2 layers92.5 × 61.2 mm
2 layers
HB LC Dim6PWM CV
stan23/myPCBs21Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 40
- Pads
- 203
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 May 2019
- Updated
- 11 Feb 2024
Overview
HB LC Dim6PWM CV is an open-source printed circuit board by stan23, from the stan23/myPCBs repository on GitHub. It is a 2-layer board with 57 parts on 40 nets.
It is built around the ATMEGA328P-AU, CC1101RGP and R-78E3.3-0.5, with the DS18B20, PCA9685PW and IRF3708S-VB among its other parts. Its parts include 17 resistors, 10 connectors, 9 capacitors, 7 diodes and 6 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
R-78E3.3-0.5
SIP,11.5x7.6mmDC-DC Power ModulesYLPTEC
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
PCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED Drivers
IRF3708S-VB
TO-263(D2PAK)-55℃~+175℃ 1 N-channel 1.15nF 120W 20V 6.6nF 600mV 600pF 65nC@4.5V 6mΩ@4.5V、9mΩ@2.5V 85A N-Channel TO-263(D2PAK) MOSFETs ROHSVBsemi ElecMOSFETs
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
AskSinAnalyzer/README.mdAskSin Analyzer PCB 
Eine Platine für den AskSinAnalyzer von Jérôme.
Weitere Infos sind im Wiki
Gehäuse
Ein Gehäuse gibt es auf Thingiverse
Bilder
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 | Resistors_SMD:R_0805_HandSoldering | R10, R20, R30, R40, R50, R60 |
| 6 | 100k | Resistors_SMD:R_0805_HandSoldering | R11, R21, R31, R41, R51, R61 |
| 6 | IRF3708 | TO_SOT_Packages_THT:TO-220_Vertical | Q10, Q20, Q30, Q40, Q50, Q60 |
| 6 | SS14 | Diodes_SMD:D_SMA_Handsoldering | D10, D20, D30, D40, D50, D60 |
| 5 | 100n | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C7, C9 |
| 5 | LED1 | Connectors:bornier2 | J4, J30, J40, J50, J60 |
| 3 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R4, R5 |
| 1 | 10u | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 10u/50V | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 1k5 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 1u | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 22u/6.3V | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 8M | myResonators:Resonator_SMD_muRata_CSTCC-CSTCE-universal-3pin_7.2x3.0mm_HandSoldering | Y1 |
| 1 | ANT | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J1 |
| 1 | AT24CS32 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | ATmega328P-AU | myHousings:TQFP-32_7x7mm_Pitch0.8mm_HandSoldering | U2 |
| 1 | CC1101 | myRadioModules:CC1101_SMD_noGDO2_Antenna | U3 |
| 1 | DS18B20 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U5 |
| 1 | FTDI | myPinHeaders:Pin_Header_Straight_1x06_Pitch2.54mm_Tight_Fit | J11 |
| 1 | ISP | myPinHeaders:Pin_Header_Straight_2x03_Pitch2.54mm_Tight_Fit | J10 |
| 1 | LED | LEDs:LED_0805_HandSoldering | D1 |
| 1 | LED2 | Connectors:bornier2 | J20 |
| 1 | PCA9685PW | Housings_SSOP:TSSOP-28_4.4x9.7mm_Pitch0.65mm | U4 |
| 1 | Power | Connectors:bornier2 | J2 |
| 1 | R-78E3.3-0.5 | Converters_DCDC_ACDC:DCDC-Conv_Recom_R-78HBxx-0.5 | U1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW1 |
More from stan23/myPCBs
7- 2 layers32 × 58 mm
HB UNI Sen CAP MOIST
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
38 parts21 - 2 layers62 × 37.4 mm
HB LC Dim5PWM CV AskSinDuino32Shield
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
36 parts21 - 2 layers59.7 × 27.9 mm
- 2 layers69.9 × 46.2 mm
- 2 layers34.3 × 17.8 mm
- 2 layers50 × 17.8 mm
Similar boards
- 2 layers56 × 55.4 mm
- 2 layers213.6 × 127.5 mm
- 2 layers100 × 46.3 mm
Micro generator test machine
ujkhm/micro-generator-test-machine
ESP32 MPPT for micro-generator output measurement.
51 partsMIT - 2 layers40.3 × 21.5 mm
Magsafe trigger
jonathonlui/magsafe-trigger
Schematic and PCB design for using MagSafe 2 power adapter to power other things
12 parts18 - 2 layers70 × 70 mm
- 2 layers90 × 50 mm
- 2 layers34 × 74 mm
- 2 layers51 × 61 mm
Questions
What parts does the HB LC Dim6PWM CV use?
57 parts, built around the ATMEGA328P-AU, CC1101RGP, R-78E3.3-0.5 and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HB LC Dim6PWM CV KiCad files?
From the stan23/myPCBs repository on GitHub, at the commit this page was made from: the board is HB-LC-Dim6PWM-CV/HB-LC-Dim6PWM-CV.kicad_pcb and its schematic HB-LC-Dim5PWM-CV_AskSinDuino32Shield/HB-LC-Dim5PWM-CV_AskSinDuino32Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HB LC Dim6PWM CV design in my own project?
Its repository states no licence, so its author keeps all rights: ask stan23 before reusing the design.