

U3a rs485
RS485-Adapter module for U3A
- Size
- 34.5 × 26.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 21
- Pads
- 53
- Tracks, vias
- 57, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Nov 2025
- Updated
- 22 Jun 2026
Overview
U3a rs485 is an open-source printed circuit board by 0x007E, from the 0x007E/u3a_rs485 repository on GitHub. It is a 2-layer board of 34.5 × 26.4 mm with 18 parts on 21 nets, routed with 57 tracks and 9 vias.
Its parts include 5 connectors, 3 capacitors, 3 resistors and 1 IC. It belongs with the interfaces and adapters and radio and wireless boards of this library.
README
README.mdU3A_rs485 - RS485 - Adapter for U3A
The U3A_rs485 project is based on a (THVD1452) that ist used to change the RX/TX signals to the required differential signal level of TIA/TIA-485-A standard. It can simply be adapted to the U3A-Module.
To use it with a DSUB connector it is necessary to solder a connection cable to the DSUB that can be connected with the screw terminal.
| Experience | Level |
|---|---|
| Soldering | |
| Mechanical |
Downloads
| Type | File | Description |
|---|---|---|
| Schematic | pdf / cadlab | Schematic files |
| Board | pdf / cadlab | Board file |
| Drill | Drill file | |
| BoM | xlsx / html | Bill of Material as Excel/interactive HTML |
| PCB | zip / tar | KiCAD/Gerber/BoM/Drill files |
| Mechanical | zip / tar | FreeCAD/Housing and PCB (STEP/STL) files |
Hardware
There are two parts of the hardware. The pcb and the housing of the U3A_rs485. The pcb is created with KiCAD and the housing with FreeCAD. All files are built with github actions so that they are ready for a production environment. The housing is printed with a 3D-printer (Dremel 3D40).
PCB
The circuit board is populated on both sides (Top, Bottom). The best way for soldering the SMD components is within a vapor phase soldering system and for the THT components with a standard soldering system.
Top Layer

Bottom Layer

Mechanical
The housing has a tolerance of 0.2mm on each side of the case. So the pcb should fit perfectly in the housing. The tolerance can be modified with FreeCAD in the Parameter Spreadsheet.
Assembled

Exploded

Connection/Setup
The U3A_rs485 is powerd over the U3A board with 5V. The voltage of the pins are driven by a THVD1452 for data transmission that meets the TIA/TIA-485-A standard.
Simple loopback setup for testing purpose
#
# +-----------------------------------+ +-----------------------------------+ +---------------------+
# | J2| |J2 U +---+---+ | |
# | J1 U3A_rs485 +--+--+ +--+--+ S U | USB |--+ +-----------------+ |
# +--+--+ | VCC +-----+ VCC | B UPDI 3 +---+---+ | | TeraTerm | |
# + VCC | T +---+ | GND +-----+ GND | / +---+---+ A | | | ~~~~~~~~ | |
# +-----+ E | X | J | X +-----| PDI | U | | | | | | ~~~~~ | |
# L +---+ A | R | X | 3 | CTS +-----+ CTS | A | | | | | | ~~~~~~~~~~~~ | |
# O | +-+ B | M +---+ | RTS +-----+ RTS | R | X | X | | | | | |
# O +-|-+ Y | ~ . | X | J | TXD +-----+ TXD | T +---+---+ +-+ | | +-----------------+ |
# P +-+ Z | P T 1 | X | 5 | RXD +-----+ RXD | / / / | | |
# B +-----+ W X 2 +---+ +--+--+ +--+--+ U +-+-+-+-+-+-+ | Computer |
# A + GND | R D 0 | | P | 5V | 3V3 | | |
# C +--+--+ E E Ω | | D +-----+-----+ +---------------------+
# K | N N | | I J4 |
# | +---+---+---+---+---+---+---+---+ | | +---+---+---+---+---+---+---+---+ |
# | | V | C | C | D | D | D | R | G | | | | V | C | C | D | D | D | R | G | |
# +-+ C | B | B | C | T | C | I | N +-+ +-+ C | B | B | C | T | C | I | N +-+
# | C | 3 | 2 | D | R | R | | D | | C | 3 | 2 | D | R | R | | D |
# +---+-+-+-+-+---+---+---+---+---+ +---+-+-+-+-+---+---+---+---+---+
# | | | |
# | +-------------------------------------------|---+
# +-----------------------------------------------+Additional Information
| Type | Link | Description |
|---|---|---|
| THVD1452 | UART / RS485 level converter | |
| KiCAD | web | KiCAD project page |
| FreeCAD | web | FreeCAD project page |
R. GAECHTER
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C1, C2 |
| 2 | 120 | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J5 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | BIN | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | FID3 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ESD | Symbol:ESD-Logo_6.6x6mm_SilkScreen | FID1 |
| 1 | OH | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | FID2 |
| 1 | QR | Images:QR_0x007e | FID4 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal | J1 |
| 1 | THVD1452DR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
Similar boards
- 2 layers27.9 × 16.5 mm

- 2 layers42.7 × 13.7 mm

Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm

- 2 layers44 × 51.3 mm

4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm

L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
Questions
How big is the U3a rs485 PCB?
It measures 34.5 × 26.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the U3a rs485 use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the U3a rs485 KiCad files?
From the 0x007E/u3a_rs485 repository on GitHub, at the commit this page was made from: the board is pcb/U3A_rs485.kicad_pcb and its schematic pcb/U3A_rs485.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the U3a rs485 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.