2 layers20.5 × 24.8 mm
2 layers31.2 × 39.4 mm
Flash Station
psi-4ward/HMSensor-FlashStation4Helper PCB to flash Asksin++ HMSensor PCBs
- Size
- 31.2 × 39.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 17
- Pads
- 36
- Tracks, vias
- 52, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Mar 2020
- Updated
- 13 Apr 2020
Overview
Flash Station is an open-source printed circuit board by psi-4ward, from the psi-4ward/HMSensor-FlashStation repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.2 × 39.4 mm with 8 parts on 17 nets, routed with 52 tracks and 8 vias.
Its parts include 6 connectors, 1 capacitor and 1 switch. It belongs with the home automation and IoT boards of this library.
README
README.mdHMSensor-FlashStation
Hilfsplatine um HMSensor PCBs mit Hilfe von PogoPins einzuspannend und zu flashen.
HMSensor versucht eine universelle Hardware-Basis für AskSin++ Sensoren und Aktoren zu sein.
- HMSensor PCB from pa-pa
- HMSensor Documentation on asksinpp.de
Auf dem Testaufbau sind P75-B1 Pogo Pins verbaut.
:bangbang::bug: Fehler in v1.0 :bangbang:
- RX/TX ist nicht gedreht gegenüber dem USB-UART. Entweder FTDI über JumperWire anschließen und RX/TX drehen oder den Fehler mit Draht auf der Platine beheben.
- RESET Kondensator fehlt
Features
- DIP-Schalter um die Versorgungsspannungen zu schalten.
- VCC-Jumper: z.B. um eine Strommessung zwischen zu schalten.
- 5x2 Pin ISP Header, kompatibel mit Diamex oder USBasp
- FTDI Header
Changelog / Notes
v1.1
- Fehler Behoben im PCB-Design: RX/TX ist nicht gedreht gegenüber dem USB-UART
- RESET Kondensator hinzugefügt
Lizenz
MIT
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | HMSensor Pogo 1 | footprints:PogoPad_5x | J5 |
| 1 | HMSensor Pogo 2 | footprints:PogoPad_5x | J4 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | VCC Jumper | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J6 |
| 1 | VCC Switch | Button_Switch_THT:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW1 |
| 1 | Vin 3.3V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Flash Station PCB?
It measures 31.2 × 39.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flash Station use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flash Station KiCad files?
From the psi-4ward/HMSensor-FlashStation repository on GitHub, at the commit this page was made from: the board is Flash-Station.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flash Station design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).