2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers16 × 19 mm
DebugEdge Target Tester
debug-edge/DebugEdge44A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
- Size
- 16 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 20
- Tracks, vias
- 26, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Aug 2020
- Updated
- 3 Dec 2020
Overview
DebugEdge Target Tester is an open-source printed circuit board by debug-edge, from the debug-edge/DebugEdge repository on GitHub. It is a 2-layer board of 16 × 19 mm with 12 parts on 10 nets, routed with 26 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdDebug Edge
A small bridge board to link a programmer to a PCB, via a card edge connector. See debug-edge.io for more the full specification and rationale.
Goals
A nice, easy to use debug/flash probe adapter that can quickly and easily connect to a board, staying put as you need it!
Concept
Greg Davill mentioned coming across the AVX Open Ended Card Edge connector, and Scott Shawcroft followed up that it'd be a good idea to explore a conversion from a typical 10-pin SWD/JTAG connector to the card edge format.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 1 | DebugEdge_02x05 | Connector_DebugEdge:DebugEdge_2x05_Target | J1 |
| 1 | Val** | Connector_DebugEdge:DebugEdge_URL_Silk | Ref** |
Questions
How big is the DebugEdge Target Tester PCB?
It measures 16 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DebugEdge Target Tester use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DebugEdge Target Tester KiCad files?
From the debug-edge/DebugEdge repository on GitHub, at the commit this page was made from: the board is DebugEdge_Target_Tester/DebugEdge_Target_Tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DebugEdge Target Tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask debug-edge before reusing the design.
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696