
BackupProjects allisonbarfield personal 3 20250219
allisonmb/game-gear
Each aspect of the project is linked below, with README files indicating their functionality, how to run them, and known bugs.

Reproduction schematics and PCB of the Sega Saturn VA0.5 Main board
SegaSaturn VA0 Repro is an open-source printed circuit board by RGBeter, from the RGBeter/Sega_Saturn_VA0.5_Reproduction repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 238.1 × 207.2 mm with 422 parts on 843 nets, routed with 38,680 tracks and 2,945 vias.
It is built around the 74LS245SC, 74VHC04M and HRW0202ATL-E, with the 2SA812 and 2SC1623 among its other parts. Its parts include 124 capacitors, 93 resistors, 25 fuses, 22 ICs and 8 connectors.
Reproduction schematics and PCB of the Sega Saturn VA0.5 Main board

These PCBs are NOT TESTED! I HAVE NOT MADE OR TESTED THEM AND YOU DO SO AT YOUR OWN RISK. They SHOULD work as they were designed through tracing the original PCB, but bugs may appear and should be disclosed in the issues tab if encountered. Building these requires skills in microsoldering, QFP soldering, hot air rework, and Mega Drive troubleshooting. It is highly recommended you start with a set of known working parts from a donor Sega Saturn VA0-VA1, other units do not share the same BOM.
Support is not officially provided by RGBeter with building or debugging these PCBs.
Sega used a 4 layer PCB for the original Sega Saturn, and ran VCC and GND planes internally, with a few signal lines as well. I was unable to scan the internal layers of this PCB, so those were routed based on the known top and bottom layers. This reproduction requires an SH-1 PCB that contains both the CDB and OCU custom chips. These PCBs were only used on pre-VA1 Saturn systems, and are not reproduced at this time. However, the exact donor chips can be found on a VA1 saturn.
"Gerbers_Saturn_VA0.5.zip" Contains gerber files to fabricate your own boards, do note that these do not contain BOM or POS files for PCBA, and you will need to generate them for your specific manufacturer of choice from the KiCad source files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 70 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C103, C104, C105, C106, C107, C108, C115, C116, C117, C118, C119, C120, C127 +54 |
| 36 | 10K | Resistor_SMD:R_0805_2012Metric | R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115 +20 |
| 35 | ~ | Venus:Venus_EMI | EM1, EM2, EM10, EM11, EM12, EM13, EM14, EM15, EM16, EM17, EM18, EM19, EM20, EM21, EM22, EM23 +19 |
| 25 | 0 | Resistor_SMD:R_0805_2012Metric | F2, FB5, FB9, FB10, FB13, JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP10, JP11, JP12, JP13 +9 |
| 19 | NOT USED | Capacitor_SMD:C_0805_2012Metric | C33, C34, C36, C45, C46, C47, C48, C49, C65, C92, C93, C94, C95, C96, C102, C125 +3 |
| 13 | 1u | Capacitor_SMD:C_0805_2012Metric | CE1, CE5, CE7, CE8, CE9, CE10, CE11, CE12, CE13, CE14, CE17, CE39, CE40 |
| 10 | 100 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R43, R44, R126, R127, R128, R129, R130 |
| 10 | 10u | Capacitor_SMD:CP_Elec_4x3 | CE15, CE16, CE20, CE21, CE23, CE31, CE42, CE47, CE48, CE52 |
| 8 | 100u | Inductor_SMD:L_1206_3216Metric | L1, L2, L3, L4, L5, L6, L8, L9 |
| 8 | 10k | Resistor_SMD:R_Array_Convex_5x1206 | RA1, RA2, RA3, RA4, RA5, RA6, RA7, RA8 |
| 7 | 0 | Capacitor_SMD:C_0805_2012Metric | FB3, FB6, FB7, FB8, FB15, FB16, FB17 |
| 7 | 0.022u | Capacitor_SMD:C_0805_2012Metric | C1, C4, C21, C22, C28, C29, C32 |
| 7 | 100p | Capacitor_SMD:C_0805_2012Metric | C31, C109, C110, C121, C122, C123, C124 |
| 6 | 220u | Capacitor_SMD:CP_Elec_5x3 | CE24, CE25, CE26, CE27, CE28, CE29 |
| 6 | 4.7K | Resistor_SMD:R_0805_2012Metric | R47, R49, R50, R66, R124, R125 |
| 6 | 75 | Resistor_SMD:R_0805_2012Metric | R36, R37, R38, R39, R40, R41 |
| 5 | 100u | Capacitor_SMD:CP_Elec_5x3 | CE3, CE6, CE18, CE19, CE30 |
| 4 | 47u | Capacitor_SMD:CP_Elec_5x3 | CE35, CE49, CE50, CE53 |
| 4 | 510 | Resistor_SMD:R_0805_2012Metric | R143, R144, R150, R151 |
| 4 | 74LS245 | SegaSaturn:SOIC-20_Thin | IC26, IC27, IC29, IC30 |
| 4 | SDRAM-2M | 32X_MISC:SSOP-50 | IC12, IC13, IC15, IC16 |
| 3 | , , | ||
| 3 | * | Capacitor_SMD:C_0805_2012Metric | C17, C112, C114 |
| 3 | 1000p | Capacitor_SMD:C_0805_2012Metric | C25, C63, C64 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CE2, CE4, CE32 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R30, R31, R32 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric | R19, R29, R67 |
| 3 | 2.2K | Resistor_SMD:R_0805_2012Metric | R21, R33, R142 |
| 3 | 470p | Capacitor_SMD:C_0805_2012Metric | C2, C5, C26 |
| 3 | NOT USED | Resistor_SMD:R_0805_2012Metric | R96, R97, R99 |
| 3 | SDRAM-4M | 32X_MISC:SSOP-50 | IC3, IC4, IC11 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R45, R46 |
| 2 | 20p | Capacitor_SMD:C_0805_2012Metric | C50, C51 |
| 2 | 22u | Capacitor_SMD:CP_Elec_4x3 | CE33, CE34 |
| 2 | 2SC2214K | SegaSaturn:saturn_SOT23 | TR3, TR4 |
| 2 | 30K | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric | C23, C24 |
| 2 | 330u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | CE45, CE46 |
| 2 | 390 | Resistor_SMD:R_0805_2012Metric | R140, R148 |
| 2 | 3K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 5p | Capacitor_SMD:C_0805_2012Metric | C41, C111 |
| 2 | 68p | Capacitor_SMD:C_0805_2012Metric | C35, C129 |
| 2 | 74VHC04 | SegaSaturn:SOIC-14 | IC23, IC24 |
| 2 | HRW0202A | SegaSaturn:saturn_SOT23 | D2, D3 |
| 2 | ISS184 | SegaSaturn:saturn_SOT23_DIODE | D1, D4 |
| 2 | WORK_RAM_LOW | 32X_MISC:SOJ-40 | IC31, IC32 |
| 2 | ~ | SegaSaturn:CONTROLLER_CONN_UNUSED | CN2XA1, CN2XB1 |
| 2 | ~ | SegaSaturn:CONTROLLER_CONN | CN2A1, CN2B1 |
| 2 | ~ | SegaSaturn:CD_ACCESS_CONN | CN8, CN9 |
| 2 | ~ | SegaSaturn:FAN_LED_CONN | CN11, CN12 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R137 |
| 1 | 10u | Capacitor_SMD:CP_Elec_5x3 | CE37 |
| 1 | 110 | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 14.31818MHz | Crystal:Crystal_HC49-U_Vertical | X1 |
| 1 | 16K(1%) | Resistor_SMD:R_0805_2012Metric | R42 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R70 |
| 1 | 18p | Capacitor_SMD:C_0805_2012Metric | C44 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric | R48 |
| 1 | 220K | Resistor_SMD:R_0805_2012Metric | R149 |
| 1 | 27p | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 2SA812 | SegaSaturn:saturn_SOT23 | TR2 |
| 1 | 2SC1623 | SegaSaturn:saturn_SOT23 | TR1 |
| 1 | 3.6K | Resistor_SMD:R_0805_2012Metric | R26 |
| 1 | 315-5687 (SCSP) | SegaSaturn:SCSP | IC17 |
| 1 | 315-5688 (SCU) | Package_QFP:LQFP-208_28x28mm_P0.5mm | IC5 |
| 1 | 315-5689 (VDP1) | Package_QFP:PQFP-168_28x28mm_P0.65mm | IC10 |
| 1 | 315-5690 (VDP2) | Package_QFP:PQFP-160_28x28mm_P0.65mm | IC14 |
| 1 | 315-5744 | SegaSaturn:SMPC | IC9 |
| 1 | 315-5746 (PLL) | SegaSaturn:PLL | IC20 |
| 1 | 315-5778 | Package_QFP:PQFP-100_14x20mm_P0.65mm | IC6 |
| 1 | 32.768kHz | SegaSaturn:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | X4 |
| 1 | 330 | Capacitor_SMD:C_0805_2012Metric | FB4 |
| 1 | 330K | Resistor_SMD:R_0805_2012Metric | R68 |
| 1 | 33p | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 360 | Resistor_SMD:R_0805_2012Metric | R136 |
| 1 | 36K | Resistor_SMD:R_0805_2012Metric | R27 |
| 1 | 4.7u | Capacitor_SMD:CP_Elec_4x3 | CE22 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric | C40 |
| 1 | 4MHz | SegaSaturn:Resonator-3Pin_W8.0mm_H3.5mm | X3 |
The 392 most common of 422 parts.

allisonmb/game-gear
Each aspect of the project is linked below, with README files indicating their functionality, how to run them, and known bugs.



xyzz/pu-18
PCB thickness is 1.2mm. To generate production files you should use KiKit.

NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.



It measures 238.1 × 207.2 mm and has 4 copper layers, 1.6 mm thick.
422 parts, built around the 74LS245SC, 74VHC04M, HRW0202ATL-E and 2SA812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RGBeter/Sega_Saturn_VA0.5_Reproduction repository on GitHub, at the commit this page was made from: the board is SegaSaturn_VA0_Repro.kicad_pcb and its schematic SS_MAIN_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).