
Esquematico MR-22
MudRunnerBaja/Eletronica
Repositório a ser usado apenas pelos membros de eletrônica da equipe baja do Cefet-RJ
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

MudRunnerBaja/Eletronica
Repositório a ser usado apenas pelos membros de eletrônica da equipe baja do Cefet-RJ

multigcs/rio-iceshield
6Axis LinuxCNC-RIO Raspberry-PI FPGA-Hat - kicad project

mumrah/ninotnc-ble
The pogo pins (JLCPCB part number C5157269) are listed as Economy PCBA, but really require Standard PCBA which is quite a bit more expensive. Also, the PCBA process for these pins is not super precise.

Muriukidavid/esp-jtag
A JTAG programmer for esp targets based on esp-prog redone in KiCad

Muriukidavid/KiCAD-boards
My KiCAD designs of circuits am making over time. They are not all final versions, some are work in progress


mvanbrab/water-level
A project to measure the water level in a water reservoir, using a waterproof ultrasonic sensor


mwrnd/AlveoU25_JTAG_Adapter
Alveo U25 Debug Connector to Xilinx JTAG and UART and I2C Adapter


nader3254/ann-Medics
Remote medical device based on embedded Linux System with Qt5 beautiful Gui and android application included


ncicek/FT601-FPGA-interface-board
A breakout board for the USB3.0 interface chip meant for getting lots of data in or out of a FPGA. Designed to mount to a Lattice MachXO3 starter board.



neilenns/74HC165-breakout-board
74HC165 breakout board for use with Arduino or similar

nekoewen/titan-keyboard
A QMK-powered keyboard for gaming, especially fighting games



nikipoatgit/FlightController_H743
repo contains flight controller target files, PCB Gerber files, and the schematic.

nikitalita/Waveblaster-to-midi-module-adapter
Waveblaster header to midi module adapter. Allows the use of external midi modules on sound cards with waveblaster headers. Provides MIDI out and Audio input.

NilsRo/HotWaterRecirculatingPump
Automation of hot water recirculation pump via ESP32


Nitrokey/nitrokey-start-hardware
Crypto Stick is a USB 32-bit computer with STM32F103 processor and an OpenPGP smart card. It has a minimalistic design, the MCU is running at 72MHz, and it has a SWD port for main flash ROM update.