
Frank zx
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)


riban-bw/I2C-Hardware-Controller
A hardware controller providing rotary encoders, switches and potentiometer values via I2C

RichardRozehnal/Atari-SIO2SD-Igi-Version
SIO2SD disk drive emulator for 8bit Atari.

RichCini/MacRedux
Redraws/reimplementations of various legacy Macintosh boards.

rishikesh2715/RP2040-Motion-Sense-Board
A microcontroller PCB based on the RP2040 MCU from Raspberry Pi with a on-board high performance IMU, 2S LiPo battery charging circuit, 32 MB quad SPI flash memory, and bunch of GPIO breakouts.

rmingon/ch32v006-dev-board
Open-source CH32V006 RISC-V dev board — KiCad hardware (schematic + PCB), USB-C power, 3.3 V LDO, SWD/CH340C, and a PD1 blink example.

rmingon/Cogless
Open-source single-chip FOC ESC. One RISC-V MCU (CH32M007) with integrated gate driver, current-sense PGA and regulators drives a 4S / 30V power stage on a 45×40mm 4-layer board. KiCad sources under CERN-OHL-P v2.


rob-g2-365/waveshare_epaper_picture_frame
E-Ink Picture Frame using and Atmega 328P




RoboticsBrno/RB3201-RBControl
RB3201-RBControl (RBC) is a universal controller for hobby robots.

RoboticsBrno/RB3206-ELKS
💡 ELKS aka ESP Learning Kit Starter is a development board for the ESP32-S3 microcontroller.






roddersuk/Apple-IIcx-PSU-ATX-Adapter
Apple Mac IIcx PSU ATX Adapter

RodrigoCAndrade/LIONv3-R
The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

