2 layers220 × 329.2 mm
Control Boards
nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
148 parts9.8kApache-2.0
2 layers112 × 75.2 mm
AQUARIUMCONTROLLER
psych0d0g/ESP8266_FishTank4IOT ESP8266 Fishtank Controller
- Size
- 112 × 75.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 80
- Pads
- 185
- Tracks, vias
- 253, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20201002)
- Created
- 8 Jul 2018
- Updated
- 22 Nov 2020
Overview
AQUARIUMCONTROLLER is an open-source printed circuit board by psych0d0g, from the psych0d0g/ESP8266_FishTank repository on GitHub, published under the MIT licence. It is a 2-layer board of 112 × 75.2 mm with 47 parts on 80 nets, routed with 253 tracks and 30 vias.
It is built around the PCA9685PW. Its parts include 20 connectors, 14 resistors, 9 ICs and 1 capacitor.
Main components
1README
README.mdESPtank
IOT ESP8266 Fishtank Controller
ESP8266 Powered Fishtank controller
Tested and developed on LoLin NodeMCU 1.0 ESP8266 Board
PLEASE NOTE: this software is licensed under the MIT license, but used librarys might use other licenses.
Simplified Schematics
The full fritzing schematic file can be downloaded here
Screenshots
Live status Page of the Controller
Settings page to adjust light and target temps together with the Day/Night mode
Current Features
- Measures Temperature from connected NTC 100k thermistor or i2c MLX IR Contactless Temp sensor
- Controls connected FAN using PID PWM
- Displays current Temperature and FAN speed on animated ajax gauges in Browser or on attached i2c Oled screen
- Reads connected Ultrasonic Distance sensor to report on water level (WiP)
- publishes sensor readings to a defined MQTT Server
Dependencies
Check Platformio.ini for dependencies
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 9 | Conn_01x02 | Library:CUI_TB003-500-P02BE | J7, J8, J9, J10, J11, J14, J15, J16, J19 |
| 8 | LDD-L | Library:LDD-L | U2, U3, U4, U5, U6, U7, U8, U9 |
| 4 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3, J4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R13, R14 |
| 2 | Conn_01x15_Female | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J12, J13 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | DCDC BUCK | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J17 |
| 1 | PCA9685PW | Library:SOP65P640X110-28N | U1 |
| 1 | PWM Fan1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | PWM Fan2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | PWM Fan3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J18 |
| 1 | Ultrasonic Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J20 |
The 44 most common of 47 parts.
Similar boards
- 4 layers100.1 × 60.2 mm
Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 2 layers94 × 79 mm
- 2 layers130 × 120 mm
- 2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44 - 2 layers130.6 × 112 mm
- 2 layers156.2 × 168.9 mm
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
236 parts24 - 2 layers
Questions
How big is the AQUARIUMCONTROLLER PCB?
It measures 112 × 75.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AQUARIUMCONTROLLER use?
47 parts, built around the PCA9685PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AQUARIUMCONTROLLER KiCad files?
From the psych0d0g/ESP8266_FishTank repository on GitHub, at the commit this page was made from: the board is schematics/KiCad/AQUARIUMCONTROLLER.kicad_pcb and its schematic schematics/KiCad/AQUARIUMCONTROLLER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AQUARIUMCONTROLLER design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).