

Panelised PD+Display
- Size
- 143.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 198
- Nets
- 162
- Pads
- 599
- Tracks, vias
- 964, 98
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Jul 2024
- Updated
- 27 Mar 2025
Overview
Panelised PD+Display is an open-source printed circuit board by Sitengwu, from the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub. It is a 2-layer board of 143.5 × 70 mm with 198 parts on 162 nets, routed with 964 tracks and 98 vias.
It is built around the STM32G030C8T6, TPS5430DDAR and IP2721, with the LM358DR2GH, AO3401A and AO3400A among its other parts. Its parts include 54 resistors, 47 connectors, 25 ICs, 24 diodes and 20 capacitors. It belongs with the lEDs and displays boards and the ESP32 and STM32 boards of this library.
Main components
11STM32G030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2V~3.6V 32 Bit 44 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TPS5430DDAR
SOIC-8-EP-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersIP2721
TSSOP-16-40℃~+85℃ 1C 3V~25V 5V、15V、20V PD 2.0、PD 3.0 Power Receiver Controller TSSOP-16 USB PD ROHSINJOINICInterface - SpecializedLM358DR2GH
SOIC-80℃~+70℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 5nA 70dB 7uV/℃ Built-in compensation、ESD Protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMJD44H11J
DPAK-55℃~+150℃ 1 NPN 160MHz 1V 20W 50uA 60 6V 80V 8A NPN DPAK Bipolar (BJT) ROHSNexperiaBipolar (BJT)TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesTYPE-C 6P
SMD-30℃~+85℃ 1 3,000 Cycles 3A 5V 6.8mm 6P Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSSHOU HANUSB ConnectorsXC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
198| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | XL-1615RGBC-WS2812B | Library:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | D3, D4, D10, D11, D12, D13, D14, D15, D16, D18, D19, D20, D21, D22, D23, D24 +5 |
| 18 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J10, J11, J20, J21, J23, J24, J30, J33, J34, J35, J36, J37, J38, J39 +2 |
| 14 | AO3401A | Library:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | U6, U7, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U23, U24 |
| 13 | 100k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R14, R15, R17, R19, R21, R23, R24, R26, R27, R30, R51, R53 |
| 12 | 1k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13, R16, R18, R20, R22, R25, R28, R29, R31, R50, R52 |
| 11 | TestPoint | Library:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 10 | 100 | Resistor_SMD:R_1206_3216Metric | R40, R41, R42, R43, R44, R45, R46, R47, R48, R49 |
| 8 | M3 | Library:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | 0.1uF | Library:C_0402_1005Metric | C12, C15, C18, C20 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R8, R37, R38, R39 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C14, C17, C19 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R32, R33, R34, R36 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8, C10 |
| 3 | 10k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11, R35 |
| 3 | CFG | Library:CONN-SMD_YZF0002-38080-02 | J6, J19, J26 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J22, J40, J47 |
| 3 | GND | Library:CONN-SMD_YZF0002-38080-02 | J5, J15, J25 |
| 3 | RX | Library:CONN-SMD_YZF0002-38080-02 | J8, J14, J27 |
| 3 | SEL | Library:CONN-SMD_YZF0002-38080-02 | J7, J17, J31 |
| 3 | TX | Library:CONN-SMD_YZF0002-38080-02 | J13, J16, J28 |
| 3 | VCC | Library:CONN-SMD_YZF0002-38080-02 | J12, J18, J29 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C3, C9 |
| 2 | 10pF | Library:C_0402_1005Metric | C11, C13 |
| 2 | 12k | Resistor_SMD:R_0603_1608Metric | R1, R6 |
| 2 | 220uF | Library:CAP-SMD_L3.5-W2.8 | C4, C7 |
| 2 | 22uH | Library:IND-SMD_L7.3-W6.6_MHCI06030 | L1, L2 |
| 2 | 3.9k | Resistor_SMD:R_0603_1608Metric | R3, R7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J41, J42 |
| 2 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J44, J46 |
| 2 | SS34 | Library:SMA_L4.3-W2.6-LS5.2-RD | D1, D2 |
| 2 | TPS5430DDAR | Library:ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U3, U5 |
| 2 | VAL** | Library:mouse-bite-2mm-slot | mouse-bite-1, mouse-bite-2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R54 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2N7002 | Library:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U21 |
| 1 | 4.7uF | Library:C_0402_1005Metric | C16 |
| 1 | AO3400A | Library:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J32 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J43 |
| 1 | Crystal | Library:CRYSTAL-SMD_L11.5-W4.8-LS12.7 | Y1 |
| 1 | ESP32 Jumpers | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | IP2721 | Library:TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U4 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM358DR2G | Library:Dual LM358 | U25 |
| 1 | M7 | Library:SMA_L4.3-W2.6-LS5.2-RD | D17 |
| 1 | MJD44H11J | Library:MJD44 NPN | U22 |
| 1 | STM32G030C8T6 | Library:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL_1 | U8 |
| 1 | TS-1187A-B-A-B | Library:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | U20 |
| 1 | TYPE-C_6P | Library:TYPE-C-SMD_TYPE-C-6P | U1 |
| 1 | XC6206P332MR | Library:XC6206 | U9 |
The 195 most common of 198 parts.
More from Sitengwu/IOT_Retro_Display_EEE4022S
2- 2 layers70 × 100 mm

- 2 layers41.5 × 50 mm

Similar boards
- 4 layers130 × 105 mm

HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 2 layers170 × 120 mm

- 2 layers98.9 × 91.4 mm

Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
204 parts17MIT - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 2 layers115.8 × 48.3 mm

- 2 layers76 × 95.8 mm

- 2 layers100 × 85 mm

ESP32 MediaCarrier routed
xmyoot/esp32-media-carrier
ESP32 multimedia carrier board with 7–24 V DC buck regulator, 3.2 W Class-D I2S audio amp, WS2812 LED ring driver, and SPI TFT display header
97 partsMIT - 4 layers66 × 52 mm

Questions
How big is the Panelised PD+Display PCB?
It measures 143.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panelised PD+Display use?
198 parts, built around the STM32G030C8T6, TPS5430DDAR, IP2721 and LM358DR2GH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panelised PD+Display KiCad files?
From the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub, at the commit this page was made from: the board is KiCad/Panelised_PD+Display/Panelised_PD+Display.kicad_pcb and its schematic KiCad/Panelised_PD+Display/LED Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panelised PD+Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sitengwu before reusing the design.