2 layers30 × 58 mm
2 layers70 × 70 mm
LightControl
HeisenbergGER/LightControlA car rear light model with remote control
- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 36
- Pads
- 102
- Tracks, vias
- 166, 16
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Mar 2023
- Updated
- 29 Mar 2023
Overview
LightControl is an open-source printed circuit board by HeisenbergGER, from the HeisenbergGER/LightControl repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 70 mm with 32 parts on 36 nets, routed with 166 tracks and 16 vias.
It is built around the ATMEGA328P-PU, VR10S05 and IRF3708S-VB. Its parts include 6 capacitors, 6 resistors, 4 connectors, 3 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
VR10S05
SIP,11.6x8mm1 1A 5V 8V~36V 93% SIP,11.6x8mm DC-DC Power Modules ROHSXP PowerDC-DC Power Modules
IRF3708S-VB
TO-263(D2PAK)-55℃~+175℃ 1 N-channel 1.15nF 120W 20V 6.6nF 600mV 600pF 65nC@4.5V 6mΩ@4.5V、9mΩ@2.5V 85A N-Channel TO-263(D2PAK) MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdLightControl
Here you can find all project files for the LightControl Project, including schematics, PCB-designs, fabrication files and renderings.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | IRF3708 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 30pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | SolderJumper Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10uF / 50V | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C1 |
| 1 | 150 / 1/10W | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 16Mhz, 20pF | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 22uF / 25V | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C2 |
| 1 | 3.5A | Resistor_SMD:R_1206_3216Metric | F1 |
| 1 | 500 / 1/4W | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | Barrel_Jack 2.1mm / 2.5A | CUI:CUI_PJ-202B | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | SML-310MT - GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SML-310VT - RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-5_1x05_P2.54mm_Horizontal | J2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | VR10S05 | Package_SIP:SIP3_11.6x8.5mm | U1 |
More from HeisenbergGER/LightControl
1Similar boards
- 2 layers213.6 × 127.5 mm
- 2 layers
- 2 layers50 × 100 mm
Parrot imu
LucienMorey/parrot_imu
This design will host an IMU board for the Parody tripedal robotic platform. It will expose connect an IMU to the teensy 4.1 microcontroller with the ability to deliver this data over CAN bus and over an ethernet…
29 parts3MIT - 2 layers67.8 × 64 mm
- 2 layers
- 2 layers40.3 × 21.5 mm
Magsafe trigger
jonathonlui/magsafe-trigger
Schematic and PCB design for using MagSafe 2 power adapter to power other things
12 parts18 - 2 layers56 × 55.4 mm
- 2 layers100 × 46.3 mm
Micro generator test machine
ujkhm/micro-generator-test-machine
ESP32 MPPT for micro-generator output measurement.
51 partsMIT
Questions
How big is the LightControl PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightControl use?
32 parts, built around the ATMEGA328P-PU, VR10S05 and IRF3708S-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightControl KiCad files?
From the HeisenbergGER/LightControl repository on GitHub, at the commit this page was made from: the board is mainboard/mainboard.kicad_pcb and its schematic mainboard/mainboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightControl design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).