alpauna/WidebandO2One4First Wideband O2 Controller for Bosch LS 4.9 Sensors
BaseWideBand is an open-source printed circuit board by alpauna, from the alpauna/WidebandO2One repository on GitHub. It is a 2-layer board with 5 parts on 5 nets, routed with 14 tracks and 0 vias.
It is built around the VR10S05, RUEF600 and UMJ325KB7106KMHT. Its parts include 2 capacitors, 1 diode and 1 fuse. It belongs with the sensors and measurement boards of this library.
First Wideband O2 Controller for Bosch LS 4.9 Sensors. I hope to add more complex controllers in the future that is why I named it "WidebandO2One" Also, because it is going to control only one sensor. I plan on a two as well and will add that to my Megasquirt projects.
So far, I only have the schematics done. Code to follow shortly, but loosely based on Arduino shield code from here.
Note: All Schematics are written in KiCad.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C1812C206K3RLCAUTO | sama:CAPC4532X370N | C2 |
| 1 | RUEF600 | sama:RUEF600 | F1 |
| 1 | UMJ325KB7106KMHT | sama:CAPC3225X280N | C1 |
| 1 | V8PAN50-M3_I | sama:V8PAN50M3I | D1 |
| 1 | VR10S05 | sama:VR10S05 | PS1 |
LucienMorey/parrot_imu
This design will host an IMU board for the Parody tripedal robotic platform. It will expose connect an IMU to the teensy 4.1 microcontroller with the ability to deliver this data over CAN bus and over an ethernet…
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts, built around the VR10S05, RUEF600 and UMJ325KB7106KMHT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alpauna/WidebandO2One repository on GitHub, at the commit this page was made from: the board is Schematics/BaseWideBand/BaseWideBand.kicad_pcb and its schematic Schematics/BaseWideBand/BaseWideBand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alpauna before reusing the design.