Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers95.8 × 73 mmMicro mouse prashant, the printed circuit board in 3D

    Micro mouse prashant

    prashantbhandary/MicroMouse-LineMaze

    Meshmerize MicroMouse Project

    28 parts4
  • 4 layers86.4 × 54.6 mmRoboCape, the printed circuit board in 3D

    RoboCape

    PREDICT-EPFL/RoboCape

    This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.

    114 parts4
  • 2 layers76.2 × 38.1 mm6502 Watch, the printed circuit board in 3D

    6502 Watch

    ProbablyNotArtyom/6502-Watch

    6502 powered wearable with an LCD screen, keyboard interface, and compact form factor, all running ehBasic to boot.

    32 parts4
  • 2 layers100 × 48 mmFloppy adapter, the printed circuit board in 3D

    Floppy adapter

    proboterror/PC-8801FA-floppy-edge-connector-adapter

    5.25" floppy connector to 3.5" adapter for NEC PC-8801 FA

    4 parts4
  • 2 layers54 × 22 mmCpu programmer, the printed circuit board in 3D

    Cpu programmer

    procks/eater-8bit-cpu-programmer

    Programmer for Ben Eater 8-bit computer

    14 parts4MIT
  • 2 layers71.1 × 23.9 mmNanoDIP, the printed circuit board in 3D

    NanoDIP

    profdc9/NanoDIP

    A PCB with the Arduino Nano pinout but uses the ATMEGA328P

    14 parts4
  • 4 layers89.8 × 64 mmStinger V2.0, the printed circuit board in 3D

    Stinger V2.0

    Project-Stinger/Electronics

    Electronics for Stinger foam dart blasters

    126 parts4
  • 2 layers99.6 × 59.9 mm7segment, the printed circuit board in 3D

    7segment

    prosper00/Circuits

    100 parts4
  • 4 layers100 × 100 mmSolar panel side Z, the printed circuit board in 3D

    Solar panel side Z

    proveskit/solar_boards

    The solar panel boards for the PROVES Kit

    45 parts4CERN-OHL-W-2.0
  • 2 layers101.3 × 102.4 mmOpamp front, the printed circuit board in 3D

    Opamp front

    prydin/opamp-frontend-class-ab

    The result is a fast amplifier (>80V/us slew rate) with low distortion (0.00045% meadured @ 1kHz/1W/8ohm resistive load). It's undergone some preliminary measurements and looks quite promising.

    93 parts4
  • 4 layers81 × 81.3 mmDac ng, the printed circuit board in 3D

    Dac ng

    prydin/toy-dac

    A 1-bit ΔΣ stereo audio DAC implemented on a Xilinx 7-series FPGA (Digilent Cmod S7), driven from an I²S input.

    86 parts4
  • 2 layers31.2 × 39.4 mmFlash Station, the printed circuit board in 3D

    Flash Station

    psi-4ward/HMSensor-FlashStation

    Helper PCB to flash Asksin++ HMSensor PCBs

    8 parts4MIT
  • 2 layers112 × 75.2 mmAQUARIUMCONTROLLER, the printed circuit board in 3D

    AQUARIUMCONTROLLER

    psych0d0g/ESP8266_FishTank

    IOT ESP8266 Fishtank Controller

    47 parts4MIT
  • 2 layers181.6 × 172.3 mmPMK Keyboard, the printed circuit board in 3D

    PMK Keyboard

    PumaFPV/PMK

    PMK - Full wireless split keyboard

    151 parts4MIT
  • 4 layers130 × 40 mmPumaTX MB HW00, the printed circuit board in 3D

    PumaTX MB HW00

    PumaFPV/PumaTX

    DIY FPV Remote controller based on the one from the mavic

    121 parts4MIT
  • 2 layers83.3 × 56.5 mmPhone bell, the printed circuit board in 3D

    Phone bell

    purduehackers/phone-bell

    A Rotary Phone Doorbell

    53 parts4
  • 4 layers75 × 56.4 mmEsp32-c6-wroom1 board, the printed circuit board in 3D

    Esp32-c6-wroom1 board

    pushtiujeniya/esp32-c6-environmental-logger

    This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.

    59 parts4
  • 2 layers115.8 × 85.9 mmPypilot mfd, the printed circuit board in 3D

    Pypilot mfd

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    103 parts4
  • 2 layers106 × 80 mmDisplayboard, the printed circuit board in 3D

    Displayboard

    PyroVision-ThermalCam/Displayboard

    Displayboard for the PyroVision thermal camera.

    27 parts4GPL-3.0
  • 2 layers273.1 × 15.2 mmEurorack bus board horizontal, the printed circuit board in 3D

    Eurorack bus board horizontal

    QuadratClown/eurorack-bus-board-horizontal

    Minimalist eurorack bus-board with horizontal headers, made with focus on shallow skiffs, where each mm additional space matters.

    13 parts4
  • 4 layers69.5 × 62.6 mmSensors Module, the printed circuit board in 3D

    Sensors Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    197 parts4
  • 2 layers55 × 128.4 mmMultipleBuffered, the printed circuit board in 3D

    MultipleBuffered

    Quinienl/Basic-Modules

    These files can be used to build your own PCB's and Panels

    58 parts4
  • 2 layers12.5 × 12.5 mmFPC DIP 4PIN chinaI2C, the printed circuit board in 3D

    FPC DIP 4PIN chinaI2C

    rac2030/breakout-boards

    Various breakoutboards for electronic components I play with

    2 parts4MIT