

Hotplate01 1
- Size
- 100 × 112.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 41
- Pads
- 126
- Tracks, vias
- 219, 34
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Dec 2024
- Updated
- 22 Dec 2024
Overview
Hotplate01 1 is an open-source printed circuit board by hughminhphan, from the hughminhphan/hotplate repository on GitHub. It is a 2-layer board of 100 × 112.5 mm with 41 parts on 41 nets, routed with 219 tracks and 34 vias.
It is built around the B5819W, IRLR8726TRPBF and PN2222A, with the WSP4409A among its other parts. Its parts include 13 resistors, 8 capacitors, 3 diodes, 3 transistors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesIRLR8726TRPBF
TO-252-55℃~+175℃ 1 N-channel 1.8V 2.15nF 205pF 23nC 30V 5.8mΩ@10V 75W 86A TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETsPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)WSP4409A
SOP-8-55℃~+150℃ 1 P-Channel 10mΩ@10V 15A 2.5W 2.7V 3.5nF 30V 635pF 645pF 72nC@4.5V P-Channel SOP-8 MOSFETs ROHSWinsok SemiconMOSFETs
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R5, R6, R7, R15 |
| 4 | 680u/16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C3, C4, C5 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R11, R12, R13 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric | R4, R8, R9 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad1.3mm | NT1, NT2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 5A | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | IRLR8726TRPBF | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | LED_KRGB | LED_THT:LED_D5.0mm-4_RGB | D3 |
| 1 | LMT85 | Package_TO_SOT_THT:TO-92_Inline | TEMP1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q3 |
| 1 | SSD1306 | User:0.91Inch-OLED-Module | OLED1 |
| 1 | WSP4409A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
More from hughminhphan/hotplate
1- 2 layers77.3 × 35.5 mm

Similar boards
- 2 layers100 × 100 mm

Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT - 2 layers100 × 100 mm

Relow solder hot plate
ldab/reflow-solder-hot-plate
USB-C powered, esp32s3 based, hot plate
52 parts1WTFPL - 2 layers100 × 100 mm

HeatTable Base v0.9
DerSpatz/PCB-reflow-solder-table
Table version of the PCB heat plate with advanced features and swappable heat plate
82 parts14MIT - 2 layers82 × 52 mm

EmoePower V1.0
emoestudio/EmoePower
A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.
72 parts20GPL-3.0 - 2 layers99.9 × 79.3 mm

Led controller
azaslavskis/WLED-Controller
Simple project that takes care of LED strips and connect them using esp32 to home assistant interface
65 partsMIT - 2 layers

SolderReflowPlate
bikeNomad/SolderReflowPlate
RP2040-powered PCB solder reflow plate with replaceable heaters and better temperature control
48 parts - 2 layers152.4 × 101.6 mm

8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers33.7 × 66 mm

Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0
Questions
How big is the Hotplate01 1 PCB?
It measures 100 × 112.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hotplate01 1 use?
41 parts, built around the B5819W, IRLR8726TRPBF, PN2222A and WSP4409A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hotplate01 1 KiCad files?
From the hughminhphan/hotplate repository on GitHub, at the commit this page was made from: the board is pcbdesignsDEMO/hotplate/hotplate01/hotplate01_1/hotplate01_1.kicad_pcb and its schematic hotplate01/hotplate01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hotplate01 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.