Skip to the content
2 layers83.3 × 56.5 mmPhone bell, the printed circuit board in 3D

A Rotary Phone Doorbell

Size
83.3 × 56.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
66
Pads
200
Tracks, vias
350, 33
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Jul 2024
Updated
11 Apr 2026

Overview

Phone bell is an open-source printed circuit board by purduehackers, from the purduehackers/phone-bell repository on GitHub. It is a 2-layer board of 83.3 × 56.5 mm with 53 parts on 66 nets, routed with 350 tracks and 33 vias.

It is built around the DRV8871DDA, IP2721 and MT3608, with the SMBJ6.0CA, 3296P-1-104 and AO3400A among its other parts. Its parts include 11 resistors, 10 capacitors, 10 connectors, 4 ICs and 4 diodes. It belongs with the home automation and IoT boards of this library.

Main components

8

README

README.md

Phone Bell

A tool to turn a Western Electric rotary phone into a doorbell for Hack Night

Parts

53
QtyValueFootprintReferences
310KResistor_SMD:R_0603_1608MetricR1, R5, R7
310uFCapacitor_SMD:C_0603_1608MetricC1, C6, C10
3220Resistor_SMD:R_0603_1608MetricR4, R6, R8
3SMBJ6.0CADiode_SMD:D_SMBD2, D3, D4
20.1uFCapacitor_SMD:C_0603_1608MetricC3, C5
2220pfCapacitor_SMD:C_0603_1608MetricC7, C8
25.1KResistor_SMD:R_0603_1608MetricR10, R11
11KResistor_SMD:R_0603_1608MetricR3
11uFCapacitor_SMD:C_0603_1608MetricC9
12.2kResistor_SMD:R_0603_1608MetricR9
120uFCapacitor_SMD:C_0603_1608MetricC2
122uFCapacitor_SMD:C_0603_1608MetricC4
130KResistor_SMD:R_0603_1608MetricR2
13296P-1-104Potentiometer_THT:Potentiometer_Bourns_3296P_HorizontalRV1
1445-1555-2-NDCapacitor_SMD:C_0805_2012MetricL3
1445-1555-2-ND Capacitor_SMD:C_0805_2012MetricL2
1AO3400APackage_TO_SOT_SMD:SOT-23Q1
1DIALConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ12
1DRV8871DDAPackage_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalViasU1
1EXT_ADCConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ3
1FAN_OUTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ11
1HANDSETConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2
1HOOK_SWITCH_TERMConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ6
1IP2721Package_SO:TSSOP-16_4.4x5mm_P0.65mmU4
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU3
1MT3608Package_TO_SOT_SMD:SOT-23-6U2
1RINGER_BELLConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ9
1Raspberry_Pi_2_3Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1SS34Diode_SMD:D_SMAD1
1USB-C_PD_INConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1USB-C_PD_OUTConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
1USB_C_Receptacle_PowerOnly_6PAdditionalComponents:YIYUAN YTC-TC6-560J10
1YPRH104R-220MAdditionalComponents:YPRH104R-220ML1

The 44 most common of 53 parts.

Similar boards

  • 2 layers220 × 300 mmTransit, the printed circuit board in 3D

    Transit

    thebenedict/seattletransit-hardware

    Schematic and PCB for a circuit board map of Seattle area public transit.

    448 parts14CERN-OHL-W-2.0
  • 2 layers100 × 102.6 mmDSP Regulator HAT RevB, the printed circuit board in 3D

    DSP Regulator HAT RevB

    Phil-CIA/Development-Station-Power-Supply

    3 channel bench supply with current and voltage plotting

    163 parts
  • 2 layers114.3 × 25.4 mmIr transmitter, the printed circuit board in 3D

    Ir transmitter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    92 parts
  • 6 layers71.1 × 150.1 mmLed bage, the printed circuit board in 3D

    Led bage

    caesarakalaeii/rgb-badge

    The badge to end all badges, cutomizable functions, crazy tight led matrix

    3,235 partsAGPL-3.0
  • 2 layers100 × 100 mmHeatTable Base v0.9, the printed circuit board in 3D

    HeatTable Base v0.9

    DerSpatz/PCB-reflow-solder-table

    Table version of the PCB heat plate with advanced features and swappable heat plate

    82 parts14MIT
  • 2 layers100 × 100 mmIP2721-USB C breakout, the printed circuit board in 3D

    IP2721-USB C breakout

    louiscklaw/IP2721-USB-C-breakout

    IP2721-USB-C-breakout

    13 parts2

Questions

How big is the Phone bell PCB?

It measures 83.3 × 56.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Phone bell use?

53 parts, built around the DRV8871DDA, IP2721, MT3608 and SMBJ6.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Phone bell KiCad files?

From the purduehackers/phone-bell repository on GitHub, at the commit this page was made from: the board is Electronics/Electronics.kicad_pcb and its schematic Electronics/Electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Phone bell design in my own project?

Its repository states no licence, so its author keeps all rights: ask purduehackers before reusing the design.