UART

39 boards

KiCad boards from 36 GitHub repositories tagged “uart”, the most starred first; open any of them in PCBKit.

2 layers33.5 × 20 mm
JURA WiFi Dongle
Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.
31 parts86GPL-3.0
4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0
2 layers16 × 19 mm
DebugEdge Target Tester
debug-edge/DebugEdge
A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
12 parts44
4 layers60 × 60 mm
ASPECT2
xboxoneresearch/ASPECT2-PCB
Facet2 FabA PCB Clone
132 parts18
2 layers25.4 × 30.5 mm
Roomba
kg333/roomba_esp_wifi
Board for adding wifi using ESP-12 to Roomba 500/600 series
16 parts16
2 layers24 × 27.9 mm
UartFEC
medo64/UartFEC
Framework laptop expansion card exposing serial TTL interface
20 parts13MIT
4 layers25.5 × 22.4 mm
Wi se rewirable
depau/wi-se-hw
Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely
51 parts11
2 layers70 × 15.5 mm
Avaja
Haimrich/avaja
RISC-V Debug Probe USB-C PMOD JTAG+UART
63 parts11
2 layers61 × 40.6 mm
UB AT328 proto
danko-david/uartbus
A library that turns microcontroller's UART peripheral to a simple, multi-master bus system. The project also features an RPC library for a microcontroller, device auto-discovery, code upload, gateway between the bus…
32 parts6MIT
2 layers39.4 × 48.3 mm
Midi uart adapter
tschiemer/midi-uart-adapter
PCB layout for a simple MIDI (In-Through-Out) / UART - Adapter according to MIDI 1.0 Specification
25 parts5MIT
4 layers52.7 × 42.5 mm
OmniProbe
emertcakir/OmniProbe
Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040
77 parts4MIT
2 layers58.4 × 64.8 mm
Project embeddedSystemDesign2
Fescron/Project-LabEmbeddedDesign2
Project-LabEmbeddedDesign2
41 parts3GPL-3.0
2 layers21 × 36 mm
Ir uart
werediver/ir-uart
IR UART 9600 baud adapter
23 parts3CERN-OHL-P-2.0
2 layers30.5 × 8.9 mm
Kindle adapter
edoput/kindle-adapter
easy connect to your kindle serial debug port
2 parts2
2 layers66.6 × 41.3 mm
UPIC46
emertcakir/uPIC46
PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs
111 parts2MIT
2 layers68.6 × 36.6 mm
High accuracy logging volt ampmeter
Fescron/diy-logging-volt-ampmeter
DIY logging voltage/current meter
52 parts2
2 layers50.8 × 24.1 mm
Embedded debug
stephendpmurphy/embedded-debug
The embedded debug board can be used to provide access to Target MCU debug UART lines carried on unused traces of a 10pin SWD connector
23 parts2CC-BY-SA-4.0
2 layers26.7 × 25.4 mm
Oft
0x007E/oft
Optical Fibre Transceiver
28 parts1
2 layers25.9 × 19.3 mm
Uart data logger
123swk123/uart_data_logger
UART data logger to SD card using CH32V003
14 parts1MIT
2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1
2 layers65 × 30 mm
Rpi breakout
mtrudel/rpi-breakout
A simple Raspberry Pi pHAT to break out common interfaces & GPIO
37 parts1
2 layers34.5 × 26.4 mm
U3a rs232
0x007E/u3a_rs232
RS232-Adapter module for U3A
16 parts
2 layers34.5 × 26.4 mm
U3a rs422
0x007E/u3a_rs422
RS422-Adapter module for U3A
17 parts
2 layers34.5 × 26.4 mm
U3a rs485
0x007E/u3a_rs485
RS485-Adapter module for U3A
18 parts