Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers30 × 60 mmUpLink, the printed circuit board in 3D

    UpLink

    radeeyate/UpLink

    HAB Payload

    37 parts4
  • 2 layers180 × 131.1 mmCCController, the printed circuit board in 3D

    CCController

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    92 parts4MIT
  • 2 layers30.2 × 19 mmXbox-360-Battery Pack, the printed circuit board in 3D

    Xbox-360-Battery Pack

    Ralim/Xbox-360-Battery-Pack

    Basic LiFePo4 battery pack for Xbox360 controllers

    20 parts4MIT
  • 4 layers21 × 51 mmRugged pico, the printed circuit board in 3D

    Rugged pico

    rallekralle11/Dact-pico

    Pin-compatible with the pi pico but with many protective features.

    125 parts4
  • 2 layers15 × 65 mmGB DMG PSU, the printed circuit board in 3D

    GB DMG PSU

    rallekralle11/DMG_PSU

    Affordable replacement power board for the DMG gameboy which can provide -18v for the original display

    32 parts4CERN-OHL-P-2.0
  • 4 layers53.3 × 68.6 mmUnoq power shield, the printed circuit board in 3D

    Unoq power shield

    ramalamadingdong/pcb-agent

    Design a PCB end to end with an agent: CSV source of truth, idempotent build passes, containerized KiCad+Freerouting, and checks that run on the fab output.

    56 parts4GPL-3.0
  • 2 layers28.6 × 39 mmWatch, the printed circuit board in 3D

    Watch

    ramonimbao/stm32_watch

    A DIY STM32-based Watch

    39 parts4MIT
  • 2 layers53.1 × 34 mmViparspectra adapter, the printed circuit board in 3D

    Viparspectra adapter

    Ranthalion/viparspectra-adapter

    Adapater to control Viparspectra reef leds

    34 parts4
  • 2 layers33 × 50 mmHema console, the printed circuit board in 3D

    Hema console

    rapha-tech/ESP32-hema-console

    New PCB for the small console from hema to use an ESP32

    59 parts4
  • 4 layers90.8 × 33.2 mmSram, the printed circuit board in 3D

    Sram

    raszpl/FIC-486-GAC-2-Cache-Module

    FIC-486-GAC-2 Cache Module reproduction

    24 parts4GPL-3.0
  • 4 layers71.8 × 40.5 mmBioamplifier, the printed circuit board in 3D

    Bioamplifier

    RauLLorenzon/DIY_EEG

    8 Channel EEG board, based on the ADS1299

    95 parts4
  • 2 layers85.4 × 64 mmDaewooBackslotFMPAC, the printed circuit board in 3D

    DaewooBackslotFMPAC

    RBSC/Daewoo_CPC400_Upgrade

    Upgrading Daewoo CPC-400/400S into MSX2/MSX2+

    55 parts4
  • 4 layers17.8 × 41.9 mmRP2350-ProMini, the printed circuit board in 3D

    RP2350-ProMini

    red-scorp/RP2350-ProMini

    RP2350-based board with footprint of Arduino ProMini

    46 parts4
  • 2 layers80 × 96 mmProgrammer Board, the printed circuit board in 3D

    Programmer Board

    Reid-n0rc/LMS-6_Interface_Board

    Interface to the LMS-6 radiosonde carde edge connector.

    55 parts4GPL-3.0
  • 2 layers66.1 × 17.8 mmPaula Int Adapter, the printed circuit board in 3D

    Paula Int Adapter

    reinauer/Paula-Int-Adapter

    Cheap "Action Replay" clone for Amiga 500/2000

    7 parts4
  • 2 layers62.5 × 47.5 mmC64UserPortMidi, the printed circuit board in 3D

    C64UserPortMidi

    relic-se/C64UserPortMidi

    Simple MIDI input and output interface using Commodore 64 user port. Utilizes an ATtiny2313 microcontroller and 6n138 opto-isolator.

    25 parts4GPL-3.0
  • 4 layers72.8 × 82.1 mmHalberd v2, the printed circuit board in 3D

    Halberd v2

    RemkoPr/airo-halberd

    The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.

    77 parts4
  • 2 layers25 × 22.6 mmUSlime, the printed circuit board in 3D

    USlime

    ReSummit/uSlime

    Micro form of SlimeVR trackers using BNO085

    48 parts4GPL-3.0
  • 2 layers90 × 25 mmST7789 Shim, the printed circuit board in 3D

    ST7789 Shim

    RetroLoom/sed1200emu

    A Raspberry Pi Pico display replacement for the Roland MT-32, with a modern TFT/OLED, MIDI VU meters, and MIDI buffer-overflow protection.

    16 parts4GPL-3.0
  • 2 layers19.9 × 19.9 mmTRS-80-Model I Power Supply, the printed circuit board in 3D

    TRS-80-Model I Power Supply

    RetroStack/TRS-80-Model-I-Power-Supply

    A power supply for the TRS-80 Model I

    4 parts4MIT
  • 4 layers238.1 × 207.2 mmSegaSaturn VA0 Repro, the printed circuit board in 3D

    SegaSaturn VA0 Repro

    RGBeter/Sega_Saturn_VA0.5_Reproduction

    Reproduction schematics and PCB of the Sega Saturn VA0.5 Main board

    422 parts4CERN-OHL-S-2.0
  • 4 layers99.5 × 65 mmEcho, the printed circuit board in 3D

    Echo

    rh1tech/echo

    Echo: ESP32-Based VGA Board

    181 parts4