2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241
2 layers85 × 56 mm
NinoBLE Rev5
mumrah/ninotnc-ble5The pogo pins (JLCPCB part number C5157269) are listed as Economy PCBA, but really require Standard PCBA which is quite a bit more expensive. Also, the PCBA process for these pins is not super precise.
- Size
- 85 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 57
- Pads
- 133
- Tracks, vias
- 71, 21
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2021
- Updated
- 2 Jul 2025
Overview
NinoBLE Rev5 is an open-source printed circuit board by mumrah, from the mumrah/ninotnc-ble repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 56 mm with 14 parts on 57 nets, routed with 71 tracks and 21 vias.
It is built around the TF-01A. Its parts include 7 connectors, 2 capacitors, 2 resistors, 2 switches and 1 IC. It belongs with the RP2040 boards of this library.
Main components
1README
pcb/rev5/README.mdNinoTNC BLE rev5
The pogo pins (JLCPCB part number C5157269) are listed as Economy PCBA, but really require Standard PCBA which is quite a bit more expensive. Also, the PCBA process for these pins is not super precise. All the boards I received had slight alignment issues. If you order this board, be sure to check the pins for shorts.
In the next revision, I will source a different part for the pogo connector.
Files under the "fabrication" can be used for JLCPCB.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | Connector_Pin:Pin_D1.0mm_4.0mm_POGO | J1, J2, J6, J7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | Conn_01x01 | Module:NinoTNC_No_J5 | J3 |
| 1 | Conn_01x04 | Display:SSD1306-0.91-OLED-4pin-128x32 | J4 |
| 1 | Pico | Module:RPi_Pico_W_SMD_TH | U1 |
| 1 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | SW2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | TF-01A | Connector_Card:TF-01A | J5 |
Similar boards
- 2 layers145.7 × 107.8 mm
TRS IO++
apuder/TRS-IO
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
104 parts75GPL-3.0 - 4 layers100 × 68 mm
- 4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0 - 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 2 layers32.2 × 59.4 mm
- 4 layers268 × 152 mm
Drumboy Main
Randomwaves/Drumboy-Pro
📖 Developer Wiki — full hardware specs, schematics walkthrough, firmware architecture, DSP internals, and memory map.
346 parts10MIT - 4 layers62.9 × 88.6 mm
Bit block
Citrullin/Sovereign_Bunny_Stack
From web 3 unicorn fantasy to federated web 2.5 reality.
169 parts4
Questions
How big is the NinoBLE Rev5 PCB?
It measures 85 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NinoBLE Rev5 use?
14 parts, built around the TF-01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NinoBLE Rev5 KiCad files?
From the mumrah/ninotnc-ble repository on GitHub, at the commit this page was made from: the board is pcb/rev5/NinoBLE Rev5.kicad_pcb and its schematic pcb/rev5/NinoBLE Rev5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NinoBLE Rev5 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).