Skip to the content
2 layers34.5 × 26.4 mmU3a rs422, the printed circuit board in 3D

RS422-Adapter module for U3A

Size
34.5 × 26.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
26
Pads
67
Tracks, vias
99, 22
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Nov 2025
Updated
22 Jun 2026

Overview

U3a rs422 is an open-source printed circuit board by 0x007E, from the 0x007E/u3a_rs422 repository on GitHub. It is a 2-layer board of 34.5 × 26.4 mm with 17 parts on 26 nets, routed with 99 tracks and 22 vias.

Its parts include 3 capacitors, 3 resistors, 3 connectors and 2 ICs. It belongs with the interfaces and adapters and radio and wireless boards of this library.

README

README.md

Version: 1.0 Release License CC By-NC-SA Build

U3A_rs422 - RS422 - Adapter for U3A

Ask DeepWiki

The U3A_rs422 project is based on a (THVD1452) that ist used to change the RX/TX signals to the required differential signal level of TIA/TIA-485-A standard. It can simply be adapted to the U3A-Module.

To use it with a DSUB connector it is necessary to create a connector cable that can be plugged into the IDC connector.

ExperienceLevel
Soldering?%
Mechanical?%

Downloads

TypeFileDescription
Schematicpdf / cadlabSchematic files
Boardpdf / cadlabBoard file
DrillpdfDrill file
BoMxlsx / htmlBill of Material as Excel/interactive HTML
PCBzip / tarKiCAD/Gerber/BoM/Drill files
Mechanicalzip / tarFreeCAD/Housing and PCB (STEP/STL) files

Hardware

There are two parts of the hardware. The pcb and the housing of the U3A_rs422. The pcb is created with KiCAD and the housing with FreeCAD. All files are built with github actions so that they are ready for a production environment. The housing is printed with a 3D-printer (Dremel 3D40).

PCB

The circuit board is populated on both sides (Top, Bottom). The best way for soldering the SMD components is within a vapor phase soldering system and for the THT components with a standard soldering system.

Top Layer

Top Layer

Bottom Layer

Bottom Layer

Mechanical

The housing has a tolerance of 0.2mm on each side of the case. So the pcb should fit perfectly in the housing. The tolerance can be modified with FreeCAD in the Parameter Spreadsheet.

Assembled

Assembled

Exploded

Exploded

Connection/Setup

The U3A_rs422 is powerd over the U3A board with 5V. The voltage of the pins are driven by a THVD1452 for data transmission that meets the TIA/TIA-485-A standard.

Simple loopback setup for testing purpose

bash
#
#            +------------------------------------+           +-----------------------------------+      +---------------------+
#            |J1                      T         J2|           |J2     U                       +---+---+  |                     |
#         +--+--+        U3A_rs422    E        +--+--+     +--+--+    S                U      |  USB  |--+ +-----------------+ |
#     +---+ RTS-| (1) D               R        | VCC +-----+ VCC |    B      UPDI      3      +---+---+  | | TeraTerm        | |
#   L | +-+ RTS+| (2) B               M        | GND +-----+ GND |    /    +---+---+   A          |      | | ~~~~~~~~        | |
#   O +-|-+ CTS-| (3) 9               I        |  X  +-----| PDI |    U    |   |   |              |      | | ~~~~~           | |
#   O   +-+ CTS+| (4)                 N        | CTS +-----+ CTS |    A    |   |   |              |      | | ~~~~~~~~~~~~    | |
#   P     + GND | (5)                 A        | RTS +-----+ RTS |    R    | X | X |              |      | |                 | |
#   B   +-+ RXD+| (6) ~               T        | TXD +-----+ TXD |    T    +---+---+     +-+      |      | +-----------------+ |
#   A +-|-+ RXD-| (7) P   T           I        | RXD +-----+ RXD |    /                 / /       |      |                     |
#   C | +-+ TXD+| (8) W   X           O        +--+--+     +--+--+    U               +-+-+-+-+-+-+      | Computer            |
#   K +---+ TXD-| (9) R   D           N           |           |       P               | 5V  | 3V3 |      |                     |
#         +--+--+     E   E           -> 120Ω     |           |       D               +-----+-----+      +---------------------+
#            |        N   N                       |           |       I         J4                |
#            |  +---+---+---+---+---+---+---+---+ |           | +---+---+---+---+---+---+---+---+ |
#            |  | V | C | C | D | D | D | R | G | |           | | V | C | C | D | D | D | R | G | |
#            +--+ C | B | B | C | T | C | I | N +-+           +-+ C | B | B | C | T | C | I | N +-+
#               | C | 3 | 2 | D | R | R |   | D |               | C | 3 | 2 | D | R | R |   | D |
#               +---+-+-+-+-+---+---+---+---+---+               +---+-+-+-+-+---+---+---+---+---+
#                     |   |                                           |   |
#                     |   +-------------------------------------------|---+
#                     +-----------------------------------------------+

Additional Information

TypeLinkDescription
THVD1452pdfUART / RS422 level converter
KiCADwebKiCAD project page
FreeCADwebFreeCAD project page

R. GAECHTER

Parts

17
QtyValueFootprintReferences
2100nCapacitor_SMD:C_1206_3216MetricC2, C3
2120Resistor_SMD:R_1206_3216MetricR2, R3
2MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_PadH1, H2
2THVD1452DRPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU2, U3
110kResistor_SMD:R_1206_3216MetricR1
110uCapacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-CC1
1BINSymbol:WEEE-Logo_4.2x6mm_SilkScreenFID3
1Conn_01x07_SocketConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ2
1Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ4
1Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1ESDSymbol:ESD-Logo_6.6x6mm_SilkScreenFID1
1OHSymbol:OSHW-Logo_5.7x6mm_SilkScreenFID2
1QRImages:QR_0x007e_very_smallFID4

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the U3a rs422 PCB?

It measures 34.5 × 26.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the U3a rs422 use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the U3a rs422 KiCad files?

From the 0x007E/u3a_rs422 repository on GitHub, at the commit this page was made from: the board is pcb/U3A_rs422.kicad_pcb and its schematic pcb/U3A_rs422.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the U3a rs422 design in my own project?

Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.