2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241
Overview
The TF-01A is a SD Card , Memory Card Connector made by HRO Electronics in a SMD package with 13 pins. 1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Pro:TF-01A, from EasyEDA Pro) and its footprint (EasyEDA_Cloud:TF-SMD_TF-01A, from EasyEDA), ready for a KiCad board. 151,958 are in stock at JLCPCB (part C91145). 76 open-source boards in 59 repositories on GitHub use it.
Symbol
Footprint
Parameters
8- Card Connection Mode
- Push-Push
- Card Type
- MicroSD Card (TF Card)
- Connector Type
- Connector and Ejector
- Height Above Board
- 1.85mm
- Length
- 14.5mm
- Rated Voltage (Max)
- 30V
- Supplementary Features
- With Locating Pins
- Width
- 14.8mm
Order codes
1- TF-01ALCSC C91145
Pinout
13| Pin | Name | Type |
|---|---|---|
| 1 | DAT2(RSV) | Input/output |
| 2 | CDDAT3(CS) | Input/output |
| 3 | CMD(DI) | Unspecified |
| 4 | VDD | Unspecified |
| 5 | CLK(SCLK) | Unspecified |
| 6 | VSS | Unspecified |
| 7 | DAT0(D0) | Input/output |
| 8 | DAT1(RSV) | Input/output |
| 9 | CD | Unspecified |
| 10 | GND | Unspecified |
| 11 | GND | Unspecified |
| 12 | GND | Unspecified |
| 13 | GND | Unspecified |
Open-source boards using it
All 76- 2 layers145.7 × 107.8 mm
TRS IO++
apuder/TRS-IO
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
104 parts75GPL-3.0 - 4 layers100 × 68 mm
- 4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0 - 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 2 layers32.2 × 59.4 mm
- 4 layers268 × 152 mm
Drumboy Main
Randomwaves/Drumboy-Pro
📖 Developer Wiki — full hardware specs, schematics walkthrough, firmware architecture, DSP internals, and memory map.
346 parts10MIT - 2 layers85 × 56 mm
NinoBLE Rev5
mumrah/ninotnc-ble
The pogo pins (JLCPCB part number C5157269) are listed as Economy PCBA, but really require Standard PCBA which is quite a bit more expensive. Also, the PCBA process for these pins is not super precise.
14 parts5MIT
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/hro/TF-01A" title="TF-01A in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/hro/TF-01A.jpg" alt="TF-01A" width="1200" height="900">[](https://pcbkit.io/parts/hro/TF-01A)Questions
Is there a KiCad symbol and footprint for the TF-01A?
Yes. The symbol is EasyEDA_Pro:TF-01A and the footprint EasyEDA_Cloud:TF-SMD_TF-01A, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TF-01A?
SMD, with 13 pins. Its footprint is drawn on this page.
Where is the TF-01A datasheet?
HRO Electronics publishes it: the Datasheet link on this page opens it.
Where can I order the TF-01A?
JLCPCB lists it as part C91145, with 151,958 in stock; the sellers' links on this page open their listings.
What can replace the TF-01A?
Parts like it in the library: the TF-01A by JXTCONN. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TF-01A?
76 boards in 59 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
