2 layers100 × 100 mm
Relow solder hot plate
ldab/reflow-solder-hot-plate
USB-C powered, esp32s3 based, hot plate
52 parts1WTFPL
2 layers100 × 100 mm
HeatTable Base v0.9
DerSpatz/PCB-reflow-solder-table14Table version of the PCB heat plate with advanced features and swappable heat plate
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 57
- Pads
- 267
- Tracks, vias
- 385, 285
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Sep 2022
- Updated
- 29 Dec 2022
Overview
HeatTable Base v0.9 is an open-source printed circuit board by DerSpatz, from the DerSpatz/PCB-reflow-solder-table repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 82 parts on 57 nets, routed with 385 tracks and 285 vias.
It is built around the IP2721, ITR8307/S17/TR8(B) and B5819W, with the DC-005-5A-2.5, IRLR8726 and MLT-9650 among its other parts. Its parts include 26 capacitors, 22 resistors, 7 ICs, 6 diodes and 5 connectors. It belongs with the STM32 boards of this library.
Main components
9
IP2721
TSSOP-16-40℃~+85℃ 1C 3V~25V 5V、15V、20V PD 2.0、PD 3.0 Power Receiver Controller TSSOP-16 USB PD ROHSINJOINICInterface - Specialized
ITR8307/S17/TR8(B)
SMD-4PSMD-4P Reflective Optical Interrupters ROHSEverlight ElectronicsReflective Optical Interrupters
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
DC-005-5A-2.5
插件-20℃~+70℃ 2.5mm 24V 5A 6.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSXKB ConnectionDC Power Connectors
IRLR8726
TO-252-55℃~+175℃ 1 N-channel 1.4V 103nC@10V 181W 3.88mΩ@10V 30V 352pF 392pF 5.672nF 90A TO-252 MOSFETs ROHSTECH PUBLICMOSFETs
MLT-9650
SMD-20℃~+70℃ 2.7kHz 30mA 3V~7V 5.5mm 5V 85dB 9.6mm 9.6mm Active Buzzer (Built-in Driving Circuit) Electromagnetic SMD SMD Buzzers ROHSJiangsu Huaneng ElecBuzzers
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
TYPE-C-31-M-17
SMD-30℃~+80℃ 1 20V 3,000 Cycles 5A 6.8mm 6P Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
WSP4409A
SOP-8-55℃~+150℃ 1 P-Channel 10mΩ@10V 15A 2.5W 2.7V 3.5nF 30V 635pF 645pF 72nC@4.5V P-Channel SOP-8 MOSFETs ROHSWinsok SemiconMOSFETs
README
README.mdPCB-reflow-solder-table
Table version of the PCB heat plate with advanced features and swappable heat plate
This design is not yet tested and was not built yet. Currently there's no firmware yet. I am not able to write the code, so feel free to contribute.
Schematic is pretty well documented, you can find most info you'll need there.
Todo:
- write firmware
- check actual mechanical device
- write better readme ;-)
Send me a message if you need gerbers for the actual heat plate.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 8 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C18, C19, C20, C21, C22, C23, C24, C25 |
| 6 | 220u/35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4, C5, C6 |
| 4 | 3k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R22 |
| 4 | 680 | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R15, R16, R17 |
| 3 | 150 | Resistor_SMD:R_0805_2012Metric | R3, R4, R21 |
| 3 | 6mm | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R19, R20 |
| 2 | 18V | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 200mA | Fuse:Fuse_1206_3216Metric | F2, F3 |
| 2 | 470p | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R13, R14 |
| 2 | 6m | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | INA180A2 | Package_TO_SOT_SMD:SOT-23-5 | U3, U4 |
| 1 | 1.25mm SMD | Connector_Molex:Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J5 |
| 1 | 1x03x2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 21k | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C26 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 2x10xP1.27mm | User:PinHeader_2x10_P1.27mm_Horizontal_XKB_X1321WR-2x10J-C40D18 | J2 |
| 1 | 5.1mm | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW4 |
| 1 | 5A | Fuse:Fuse_BrightKing_BK30-500 | F1 |
| 1 | 78M33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | DC-005-5A-2.5 | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | G | TestPoint:TestPoint_THTPad_D1.7mm_Drill1.0mm | TP3 |
| 1 | IP2721 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | IRLR8726 | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | IRS44273L | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ITR8307-S17-TR8 | OptoDevice:Everlight_ITR1201SR10AR | U7 |
| 1 | LMT85 | Package_TO_SOT_THT:TO-92_Inline | TEMP1 |
| 1 | MLT-9650 | Buzzer_Beeper:CUI_CMI-9653S-SMT | BZ1 |
| 1 | O | TestPoint:TestPoint_THTPad_D1.7mm_Drill1.0mm | TP2 |
| 1 | RED/GREEN | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | LED1 |
| 1 | SS34 | Diode_SMD:D_SMA | D5 |
| 1 | SSD1306 | User:0.91Inch-OLED-Module | OLED1 |
| 1 | STM32G030Fx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | TYPE-C-31-M-17 | User:USB_C_Receptacle_HRO_TYPE-C-31-M-17_Handsoldering | USB1 |
| 1 | V | TestPoint:TestPoint_THTPad_D1.7mm_Drill1.0mm | TP1 |
| 1 | WSP4409A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
Similar boards
- 4 layers137.4 × 82.6 mm
Lcd standard-5R
rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
179 parts - 2 layers100 × 100 mm
Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT - 2 layers100 × 112.5 mm
- 2 layers93.4 × 42.6 mm
- 2 layers100 × 120 mm
Dcc station
cc90202/DCC-esp32
DCC command station for ESP32-C6 — NMRA-compliant model railroad controller in Rust
82 parts12 - 4 layers56 × 28 mm
Bx tacho
dazchi/bx-tacho
Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.
51 parts3GPL-3.0 - 2 layers88 × 85 mm
Questions
How big is the HeatTable Base v0.9 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HeatTable Base v0.9 use?
82 parts, built around the IP2721, ITR8307/S17/TR8(B), B5819W and DC-005-5A-2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HeatTable Base v0.9 KiCad files?
From the DerSpatz/PCB-reflow-solder-table repository on GitHub, at the commit this page was made from: the board is HeatTable-Base-v0.9/HeatTable-Base-v0.9.kicad_pcb and its schematic HeatTable-Base-v0.9/HeatTable-Base-v0.9.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HeatTable Base v0.9 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).