 0.31 | YAGEO | ||
| 22uF ±20% 35V Aluminum Electrolytic Capacitors 2000hrs@105℃ | 40 | 1.28 | KNSCHA | ||
| 49.9kΩ ±1% 100mW 0603 Thick Film Resistor | 100 | 0.15 | UNI-ROYAL | ||
| 100uF ±20% 35V Aluminum Electrolytic Capacitors 2800hrs@105℃ | 20 | 0.78 | DMBJ | ||
| 5pA 2 2V/us 1MHz Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Instrumentation, Op Amps, Buffer Amps RoHS | 10 | 1.18 | TI | ||
| Buck Switching Regulator IC Adjustable 0.8V~24V 1 Output 2A SOP-8-EP | 10 | 1.19 | GATEMODE | ||
| 5V~18V 1.5A SOIC-8 Gate Drivers RoHS | 10 | 3.12 | Tokmas | ||
| 3A 6.8uH ±20% 40mΩ 3.3A Magnetic Shielded Inductor SMD,6x6mm | 10 | 0.37 | GUDIAN | ||
| 100mW 56kΩ 75V Thick Film Resistor ±1% 0603 | 100 | 0.16 | YAGEO | ||
| 210kΩ ±1% 100mW 0603 Thick Film Resistor | 100 | 0.15 | UNI-ROYAL | ||
| 82kΩ ±1% 100mW 0603 Thick Film Resistor | 100 | 0.11 | FOJAN | ||
| 100mW 1kΩ 75V Thick Film Resistor ±1% 0603 | 100 | 0.15 | YAGEO | ||
| 10mΩ 1W ±1% 1206 Chip Resistor | 10 | 0.47 | JIERR | ||
| 10Ω ±1% 100mW 0603 Thick Film Resistor | 100 | 0.10 | FOJAN | ||
| 100mW 10kΩ 75V Thick Film Resistor ±1% 0603 | 100 | 0.15 | YAGEO | ||
| 5.1kΩ ±1% 100mW 0603 Thick Film Resistor | 100 | 0.12 | FOJAN | ||
| 100mW 330Ω 75V Thick Film Resistor ±1% 0603 | 100 | 0.15 | YAGEO | ||
| P-Channel 40V 25A Surface Mount PDFN5060-8L | 10 | 1.06 | XNRUSEMI | ||
| N-Channel 40V 10A Surface Mount SOP-8 | 10 | 0.77 | XNRUSEMI | ||
| 10A 22uH ±20% SMD Inductor | 10 | 3.22 | XR | ||
| Tactile Switch SPST 180gf 6mm x 6mm SMD | 40 | 2.28 | Yuandi | ||
| Female Header 20 Position 2.54mm Pitch | 20 | 2.25 | HanElectricity | ||
| USB-C Receptacle Connector 16 Position SMD | 10 | 1.85 | Korean Hroparts Elec | ||
| Zener Diode 15V 500mW SOD-123 | 50 | 0.73 | MDD | ||
| Emerald Green LED 0603 | 100 | 0.61 | YONGYUTAI |
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LOGO | LOGO | G***, G***, G***, G***, G***, G*** |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C7, C8, C13 |
| 4 | TS-1095PS-A1B2-C3D2 | easyeda2kicad:KEY-SMD_4P-L6.0-W6.0-P3.90-LS9.0 | SW1, SW2, SW3, SW4 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7, R13 |
| 3 | 22uF | Capacitor_SMD:CP_Elec_5x5.4 | C1, C2, C5 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R12 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D6 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R14 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C9 |
| 2 | 49.9K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R11 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 10 mΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C10 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 210K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 56K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 82K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | BZT52C15 | Diode_SMD:D_SOD-123 | D5 |
| 1 | CH224A | easyeda2kicad:ESSOP-10_L4.9-W3.9-P1.0-LS6.0-TL-EP | U6 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | GDNR6045-6R8MTF | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | HM8342S | easyeda2kicad:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-1 | U4 |
| 1 | LOGO | Graphics:Logo_mini | G*** |
| 1 | LOGO | Graphics:Logo_small | G*** |
| 1 | MIC4426 | easyeda2kicad:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | SS34 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | TLV9002IDR | easyeda2kicad:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U5 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | XR10N04S | easyeda2kicad:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | Q3 |
| 1 | XR1365-220M | easyeda2kicad:IND-SMD_L13.5-W12.6_YSPI1335T-1R0M | L2 |
| 1 | XR25P04F | easyeda2kicad:PDFN-8_L5.8-W5.0-P1.27-LS6.1-BL | Q4 |
The 57 most common of 61 parts.
More from lekangji/PCB-Hot-Plate
1- 2 layers99.9 × 100 mm

Similar boards
- 2 layers40.1 × 40.1 mm

- 2 layers101.2 × 199.1 mm

- 2 layers69.8 × 68 mm

- 4 layers69.8 × 68 mm

- 4 layers70 × 50 mm

PD Smart Supply
JaphD/USB-C-PD-Smart-Power-Supply
A compact STM32-controlled USB-C Power Delivery supply providing selectable 5 V, 9 V, 12 V, and 20 V outputs up to 3 A.
73 parts - 2 layers68 × 46 mm

Ardor IO
balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.
81 parts18MIT - 2 layers57.5 × 40.5 mm

Ti MSP v2
akshat-kumar10/MSMP0_PCB
A PCB for an MSMP0 board that features a Modbus Transceiver & Analog Front-End (AFE) for Sensors
42 parts - 2 layers164 × 35 mm

Resistive Sensor PCB
broskifoo/resistive-sensor-signal-conditioning-pcb
PCB Design Project 1
23 partsMIT
Questions
How big is the Hot Plate PCB?
It measures 91 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hot Plate use?
61 parts, built around the HM8342S, MIC4426YM, TLV9002IDR-MS and CH224A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hot Plate KiCad files?
From the lekangji/PCB-Hot-Plate repository on GitHub, at the commit this page was made from: the board is pcb/controller/project/Hot-Plate.kicad_pcb and its schematic pcb/controller/project/Hot-Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hot Plate design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

