

FreeEEG8-alpha
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 38
- Pads
- 112
- Tracks, vias
- 740, 61
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2024
- Updated
- 7 May 2026
Overview
FreeEEG8-alpha is an open-source printed circuit board by neuroidss, from the neuroidss/FreeEEG8-alpha repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board with 33 parts on 38 nets, routed with 740 tracks and 61 vias.
It is built around the ADS131M08IPBSR, LP5907QMFX-3.3Q1 and CC0402KRX5R5BB224, with the RC0402JR-070RL, TSM-107-01-L-SV and ECS-2520MVLC-081.92-CN-TR among its other parts. Its parts include 14 connectors, 8 capacitors, 5 resistors, 3 ICs and 1 crystal.
Main components
6ADS131M08IPBSR
TQFP-32(5x5)-40℃~+125℃ 101dB 2.7V~3.6V 24 32kHz 350nA 7.5LSB 8 8.192MHz Auto calibration、Input buffer、Power-on reset、Bipolar input、Integrated modulator、Multi-chip synchronization、Synchronous triggering、Built-in digital filter Built-in External SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)LP5907QMFX-3.3Q1
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 120mV@(250mA) 12uA 250mA 3.3V 5.5V 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCC0402KRX5R5BB224
0402220nF 6.3V X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTRC0402JR-070RL
UncategorisedUnknown makerTSM-107-01-L-SV
SMD,P=2.54mm-55℃~+125℃ 1 2.54mm 2.54mm 5.84mm 7P Black Phosphor bronze Pin Header Surface Mount,Vertical Tin SMD,P=2.54mm Pin Headers ROHSSamtecPin HeadersECS-2520MVLC-081.92-CN-TR
SMD2520-4PSMD2520-4P Crystal Oscillators ROHSECSCrystal Oscillators
README
README.mdFreeEEG8-alpha
neuro_dungeon_gamepad_emulator_mimic
neuro_dungeon_gamepad_emulator_crystal
neuro_dungeon_gamepad_emulator_dash
neuro_dungeon_gamepad_emulator_wm
neuro_dungeon_gamepad_emulator_vr
run colab to get gerber&bom freeeeg8-alpha.kicad_pcb.zip

Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 220n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | ADC | Package_QFP:LQFP-32_5x5mm_P0.5mm | U1 |
| 1 | AIN0 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J1 |
| 1 | AIN1 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J2 |
| 1 | AIN2 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J3 |
| 1 | AIN3 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J4 |
| 1 | AIN4 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J5 |
| 1 | AIN5 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J6 |
| 1 | AIN6 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J7 |
| 1 | AIN7 | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J8 |
| 1 | AINREF | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J9 |
| 1 | AINREF_POGOPIN_ON | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AINREF_STACK_ON | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | AVDD | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | DVDD | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | GND | freeeeg8-alpha:pogo_pin_d5x10mm_smd | J10 |
| 1 | GND_ON | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | STACK_1 | freeeeg8-alpha:Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical_round_cut | J12 |
| 1 | STACK_2 | freeeeg8-alpha:Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical_round_cut | J13 |
| 1 | SYNC_ON | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | XIAO_1 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right | J14 |
| 1 | XIAO_2 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right | J15 |
| 1 | XTAL | freeeeg8-alpha:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm_HandSoldering_short | X1 |
| 1 | XTAL_ON | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | ~ | freeeeg8-alpha:FreeEEG8-alpha-title_5mm_SilkScreen | GL1 |
| 1 | ~ | freeeeg8-alpha:NeuroIDSS-url_5mm_SilkScreen | GL2 |
Similar boards
- 4 layers275 × 240 mm

- 4 layers180 × 120 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
21 parts - 2 layers33 × 57.4 mm

CareLite V122
OpenhimerLab/CareLite-GPIB
CareLite is an open-source, tiny, small USB-GPIB adaptor based on STM32 with temperature sensors.
37 parts9GPL-3.0 - 4 layers44.5 × 44.5 mm

QUT Autopilot Pixracer
Heckus/QUT-OpenFCU
The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.
145 parts - 4 layers100 × 65 mm

UPS
SyWier/Bidirectional-Power-Supply
Development of a bidirectional DC/DC power supply for battery applications.
149 parts - 2 layers

Tmp
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
57 parts39AGPL-3.0 - 4 layers78 × 59 mm

- 2 layers30 × 30 mm

ReCamera Gimbal
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
123 parts495Apache-2.0
Questions
What parts does the FreeEEG8-alpha use?
33 parts, built around the ADS131M08IPBSR, LP5907QMFX-3.3Q1, CC0402KRX5R5BB224 and RC0402JR-070RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FreeEEG8-alpha KiCad files?
From the neuroidss/FreeEEG8-alpha repository on GitHub, at the commit this page was made from: the board is freeeeg8-alpha.kicad_pcb and its schematic freeeeg8-alpha.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FreeEEG8-alpha design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
