

Retro Display Module
- Size
- 70 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 155
- Nets
- 135
- Pads
- 471
- Tracks, vias
- 818, 78
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Jul 2024
- Updated
- 27 Mar 2025
Overview
Retro Display Module is an open-source printed circuit board by Sitengwu, from the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub. It is a 2-layer board of 70 × 100 mm with 155 parts on 135 nets, routed with 818 tracks and 78 vias.
It is built around the STM32G030C8T6, LM358DR2GH and TPS5430DDAR, with the AO3401A, MJD44H11J and TS-1187A-B-A-B among its other parts. Its parts include 49 resistors, 34 connectors, 23 diodes, 21 ICs and 14 capacitors. It belongs with the retro computing and games and lEDs and displays boards and the STM32 boards of this library.
Main components
8STM32G030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2V~3.6V 32 Bit 44 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LM358DR2GH
SOIC-80℃~+70℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 5nA 70dB 7uV/℃ Built-in compensation、ESD Protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierTPS5430DDAR
SOIC-8-EP-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMJD44H11J
DPAK-55℃~+150℃ 1 NPN 160MHz 1V 20W 50uA 60 6V 80V 8A NPN DPAK Bipolar (BJT) ROHSNexperiaBipolar (BJT)TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesXC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
155| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | XL-1615RGBC-WS2812B | Library:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +5 |
| 14 | AO3401A | Library:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | U1, U2, U4, U6, U10, U11, U13, U14, U15, U16, U18, U19, U20, U21 |
| 13 | 100k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R6, R20, R22, R24, R26, R29, R31, R37, R39, R43, R45 |
| 13 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J9, J10, J11, J20, J22, J23, J24, J25, J26, J28, J30, J32 |
| 12 | 1k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R21, R23, R25, R27, R30, R32, R38, R40, R44, R46 |
| 10 | 100 | Resistor_SMD:R_1206_3216Metric | R28, R33, R34, R35, R36, R41, R42, R47, R48, R49 |
| 7 | TestPoint | Library:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | 0.1uF | Library:C_0402_1005Metric | C2, C4, C6, C14 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R16, R17, R18 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13 |
| 4 | M3 | Library:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 10k | Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8, R9 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11, C12, C13 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J19, J27, J31 |
| 2 | 10pF | Library:C_0402_1005Metric | C1, C3 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | CFG | Library:CONN-SMD_YZF0002-38080-02 | J5, J15 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J21, J29 |
| 2 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1, J33 |
| 2 | GND | Library:CONN-SMD_YZF0002-38080-02 | J7, J17 |
| 2 | RX | Library:CONN-SMD_YZF0002-38080-02 | J4, J14 |
| 2 | SEL | Library:CONN-SMD_YZF0002-38080-02 | J6, J16 |
| 2 | TX | Library:CONN-SMD_YZF0002-38080-02 | J3, J13 |
| 2 | VCC | Library:CONN-SMD_YZF0002-38080-02 | J2, J12 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 220uF | Library:CAP-SMD_L3.5-W2.8 | C10 |
| 1 | 22uH | Library:IND-SMD_L7.3-W6.6_MHCI06030 | L1 |
| 1 | 2N7002 | Library:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U9 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 4.7uF | Library:C_0402_1005Metric | C5 |
| 1 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J18 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J34 |
| 1 | Crystal | Library:CRYSTAL-SMD_L11.5-W4.8-LS12.7 | Y1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM358DR2G | Library:Dual LM358 | U12 |
| 1 | M7 | Library:SMA_L4.3-W2.6-LS5.2-RD | D2 |
| 1 | MJD44H11J | Library:MJD44 NPN | U17 |
| 1 | SS34 | Library:SMA_L4.3-W2.6-LS5.2-RD | D1 |
| 1 | STM32G030C8T6 | Library:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL_1 | U5 |
| 1 | TPS5430DDAR | Library:ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U7 |
| 1 | TS-1187A-B-A-B | Library:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | U3 |
| 1 | XC6206P332MR | Library:XC6206 | U8 |
More from Sitengwu/IOT_Retro_Display_EEE4022S
2- 2 layers143.5 × 70 mm

- 2 layers41.5 × 50 mm

Similar boards
- 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers130 × 105 mm

HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 2 layers36 × 70 mm

- 2 layers170 × 120 mm

- 2 layers98.9 × 91.4 mm

Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
204 parts17MIT - 2 layers80 × 36 mm

Freepdk
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
60 parts21CC-BY-SA-4.0 - 4 layers100 × 68 mm

- 2 layers115.8 × 48.3 mm

Questions
How big is the Retro Display Module PCB?
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Retro Display Module use?
155 parts, built around the STM32G030C8T6, LM358DR2GH, TPS5430DDAR and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Retro Display Module KiCad files?
From the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub, at the commit this page was made from: the board is KiCad/Retro Display Module/Retro Display Module.kicad_pcb and its schematic KiCad/Panelised_PD+Display/LED Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Retro Display Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sitengwu before reusing the design.